Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    N5.2/5.8 Tiller Arm with Angle 31"

Murrays Part# 56-5551



31" tiller arm with angle for Nacra 5.2 and 5.8.

Nacra Sailing factory Part# 30153
    NACRA 5.2/5.8 TILLER AREM WITH ANGLE 31"
    NACRA
    $48.25
    Out of Stock
    H16 Mast Seal Plate

Murrays Part# 50-21090001

Hobie® factory replacement mast seal plate for Hobie® 16.
    H-16 MAST SEAL PLATE
    Hobie
    $5.39
    H17/18 Mast Seal Plate

Murrays Part# 50-61080000

Replacement mast seal plate for the Hobie 17 or Hobie 18. 

Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    $9.99
    P18/18.2/19 Mast Hound

Murrays Part# 56-6806

Mast Hound for P18, 18-2 and P19

Prindle Part# 6806
    PRINDLE 18/18.2/19 MAST HOUND
    NACRA
    $45.00
    Mast Head Casting

Murrays Part# 56-6002

Mast head casting for Prindle 16 and Escape

Nacra Sailing factory item# 30439
    PRINDLE MAST HEAD CASTING
    NACRA
    $75.00
    H17 Mast Halyard Hook

Murrays Part# 50-50403011

Hobie® factory mast halyard hook for Hobie® 17.

Hobie Part# 50403011
    H-17 MAST HALYARD HOOK
    Hobie
    $25.49
    Nicopress Oval 1/16" Copper/Zinc

Murrays Part# 002-1020
Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each.
    NICOPRESS OVAL 1/16" COPPER/ZINC
    Misc
    $0.34
    Prindle 18 Mast Base Casting

Murrays Part# 56-6805

Black anodized mast base casting fits Prindle 18 only.

Nacra Sailing factory item# 30453
    PRINDLE 18 MAST BASE CASTING
    NACRA
    $61.00
    MARINE GOOP TUBE
    Misc
    $11.99
    Main Halyard Hook

Murrays Part# 56-6812

Main halyard lock (hook) or all Prindles and older Nacras.

Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    $45.00
    KONA Rudder/Foil for Torqeedo 503/1003

Murrays Part# 80-0210



KONA Rudder/Foil. Increase steering control and maneuverability of the KONA Deck Boat when added to your Torqeedo electric motor. No holes to drill.
    TORQEEDO KONA RUDDER FOIL 503/1003
    Torqeedo
    $150.00
    NACRA COUNTERSUNK LOWER RUDDER GUDGEON
    NACRA
    $29.95
    Inter Rudder Eye Adjustment Screw
Murrays Part# 56-1000
Rudder adjustment eye screw for all Inters
Nacra Sailing factory item #30000
    NACRA INTER RUDDER EYE ADJUSTMENT SCREW
    NACRA
    $20.00
    H18 Illustrated Part List

Murrays Part# 50-87166810

Hobie® factory publication aids in identifying parts for the Hobie® 18 and 18SX.

The parts list is also available for free download at the Hobie Cat® Web site.
    H-18 ILLUSTRATED PARTS LIST
    Murrays Sports
    $1.00
    Out of Stock
    Hobie Stainless Steel Roller Furler Sleeve

Murrays Part# 50-61950001

Hobie Roller Furler Sleeve is a Hobie factory replacement stainless steel roller furler sleeve.

Hobie Part# 61950001
    HOBIE ROLLER FURLER SLEEVE (SS)
    Hobie
    $59.99
    Out of Stock
    Hobie Tiger Daggerboard Cover

Murrays Part# 50-72410001

Protect those daggerboards! This two pocket, woven polyethylene lined cover is padded and has a tough, Cardura (600 denier) outer material. It has carrying handles and Velcro closures. Very important for preventing dings, gouges, and scrapes while storing and trailering.
    HOBIE TIGER/FOX/FX DAGGERBOARD COVER
    Hobie
    $96.99
    Out of Stock
    H18 Dolphin Striker Rod

Murrays Part# 50-61170001

Hobie® factory replacement dolphin striker rod for Hobie 18.
    H-18 DOLPHIN STRIKER ROD
    Hobie
    $111.00
    The Gath helmet hinge kit: peak visor contains all the hardware for installing a peak visor to your Gath Gedi or Surf Convertible helmet.
    The Gath helmet hinge kit: peak visor contains all the hardware for installing a peak visor to your Gath Gedi or Surf Convertible helmet.
    GATH HINGE KIT: PEAK VISOR
    Gath
    $7.95
    Rear Hex Bolt 5/16 X 5.75" Outboard Bolt

Murrays Part# 56-F141


5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar.

Performance Sports Factory item# F141
    PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT
    NACRA
    $8.50
    H20 Gudgeon

Murrays Part# 50-40101301



Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts.

