Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    H21 Special Edition Diamond Wire without Turnbuckle Murrays Part# 002-0595-20 Diamond wire without turnbuckle for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    H-18SX Shroud Roller Swaged 5/32" Black Wire Murrays Part# 002-0605-12 Single black shroud (sidestay) for Hobie® 18SX is hydraulically swaged for extra strength and a cleaner connection. Constructed to factory specifications. Compare to Hobie Cat® Part# 68793501
    H-18SX SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H18SX Diamond Wire without Turnbuckle Murrays Part# 002-0694-20 Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Compare to Hobie Cat® Part# 68750001
    H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    H18SX Bridle 5/32" Black Wire Murrays Part# 002-0615-22 Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications. Compare to Hobie Cat® Part# 60822001 Black or 60820001 White
    H-18SX BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    H18 Dimond Wire without Turnbuckle Murrays Part# 002-0494-20 Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required. The change to the left handed thread happened some time in the early 80's.
    H-18 DIAMOND WITHOUT TURNBUCKLE
    Murrays Sports
    H17 Sport Forestay 5/32" Murrays Part# 002-0345-32 Black forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812001
    H-17 SPORT FORESTAY 5/32-BLACK WIRE
    Murrays Sports
    H14 Turbo Jib Block Wire Murrays Part# 002-0124-80 Jib block wire for Hobie® 14 Turbo is constructed to factory specifications. Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram
    H-14 TURBO JIB BLOCK BLACK WIRE
    Murrays Sports
    Out of Stock
    H14 Turbo Upper Forestay with Swivel Murrays Part# 002-0134-01 Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications. Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Compare to Hobie Cat® #10810010
    H-14 TURBO UPPER FORESTAY WITH SWIVEL
    Murrays Sports
    Fast Eye Snap Brass 2-1/8" Murrays Part# 27-136120 2-1/8" brass snap hook is convenient, but should not be used in critical, high-load situations.
    FAST EYE SNAP BRASS 2-1/8"
    Misc
    Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
    CLAMCLEAT RACING MINI
    Clamcleat
    Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel) Murrays Part# 19-2237 Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut. This bolt is a replacement for item #56-F110 Comparable to Hobie Part# 8040211
    BOLT HEX HEAD 5/16-18 X 4.50" SS
    Misc
    Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel) Murrays Part# 19-2227 Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040)
    BOLT HEX HEAD 1/4-20 X 4.5" (SS)
    Misc
    Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    H14/17 Adjustable Batten Leech Caps Murrays Part# 012-2003 No more knots at the trailing edge. Adjust Hobie® 14 or Hobie® 17 sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line Hobie Part# 1521 Sold in packages of 6
    H-14/17 ADJUSTABLE BATTEN LEECH CAPS (6)
    Tren-Tec
    Batten Cap Leech Adjustable Foam 3/4" Murrays Part# 012-4080-1 Glue this adjustable 3/4" x 5/16" end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Sold individually
    3/4" ADJUSTABLE FOAM BATTEN CAP (EA)
    Tren-Tec
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    NACRA 500 DIAMOND WIRE DBL
    Murrays Sports
    Ronstan V Jam Boom Cleat Murrays Part# 21-0494 Classic V Jam Cleat used for furlers, control lines and downhauls on many beach cats from the 70s.  Product Specifications: Rope: 1/4" Weight: 0.5oz Fastener: 2x3/16" Length: 2 3/4" Fastener Hole Centers: 2 7/32" Ronstan Part# RF494
    RONSTAN V JAM BOOM CLEAT
    Ronstan
    Harken 75mm Block-Swivel Murrays Part# 28-2660 ​Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming. ​
    HARKEN 75MM BLOCK-SWIVEL
    Harken
    Impact Bucket Hat - Bump Cap The Surf - Foil Impact Bucket Hat is a bucket hat with a lightweight plastic and foam liner that makes it able to take light to medium impacts. Watersports specific design is great for Surfing, Kitesurfing, Foiling, Sailing, SUP, Kayak, and Windsurfing. - 360 degree brim with a stiff section in the front to protect your face and eyes from the sun. - Removable neck flap for additional sun protection - Chin strap for secure fit - Padded liner for impact resistance
    Impact Bucket Hat - Bump Cap The Surf - Foil Impact Bucket Hat is a bucket hat with a lightweight plastic and foam liner that makes it able to take light to medium impacts. Watersports specific design is great for Surfing, Kitesurfing, Foiling, Sailing, SUP, Kayak, and Windsurfing. - 360 degree brim with a stiff section in the front to protect your face and eyes from the sun. - Removable neck flap for additional sun protection - Chin strap for secure fit - Padded liner for impact resistance
    Impact Bucket Hat - Bump Cap
    Murrays Sports
    EASY RIGG TOOL BLUE
    Murrays Sports
    Sale
    Wave Batten Set Murrays Murrays Part# 30-3012 The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps. The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens. Hobie Part# 38016001
    FWC GP 2026 WAVE MAIN BATTEN SET
    Murrays Sports
    Save $51
    Getaway Mainsail (White) Murrays Part# 30-6005
    PRINDLE 19 6OZ DACRON JIB SAIL (WHITE)
    Murrays Sports
    FCS FIN SCREWS Ea
    Murrays Sports
    2182 Ronstan 3/16 Sailmakers Thimble is a great option for DIY dyneema rigging projects. The closed thimble prevents chaffing on your dyneema.
