Murrays Marine - Catamaran specialists

All

3135 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3135 products
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Prindle Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    PRINDLE SLOTTED RUDDER ARM
    NACRA
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    PRINDLE 18.2/19 OWNERS MANUAL
    Murrays Sports
    Nacra Pivmatic Assembly with Pin: Aluminum Cleat Murrays Part# 56-0266-1 Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
    NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
    NACRA
    Front Beam Strap Murrays Part# 56-2509 The Nacra Front Beam Strap is Nacra Sailing factory front beam strap #30068 fits the Nacra 5.2, 5.5, 5.5, 6.0 and 18SQ.
    NACRA FRONT BEAM STRAP
    NACRA
    Carbon Mast Head Murrays Part# 56-6602CAR Nacra mast head for a carbon mast. Nacra Part# 6602Car
    NACRA CARBON MAST HEAD
    NACRA
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    Out of Stock
    HEAVY DUTY HAND RIVET TOOL
    HP
    H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003
    H-16 JIB CAR SLIDE ONLY WITH WHEELS
    Hobie
    Out of Stock
    H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    Dolphin Striker Rod Washer Murrays Part# 56-F152 Washer for Prindle and Nacra dolphin striker rods. Performance Sports factory item# F152
    NACRA/PRINDLE DOLPHIN STRIKER ROD WASHER
    NACRA
    Dolphin Sticker Rod Nut Murrays Part# 56-F151 9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling. Performance Sports factory item #F151.
    NACRA DOLPHIN STRIKER ROD NUT
    NACRA
    Dolphin Striker Casting Murrays Part# 56-2009 Performance Sports factory dolphin striker casting for all Prindle Cats
    Prindle part numbers 2505, 2009 and 2009C
    PRINDLE DOLPHIN STRIKER CASTING
    NACRA
    Sale
    Dakine Hook Knife with Sheath Murrays Part# 32-919981 The DaKine hook knife uses two opposing stainless steel cutting blades with an anodized aluminum handle. Includes pocket sheath that is simple to mount anywhere on your harness or spreader bar for easy access. DaKine item #4620500. Dakine's kite knife comes in a sheath with a belt loop that is easily stored on your harness or spreader bar for easy access. These are great for emergency use, and are a must for all kitesurfers to be able to cut li
    DAKINE HOOK KNIFE WITH SHEATH
    Dakine
    Save $3
    Daggerboard Hold Down Tiger 50-F99501200 Hobie® factory daggerboard hold down for Tiger.
    TIGER DAGGERBOARD HOLD DOWN
    Hobie
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Beam Strap All N5.0 and 5.7 Murrays Part# 56-3510 Beam strap for front crossbars on all Nacra 5.0 and 5.7 models and rear crossbars on Nacra 5.0, 5.7 and 6.0. Nacra Sailing factory item #30095.
    NACRA FRONT BEAM STRAP
    Murrays Sports
    Windsurf Adjustable Outhaul Kit Murrays Part# 001-9520 Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed: Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind. Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind. Adjust the outhaul (sail shape) from either side, at any time.
    WINDSURF ADJUSTABLE OUTHAUL KIT
    Murrays Sports
    Cat Trax Washer & Cotter Pin Kit Murrays Part# 13-1401-7 Kit includes: Replacement washers and cotter pins for two Cat Trax beach wheels.
    CAT TRAX WASHER & COTTER PIN KIT
    Cat Trax
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    TURNBUCKLE COMPLETE 5/32"
    Misc
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    TRACKER HINGE PIN
    Hobie
    Tiger Diamond Wire Double without Turnbuckle Murrays Part# 002-6095-20 Double diamond wire without turnbuckle for Hobie® Tiger is constructed to factory specifications.
    TIGER DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    Swivel with Bulls-Eye (No Cleat) Murrays Part# 25-3011 This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately.
    SWIVEL WITH BULLS-EYE (NO CLEAT)
    Murrays Sports
    RUDDER PIN SPRING CLIP: 3/8
    Misc
    Stand Up Spring Conical Light Murrays Part# 21-0319 This soft, conical spring is used for Harken bullet block (e.g. Hobie® 16 jib traveler car and Hobie® spinnaker pole blocks).
    STAND UP SPRING CONICAL LIGHT
    Murrays Sports
    Ronstan Stainless Steel D Shackle, 5/32" Pin, Slotted Head Murrays Part# 21-0615 Ronstan stainless D shackle has 5/32" slot head pin. Features: High strength to weight ratio Premium quality, rated Grade 316 stainless steel bodies and pins
    RONSTAN STAINLESS STEEL D SHACKLE, 5/32" PIN, SLOTTED HEAD
    Ronstan
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    RONSTAN OPEN V-CLEAT FOR 3-6MM LINE
    Ronstan
    Ronstan Small Becket Block Murrays Part# 21-0188 Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs.
    RONSTAN SMALL BECKET BLOCK
    Ronstan
    Rivet AAP 6-4 (3/16 X 1/4) Murrays Part# 19-5011 A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet.
    RIVET AAP 6-4 (3/16 X 1/4)
    Misc
    Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
    RIVET AAP 6-10 (3/16 X 5/8)
    Misc
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    P19 Upper Forestay 5/32" Bare Wire Murrays Part# 002-2435-00 Bare upper forestay for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Prindle bridle wire
    PRINDLE 19 BRIDLE 5/32 BK
    Murrays Sports
    Prindle 16, P18 Jib Block Wire Murrays Part# 002-2224-00 Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
    PRINDLE 16/18 JIB BLOCK WIRE
    Murrays Sports
    Recently viewed