All Prindle 15 Parts

89 products

    89 products
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    RUDDER BLADE Prindle 15/16/18
    Murrays Sports
    Murrays 57mm Carbo 6:1 Mainsheet System Murrays Part# 28-61 The Murrays Harken 57mm Carbo 6:1 Mainsheet System is an improved low profile mainsheet system for Hobie 16.  By attaching a fairlead to the back side of the cleat mount the Murrays system does not need a becket on the lower block which makes the system more compact and gives sailors the ability to sheet in farther and or rake the mast back farther before having the mainsheet bottom out and go block to block.
    MURRAYS 57MM CARBO 6:1 MAINSHEET SYSTEM
    Harken
    Out of Stock
    TRAMP P15 BLACK 1pc BK so
    Murrays Sports
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    RUDDER CASTING ONLY RT PRINDLE
    Murrays Sports
    Out of Stock
    RUDDER CASTING ONLY LT PRINDLE
    Murrays Sports
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Out of Stock
    MAST STEP CASTING P15/16/18
    Murrays Sports
    SPARE PARTS KIT: PRINDLE
    Murrays Sports
    Out of Stock
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Prindle Rudder Refresh Kit
    Murrays Sports
    Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    RUDDER ARM SLOTTED P15/16/18
    Murrays Sports
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4 WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1 WITH LANYARD
    Misc
    PRINDLE SHROUD ANCHOR PIN 15/16/18 Updated
    Murrays Sports
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1
    Misc
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Prindle Bolt Plate Murrays Part# 56-2008 Bolt plate for dolphin striker fits Prindle 15, 16, 18, Escape, 18-2, 19, 19MX. Nacra Sailing factory item #30043.
    PRINDLE BOLT PLATE
    Murrays Sports
    Murrays Part# 001-7050 The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    RUDDER LOCKING BOLT PRINDLE
    Murrays Sports
    GOOSNECK BASE FITTING ALL
    Murrays Sports
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 (SS)
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2 WITH LANYARD
    Misc
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 ALUM
    Murrays Sports
    MAST HEAD CASTING P15
    Murrays Sports
    MAST BEARING 1/2 ROUND PRINDLE
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Misc
    Murrays Part# 001-2248-1 The Race Tramp Line Kit: Prindle - Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity. Because of Dyneema's characteristics, a smaller line than normal can be used, resulting in weight savings. The kit for Prindle 15, 16, 18 or Escape contains three lengths of Dyneema® line (two 11' pieces and one 22' piece of 3mm). The kit for Prindle 18.2 or 19 includes two 19' lengths of 3mm Dyneema® line.
    TRAMP LACE KIT P18.2/19 DYNMA
    Murrays Sports
    TRAMP LACE KIT RACE P16/18 DYNEEMA
    Murrays Sports
    GOOSENECK 'U' BRACKET N5.2
    Murrays Sports
    Out of Stock
    TILLER X-BAR END CAST PRINDLE
    Murrays Sports
    6" Access Port with Lip Murrays Part# 001-4210WH The 6" Access Port with Lip is standard on the Hobie 18 and newer Prindle cats and it is an excellent upgrade for older Prindles. Ports can be installed on any flat deck, including kayaks, where there is 8-1/2" of flat surface available. These ports come with the inner lip so they are compatible with the 6"cat bag. Does not include hardware, hardware options shown in the related items section below. White port is Murrays #01-4210WH. Compare to Hobie Cat® #
    PORT FLAT 6" SCREW W/LIP WHITE
    Sailing
    half round load spreader prindle rudder
    1/2 ROUND LOAD SPREADER PRINDLE
    Murrays Sports
    10 Hole Hobie shroud adjuster
    SHROUD STAY ADJUSTER 10-HOLE
    MISC
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    TILLER & RUDDER STIFF: PRINDLE
    Murrays Sports
    Batten Caps Leech Adjustable P16 Murrays Part#012-6003 No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail. Sold in packages of 9, includes batten tie lines.
    PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9)
    Tren-Tec
    MAIN HALYARD HOOK: H-14/16
    Hobie