Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    NF18 Shroud 5/32" Black Wire Murrays Part# 002-5605-12
    N-F18 SHROUD 5/32" BLACK WIRE
    Murrays Sports
    NACRA BUSHING FAIRLEAD 5MM
    NACRA
    M8 x 35mm TORX COUNTERSUNK BOLT
    NACRA
    TIGER TRAMPOLINE WITH CURVED SIDES-BLACK
    Murrays Sports
    H20/21 Super Cruiser Compression Sleeve Murays Part# 50-31110001 This is the sleeve that goes over the dolphin striker inside the front crossbar of the H20. Hobie part# 31110001
    H20/21SC COMPRESSION SLEEVE
    Murrays Sports
    Hobie Main Traveler Track Access Plate Kit Murrays Part# 50-11810011 This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
    HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
    Hobie
    Harken 57mm Ratchet Block-Swivel Murrays Part# 28-2135 Harken 57mm Ratchet Block With Swivel and Switch allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. The on/off switch operates from both sides. Standard grip: medium/light air; 10:1 holding power
    HARKEN 57MM RATCHET BLOCK-SWIVEL
    Harken
    Out of Stock
    H20 Forward Outboard Sup Tube Murrays Part# 50-41150001
    H-20 FORWARD OUTBOARD SUP TUBE
    Hobie
    Out of Stock
    H-18SX WING STRUT
    Hobie
    H16 Kissme Jib Sheet & Traveler Upgrade Murrays Part 001-3150 This is a great way to upgrade your vintage Hobie 16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and lance cleats to facilitate smooth and accurate jib traveler position control. *The difference between this kit and the deluxe is the Lance Cleats vs the Cam Cleats. Lance cleats release to the side and were stock on many early model Hobies while the cam cleats release
    H-16 KISSME JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Out of Stock
    NACRA 5.7 FRONT CROSSBAR COMPLETE-USED
    NACRA
    Nacra Tiller Crossbar End Fitting Murrays Part# 56-30116 This part inserts into the end of a NACRA tiller X-bar.
    NACRA TILLER CROSSBAR END FITTING
    Murrays Sports
    SK78 Dyneema Whipping Twine Murrays Part# 21-WD1R Dyneema® whipping twine excels mostly due to its high breaking loads and smooth surface. It is easy to handle and requires no additional waxing. Specifications: Material: Dyneema® SK78 Diameter: 1 mm Length: 50 m Color: Red
    SK78 DYNEEMA WHIPPING TWINE
    Robline
    Sale
    Dakine Push Button Wind Spreader Bar Murrays Part# 32-368505 Size: 10" Best fits M and L harnesses Color: Black The Dakine Push Button Windsurf Spreader Bar comes with a metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
    DAKINE 10" PUSH BUTTON WIND SPREADER BAR
    Dakine
    Save $29
    Nacra Boom U-Bracket Murrays Part# 56-31063 The U-bracket which is on the gooseneck, this part is used to connect the boom to the mast.
    NACRA BOOM U-BRACKET
    NACRA
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    AIRUSH FLAGGING LINE
    Airush
    #13#Cam Plate 3in Stainless Steel TRPL Murrays Part# 28-HCP130 This is the cam plate for a harken block assembly to mount your cam cleat on a triple block.
    HARKEN #13 CAM PLATE 3" SS TRPL
    Harken
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    Nacra Boom Endcap Murrays Part# 56-31166 The boom endcap 40mm x 2mm, this is the round endcap used on all standard boom (non decksweeper).
    NACRA BOOM ENDCAP
    NACRA
    N-15 DIAMOND WIRE
    Murrays Sports
    Nacra Compression Pole Base Murrays Part# 56-31236 The base on the bowsprit for the compression pole.
    NACRA COMPRESSION POLE BASE
    NACRA
    Out of Stock
    H16 Masthead Sheave Spacer Murrays Part# 50-20614231 H16 Masthead Sheave Spacer. This is a replacement bearing surface for the comptip masthead sheaves in H16 mastheads. Fits Hobie Getaway Masthead Sheaves Hobie Part# 20644231
    H-16 MASTHEAD SHEAVE SPACER
    Hobie
    Nacra Rudder Casting Lower Eye Screw Wide Murrays Part# 56-31706 Rudder casting lower eye screw wide
    NACRA RUDDER CASTING LOWER EYE SCREW WIDE
    NACRA
    NACRA CONNECTIONPART TILLER/JOYSTICK FLEX
    NACRA
    Nacra PVC Ball Carbon Tiller Extension Murrays Part# 56-32460
    NACRA PVC BALL CARBON TILLER EXTENSION
    NACRA
    BBTalkin' Surf Hat Headset – Waterproof V2.0 Murrays Part# 52-2511H-1 This waterproof surf hat headset is designed for BBTalkin' Bluetooth waterproof communication devices. This new design allows for replacement of specific components if they become damaged or compromised. You can change out and replace just the speaker or microphone.
