All Prindle 15 Parts

98 products

    98 products
    Batten Cap Leech Adjustable H16 Jib Each

Murrays Part# 012-3004-1

No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap.

Sold Individually
    ADJUSTABLE LEECH JIB BATTEN CAP (EA)
    Tren-Tec
    $2.25
    Gooseneck Bolt

Murrays Part# 56-F131


3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles.

Performance Sports factory item # F131
    GOOSENECK BOLT
    NACRA
    $2.25
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" CLEVIS PIN
    Misc
    $2.00
    Hex Bolt5/16 X 4.25"
Murrays Part# 56-F104
Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
    HEX BOLT 5/16 X 4.25"
    NACRA
    $2.00
    Leech Cap Adjustable Main Prindle
Murrays Part# 012-6003-1
No more knots at the trailing edge. These Perfect Pocket leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail.
Sold individually
    P-16 MAIN ADJUSTABLE LEECH CAP
    Tren-Tec
    $2.00
    Out of Stock
    Black Mast Caution Decal

Murrays Part# 50-13440000


The Decal Mast Caution Black Hobie® factory caution decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.
    BLACK MAST CAUTION DECAL
    Hobie
    $1.99
    Decal Mast Caution Orange

Murrays Part# 13440010

Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.

Hobie Part# 13440010
    ORANGE MAST CAUTION DECAL
    Hobie
    $1.99
    Bolt Hex Head 1/4-20 X 2 (Stainless Steel)

Murrays Part# 19-2220

Stainless steel hex head bolt measures 1/4-20 x 2". Substitute for discontinued item #56-F124 and is a slightly longer replacement for #56-F191. Similar to Prindle F120
    BOLT HEX HEAD 1/4-20 X 2" (SS)
    Misc
    $1.00
    Prindle Rudder Lock Bolt Nut
Murrays Part# 56-4018
The Prindle Rudder Lock Bolt Nut is the factory replacement 3/8″ hex nut for rudder lock bolts on all Prindles.

Also used as the jam nut for adjuster screw on Nacra bridle foil assembly.
Nacra Sailing factory item #30420.
Prindle part number 4018
    Prindle rudder parts 4000, 4001, 4002, 4004, 4005, 006, 4007, 4009, 4012, 4010, 4014, 013, 4016, F115, F120
    RUDDER LOCK BOLT NUT
    NACRA
    $0.90
    Murrays PN 001-0053

The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
    RUDDER STIFFENING SPACER
    Murrays Sports
    $0.75
    Screw PHMS 1/4-20 X 1"
Stainless Steel

Murrays Part# 19-3020

Stainless steel, slotted pan head 1/4-20 x 1" machine screw to fasten mast bearing on pre-1990 Hobie® 18. Other uses include universal Prindle/Nacra bow plate and bow tang on Prindle 15/16/18/Escape.

Replaces Murrays item #56-F125.
    SCREW PHMS 1/4-20 X 1" SS
    Misc
    $0.70
    Prindle Rudder Lower Plastic Spacer

Murrays Part# 56-4014


Prindle Rudder Lower Plastic Spacer is used on the rudder systems of all Prindle models. Performance Sports factory item #4014. 9/16″ wide x 1/2″ diameter, 1/4″ hole.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    LOWER RUDDER PLASTIC SPACER
    NACRA
    $0.50
    Nylon Washer Internal Casting Prindle
Murrays Part# 56-F118
Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible.
Performance Sports factory item #F118
    NYLON WASHER INTERNAL CASTING
    NACRA
    $0.50
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    $0.45
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head
Murrays Part# 19-2915
Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112.
Also used in some Hobie Applications, compare to 8030111 Hobie Part.
Applications:
H18/18 SX/16 and Getaway
Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    $0.36
    WASHER #8 (WH NYLON)

Murrays PN 19-4006WH

White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    $0.35
    Nylon Spacer
Murrays Part# 56-4011
Prindle rudder spacer, Prindle part number 4011.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    RUDDER SPACER
    Murrays Sports
    $0.25
    Cotter Pin 3/32 X 3/4
Murrays Part# 19-1015
Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111.
Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc
    $0.18