Hobie mast parts: cheek block, downhaul, halyard, mast head, base, bearing, ball, luff track

Sailing Mast Parts

256 products

    Hobie, Nacra and Prindle mast parts: Halyard cleat, cheek block, gooseneck, downhaul, mast head, mast base, mast hinge, mast bearing, mast ball 

    256 products
    Out of Stock
    H-20 MAST ASSEMBLY
    Hobie
    H-16 MAST ASSEMBLY WITH COMP TIP
    Hobie
    Out of Stock
    hobie-18-mast-60610010
    H-18 MAST ASSEMBLY
    Hobie
    WAVE MAST ASSEMBLY (2 PIECE)
    Hobie
    Wave Comp Tip Murrays Part# 50-38582100 Hobie® factory replacement CompTip for Wave. A CompTip is the upper section of a Hobie mast. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    WAVE COMPTIP
    Hobie
    Out of Stock
    GETAWAY LOWER MAST
    Hobie
    Getaway Comptip Murrays Part# 50-37611100 Hobie Getaway CompTip factory replacement CompTip for Getaway is a special order item. A CompTip is the upper section of a Hobie mast built in and after 1986. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    HOBIE GETAWAY COMPTIP
    Hobie
    Out of Stock
    H20 Comtip Murrays Part# 50-40401210 Hobie® factory replacement Hobie 20 CompTip. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-20 COMPTIP
    Hobie
    Comp-Tip Assembly H16 Murrays Part# 50-20611100 New Comp Tip assembly for Hobie 16. Hobie Part# 20611100
    HOBIE 16 COMP-TIP ASSEMBLY
    Hobie
    Out of Stock
    H17 Comptip Assembly Murrays Part# 50-50611101 Hobie® factory replacement CompTip assembly for Hobie 17
    H-17 COMP-TIP ASSEBLY
    Hobie
    Out of Stock
    H18 Comptip Assembly Murrays Part# 50-60611100 Hobie® factory Hobie 18 CompTip Assembly for Hobie 18 mast. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-18 COMPTIP ASSEMBLY
    Hobie
    WAVE LOWER MAST
    Hobie
    BRAVO LOWER MAST
    Hobie
    Sale
    H14 Comp-tip Assembly Murrays Part# 50-10582100 Hobie® factory CompTip assembly for Hobie 14.
    H-14 COMP-TIP ASSEMBLY NOS
    Hobie
    Save $319
    Out of Stock
    NACRA F20C MAST BASE COMPLETE
    NACRA
    UNIVERSAL MAMA BOB MAST FLOAT The Hobie Mama Bob Universal Mast Float Kit aids in preventing your boat from going full turtle (mast straight down) when capsized, helping to prevent damage to your rig and sails should they contact the bottom. This model (Hobie® Cat #30112) is mast-side mounted system. The Universal Mama Bob float has been adapted for use as a shaft-mounted "universal" mast float that does not rotate, but is held in a fore-aft position in alignment with the mast for minimum drag while
    MAST FLOAT UNIVERSAL MAMA BOB
    Hobie
    This Hobie 16 Rigging set is a set of rigging for a Hobie 16 that was standard in 1995. This is a perfect upgrade your 70s, 80s, early 90’s boat to make it more modern.
    H-16 RIGGING KIT: 1995 SPEC BLACK RIGGING
    Murrays Sports
    O'PEN SKIFF MAST 390cm
    Tahe Outdoors
    Downhaul Kit 8:1 H18 Murrays Part# 001-2150 This is a performance upgrade downhaul kit that give increased performance control for your Hobie 18 Catamaran. The downhaul leads are run to the side of the boat for crew control and the loads are oriented to reduce sail tack damage that is common on the H18. It takes minutes to install with a rivet gun a drill and approximate measuring. The kit was born from a discussion at the 2023 NACs wherein many of the boats in Division 4 have a variation of the
    H-18 DOWNHAUL KIT 8:1
    Murrays Sports
    H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    Out of Stock
    Mast Float Mama Getaway Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    Out of Stock
    H17/20/Tiger Mast Base Murrays Part# 50-50416011 Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.
    H-17/20/TIGER MAST BASE
    Hobie
    H16 Aluminum Masthead Murrays Part# 51-16042710
    H-16 ALUMINUM MASTHEAD
    Hobie
    Out of Stock
    Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    DOWNHAUL KIT: CASCADE 8:1 H-20 UPGRADE
    Murrays Sports
    Out of Stock
    Bravo Mast Float With Straps And Buckles Murrays Part# 50-90600012 Hobie Bravo mast flat with strap. Found on current Bravo sailboats.
    BRAVO MAST FLOAT WITH STRAPS AND BUCKLES
    Hobie
    Out of Stock
    HOBIE 18 POWER DOWNHAUL KIT - 5:1 Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
    H-18 5:1 POWER DOWNHAUL KIT
    Murrays Sports
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    Out of Stock
    Sunfish Mast Murrays Part # 68-89023 This aluminum mast comes pre-installed with upper and lower mast cap for a complete and ready-to-use setup. Specifications: Material: Aluminum Length: 10’ Outer Diameter: 2 1/4″ Includes both upper and lower cap
    SUNFISH MAST
    Laser Performance
    H14/16 6:1 Downhaul Kit Murrays Part# 007-2089-1 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.  Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050) Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks. Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050). Hobie part number 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    WAVE DOWNHAUL KIT 3:1
    Murrays Sports
    O'Pen Skiff Cunningham Assembly Complete Murrays Part# 65-53289 Complete Cunningham hoist / downhaul. Includes line and pulleys Tahe Part# 53289
    O'PEN SKIFF CUNNINGHAM ASSEMBLY COMPLETE
    Tahe Outdoors
    Out of Stock
    H18 Mast Step Kit Murrays Part# 50-60180011 Hobie® factory replacement mast step kit for Hobie® 18 includes mast step casting, post, bearing, screw and washer. This is an upgrade for older Hobie 18's with threaded post.
    H-18 MAST STEP KIT
    Hobie
    Out of Stock
    Nacra F20C Mast Base Rotatorplate Murrays Part# 56-31209 Mast base rotatorplate for the Nacra F20 Carbon.
    NACRA F20C MAST BASE ROTATORPLATE
    NACRA
    Out of Stock
    H14 and Wave Comptip Masthead Murrays Part# 50-10602111 This is a replacement masthead for a Hobie 14 or Hobie Wave.
    H-14 AND WAVE COMPTIP MASTHEAD
    Hobie
    Getaway Luff Track Murrays Part# 50-37611151 Replacement luff track for the Hobie Getaway. 102" Hobie Part# 37611150, 37611151
    GETAWAY LUFF TRACK
    Hobie
    Out of Stock
    Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    H-16 COMP-TIP MAST HEAD
    Hobie
    Out of Stock
    H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
    H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
    Hobie
    N5.2 Dimond Wire with Turnbuckle and Straight Spreader Bar (First Generation) Murrays Part# 002-4294-20-1
    N-5.2 DIAMOND WIRE WITH TURNBUCKLE AND STRAIGHT SPREADER BAR (FIRST GENERATION)
    Murrays Sports
    H18 Diamond Wire Complete Murrays Part# 50-61750001 Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
    H-18 DIAMOND WIRE COMPLETE
    Hobie
    Recently viewed