    3/16 Sailmakers Thimble
    Ronstan
    Coffee Marine Bridle Vane XL Murrays Part# 001-7080 compare to Hobie 7703
    XL Bridle Vane - Wave & 17
    Murrays Sports
    Out of Stock
    Rescue Step - Boat
    Hobie
    Out of Stock
    HOBIE WAVE SAIL BAG
    Hobie
    Save $7.04
    Out of Stock
    Miracle 20 double trap set
    Murrays Sports
    Save $45
    Out of Stock
    Getaway shroud set
    Murrays Sports
    Out of Stock
    Hobie Miracle 20 Bridle
    Hobie
    Save $45
    Harken 50 Cam-Matic Cleat 5/32" Delrin Ball Bearings Murrays Part# 28-HSB14 Delrin actual resin is a black material which excels in low to moderate-load applications. The Harken Bearing 5/32″ Delrin- Order 66 for Aluminum Cam-Matic Cleat (#28-0150) or order 46 for Carbo (#28-0365). Also for Harken small furlers 434, 162 and 163. 
    HARKEN 5/32" DELRIN BALL BEARINGS
    Harken
    O'PEN SKIFF MAST 390cm
    Tahe Outdoors
    WAVE TILLER CROSSBAR M20 STYLE Hobie PN 39521001
    HOBIE WAVE TILLER CROSSBAR M20 STYLE
    Hobie
    MURRAYS WAVE TRAVELER KIT
    Murrays Sports
    WAVE BATTEN CAPS Tren Tech main sail batten cap kit for the Hobie Wave.  Includes 3 large batten caps, 2 small batten caps and batten tie line.
    WAVE BATTEN CAPS
    Murrays Sports
    Out of Stock
    HOBIE STANDARD BRIDLE VANE Features snap-lock pin and wide indexing support for positive attachment to forestay adjuster. Durable, 7" mylar wind vane freely rotates on 12-1/2" long stainless rod. Wind indicator easily detaches with stainless pull ring. Fits all boats that use a 7- or 10-hole adjuster at the forestay-to-bridle connection. Use adapter #08-1451 to mount it to a Hobie roller furling drum as used on the Hobie Getaway and 18. Hobie item #CM7703.
    HOBIE STANDARD BRIDLE VANE
    Hobie
    CAN'T MISS HANDLE The Murrays molded can't miss handles are used to make Can't Miss Rings and J&H Handles. Used on all Hobie, Nacra and Prindle Catamarans.
    CAN'T MISS HANDLE The Murrays molded can't miss handles are used to make Can't Miss Rings and J&H Handles. Used on all Hobie, Nacra and Prindle Catamarans.
    CAN'T MISS HANDLE
    Murrays Sports
    Out of Stock
    GETAWAY WING TRAMPOLINES - GREY
    Murrays Sports
    The Hobie 16 Aussie upper forestay runs parallel to the Aussie Forestay and is for the jib halyard line. The Jib Halyard line raises and jib and controls the mast rake. It runs from the top of the jib, thru the fiddle blocks and down the mast to the halyard cleat. The Aussie system provides a 4:1 pulley system to allow for easy mast rake adjustment on the fly and the independent forestay provides redundant a safety system if the jib luff wire or the jib halyard were to break. Hobie part number 20810041
    H-16 AUSSIE UPPER FORESTAY
    Murrays Sports
    Recently viewed