Hobie Part# 40101301
    H-20 GUDGEON
    Hobie
    $55.00
    Out of Stock
    Narrow Gudgeon

Murrays Part# 56-1011



Narrow gudgeon fits Nacra 5.0, 5.7, 6.0 and Prindle 18-2 and 19

Nacra Sailing factory item# 300007
    PRINDLE/NACRA NARROW GUDGEON
    NACRA
    $16.00
    GOOSENECK 'U' BRACKET

Murrays Part# 56-7810

Prindle Gooseneck 'U' Bracket

Gooseneck "U" bracket fits Nacra 5.2 and all Prindles.

Nacra Sailing factory item# 30980
    PRINDLE/NACRA GOOSENECK 'U' BRACKET
    NACRA
    $24.00
    Getaway Spreader Pole End Cap
Murrays Part# 50-37500031
Hobie® factory replacement end cap for Getaway spreader pole
Hobie Part# 37500031
    GETAWAY SPREADER POLE END CAP
    Hobie
    $14.99
    Out of Stock
    HOBIE 20 DOWNHAUL SHEAVE - 40700541

Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.  

SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    $9.99
    PRINDLE DOLPHIN STRIKER ROD 11.25"*

The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.
    PRINDLE DOLPHIN STRIKER ROD 11.25"
    NACRA
    $106.00
    PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD
    NACRA
    $99.00
    H16 Dolphin Striker Post

Murrays Part# 50-20140001

Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    $69.99
    Out of Stock
    DAKINE PRIMO FOOTSTRAP-BLACK
    Dakine
    $29.00
    Clevis Pin 1/4 x 2-1/4"

Murrays Part# 56-4587

1/4 x 2-1/4" clevis pin for all Inter rudder assemblies.

Used to hold tiller crossbar assembly to tendon.

Nacra sailing factory item# 30428
    CLEVIS PIN 1/4 x 2 1/4"
    NACRA
    $4.00
    Chain Plate "Turbo"

Murrays Part# 50-10300000

Hobie® factory replacement chain plate for Hobie® 14 Turbo. Use three 6-4 rivets (#19-5031) for installation.
    H-14 CHAIN PLATE "TURBO"
    Hobie
    $19.99
    Bow Tang

Murrays Part# 56-1810

Bow tang for Prindle 15, 16, 18 and Escape

Nacra Sailing factory item# 30386
    PRINDLE/ESCAPE BOW TANG
    NACRA
    $8.00
    Out of Stock
    Boom End Cap H14/16 Forward
Murrays Part# 50-10740011
Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
    H-14/16 FORWARD BOOM END CAP
    Hobie
    $16.99
    Out of Stock
    H14/16 Boom End Cap AFT

Murrays Part# 50-10741031




Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation.
Hobie® Part# 10741031
    H14/16 AFT BOOM END CAP
    Hobie
    $34.99
    Book: Fiberglass Boat Repair & Maintenance

Murrays Part# 45-1030
    BOOK: FIBERGLASS BOAT REPAIR AND MAINTENANCE
    3M
    $6.25
    Bolt 5/16-18 X 2"

Murrays Part# 50-8040331

Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System.

Hobie Part# 8040331
    BOLT 5/16-18 X 2"
    Misc
    $1.39
    T-9 Boeshield 4oz was developed by The Boeing Company for lubrication and protection of aircraft components. It is a combination of solvents, lubricants, and waxes designed for penetration, moisture displacement, lubrication and protection. Boeshield T-9® dries to a thin waxy film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints.
    T-9 BOESHIELD 4oz
    T-9
    $9.99
    H20 Assembly Manual

Murrays Part# 50-43450001

Printout of the Miracle 20 PDF. Includes tuning guide in the back.
    H-20 ASSEMBLY MANUAL
    Murrays Sports
    $5.00
    #2 Swege-It Kit

Murrays PN 33-0012

The #2 Swage-It Kit includes swage-it tool for 1/16", 3/32" and 1/8" oval sleeves. Made in the USA.
    #2 SWAGE-IT KIT
    Misc
    $27.99
    NACRA 5.2 1-PIECE 74" WIDE TRAMPOLINE-BLACK
    Murrays Sports
    $510.00
    H18SX/21sc WING TRAMPOLINES
Murrays Hobie 18SX and 21SC Wing Trampolines. Lace on. Sold as a pair.
Compare to Hobie part number 68040255
Not compatible with the Hobie 18 Magnum.
    H18SX/21sc WING TRAMPOLINES

Murrays Hobie 18SX and 21SC Wing Trampolines.  Lace on.  Sold as a pair.  

Compare to Hobie part number 68040255

Not compatible with the Hobie 18 Magnum.
    H18SX/21SC WING TRAMPOLINES-BLACK
    Murrays Sports
    $395.00
    Recently viewed