    BBTALKIN' SURF HAT HEADSET-WATERPROOF V2.0
    BBTalkin'
    NACRA DOLPHIN STRIKER ROD
    NACRA
    Out of Stock
    Hobie Halyard Twist Shackle Murrays Part# 50-60670000 Classic 3/16 inch stainless steel twist shackle from Hobie Cat. Hobie Part# 60670000
    HOBIE HALYARD TWIST SHACKLE
    Hobie
    RBS Batten Tensioner 15x7.6mm Webbing Style Murrays Part# 46-0015 These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles. Designed to be attached to the sail with a piece of webbing. Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver. Both the line and webbing styles are shown in the above picture. The loop style are laying on top of the webbing style.
    RBS WEBBING STYLE BATTEN TENSIONER 15x7.6MM
    RBS
    Harken 56mm Padeye - 2 Fasteners Murrays Part# 28-2759 This is an upgrade for your harken main traveler car. It is being used on the NACRA 17 Olympic boats to replace the failing eyestrap. It will typically require longer bolts/ screws. This is a heavy duty cast stainless steel padeye. Fits on Harken Car 2738 and 2756 Harken Part# 2759
    HARKEN 56MM PADEYE - 2 FASTENERS
    Harken
    Replacement part for the adjustable trapeze system found on modern NACRA catamarans. Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS NACRA Part # 30938
    NACRA TRAPEZE STOP
    NACRA
    HARKEN 40MM T2 LOOP SOFT-ATTACH BLOCK
    Harken
    The Harken 2149 40mm T2 tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
    HARKEN 40MM T2 SOFT-ATTACH BLOCK
    Harken
    Inter Front Crossbar Endcap Casting-Left Murrays Part# 56-2526 Nacra Inter Front Crossbar Endcap Casting-Left Fits all Inters, Inter 18 Inter 20
    NACRA FRONT CROSSBAR CASTING END CAP-LEFT
    NACRA
    H-18SX/21 WING END CASTING
    Hobie
    West Systems Epoxy 1 Quart with Hardener Murrays Part# 40-4103 The West Systems Epoxy QT w/ Hardener is a combination of 105 Epoxy Resin and 205 Hardener. It is used for shops and/or bigger jobs and lamination work. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, solid plastic with superior physical properties. The optional mini pumps (#40-4104) screw onto the resin and hardener to make dispensing and 5:1 metering easy and automatic.
    WEST SYSTEMS EPOXY WITH HARDENER
    West Marine
    West System Small Repair Kit Murrays Part# 40-4101 This West System Handy Repair Pack contains everything you need to complete small repairs around the boat, shop or home, and is perfect for ding repairs. The kit contains two West System 105 Resin/205 Hardener packets, and enough high-density filler to complete a variety of coating and bonding operations.
    WEST SYSTEM SMALL REPAIR KIT
    West Marine
    West System Epoxy Resin 1 Quart Murrays Part# 40-4103-1 West System 105 Epoxy Resin is the key component in a wide variety of boatbuilding, restoration, and repair projects. It is the base material of the West System family of products on which all of the West System compounds are built.
    WEST SYSTEM 105 EPOXY RESIN 1 QUART
    West Marine
    West System Plastic Boat Repair Kit with G/Flex Murrays Part# 40-6508 West System Plastic Boat Repair Kit G/Flex repairs plastic canoes, kayaks and inflatables made from HDPE, LDPE, ABS, PVC or polycarbonate plastic with the contents of this West System kit. The Plastic Boat Repair Kit features plastic-friendly G/flex 655 epoxy, and is assembled with the do-it-yourselfer in mind.
    WEST SYSTEM PLASTIC BOAT REPAIR KIT WITH G/FLEX
    West Marine
    Recently viewed