Sailing Hull Parts

Sailing Hull Parts

138 products

    Hobie, NACRA and Prindle Hull parts.  Everything that attaches to the hull and transom of your boat.  Traction, pads, ports, drain plugs, gudgeons, rudder pins, foot straps and more.

    138 products
    Screw FHMS #8-32 X 1.25 (Nylon) Murrays Part# 19-1520BK Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white.
    SCREW FHMS #8-32 X 1.25" (BLACK NYLON)
    Misc
    Centerboard Spring Kit Prindle Factory centerboard spring kit for Prindle 18.2 and 19 includes 4 springs. Performance Sports factory item #1027.
    PRINDLE CENTERBOARD SPRING KIT
    NACRA
    O’Pen Skiff Boat Cover
    O’Pen Skiff Boat Cover
    MURRAYS OPEN SKIFF BOAT OCVER
    Murrays Sports
    Hobie Wave Bow Spreader Tang Murrays Part# 50-38120041 Replacement tang for Hobie Wave bow spreader. Hobie Part# 38120041
    WAVE BOW SPEADER TANG
    Hobie
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    SCREW STAINLESS STEEL #10 x 3/4 PHSM-PH
    Hobie
    Screw THMS 1/4-20 X 1-5/8" Murrays Part# 50-8030601 Hobie® factory replacement 1/4-20 x 1-5/8" screw. Hobie Part# 8030601
    SCREW THMS 1/4-20 X 1-5/8"
    Hobie
    Screw RHMS 1/4-20 X 1" Murrays Part# 50-8030211 Hobie® factory replacement round head machine screw measures 1/4-20 x 1". Measurements are diameter and threads per inch times grip length. Applications: Hobie 18 - Shroud anchor plate screw
    SCREW RHMS 1/4-20 X 1"
    Hobie
    Rudder Gudgeon Murrays Part# 56-1016 Rudder gudgeon for Prindle 15, 16 and 18 Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    H20 Gudgeon Murrays Part# 50-40101301 Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts. Hobie Part# 40101301
    H-20 GUDGEON
    Hobie
    Out of Stock
    H16 Gudgeon Casting Murrays Part# 50-50102011 Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag. Die cast aluminum construction Standard on all Hobie 16 catamarans Uses 8x #8030402 screw for installation (sold separately)
    H-16 GUDGEON CASTING
    Hobie
    Daggerboard Hold Down Tiger 50-F99501200 Hobie® factory daggerboard hold down for Tiger.
    TIGER DAGGERBOARD HOLD DOWN
    Hobie
    Prindle 18.2/19 Jib Block Wire 4-Way Murrays Part# 002-2424-20 Four-way jib block wire for Prindle 18-2 or 19 is constructed to factory specifications.
    PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
    CLAMCLEAT RACING MINI
    Clamcleat
    Out of Stock
    8" Twist-N-Seal Hatch  Murrays Part# 50-71702011 Twist-n-seal hatches have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring.
    8" TWIST-N-SEAL HATCH
    Hobie
    Flat Head Machine Screw #8-32 X 1.25 (White Nylon) Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white
    SCREW FHMS #8-32 X 1.25" (WHITE NYLON)
    Misc
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    Sunfish Gudgeon Bracket Murrays Part# 68-91054 The gudgeon bracket bolts to the transom of the SOL or Sunfish, providing a secure mounting point for the rudder head. Features: Made from stainless steel for durability and corrosion resistance Provides a strong and long-lasting attachment for the rudder Essential component for proper rudder installation Built to withstand the elements, ensuring reliable performance on the water.
    SUNFISH GUDGEON BRACKET
    Laser Performance
    Sunfish Auto Bailer Murrays Part# 68-91026 The bailer is mounted at the bottom of the cockpit and automatically drains excess water, helping to keep the cockpit dry. It can be easily opened and closed using the rubber cap. Features: Fits newer style Sunfish models (1973-present) 13/16″ thread length, which refers to the length of the cap Designed for efficient drainage and easy operation A reliable replacement for maintaining proper cockpit drainage.
    SUNFISH AUTO BAILER
    Laser Performance
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10X1/2" PHSMS-P
    Hobie
    Screw FHSMS #8 X 3/4 Stainless Steel Murrays Part# 19-1621 Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4" Compare to Hobie Part 8031501 Used to mount swivel jam cleat and Jib Car Stop
    SCREW FHSMS #8 X 3/4" (SS)
    Hobie
    Bow Tang Murrays Part# 56-1810 Bow tang for Prindle 15, 16, 18 and Escape Nacra Sailing factory item# 30386
    PRINDLE/ESCAPE BOW TANG
    NACRA
    Hobie 16 Hull
    H-16 LEFT RACE HULL-WHITE
    Hobie
    Out of Stock
    H-18 WING MOUNT HARDWARE KIT
    Murrays Sports
    O'Pen Skiff Drain Plug Housing Murrays Part# 65-53264 Drain plug support Tahe Part# 53264
    O'PEN SKIFF DRAIN PLUG HOUSING
    Tahe Outdoors
    O'Pen Skiff Top Cover Murrays Part# 65-102557 O'pen Skiff deluxe deck cover with ultraviolet protection Technical Specs:  Country of manufacture: China Material: Polyester Outside face material: Polyester Foam Thickness 3 mm Length 9'0" / 275 cm Tahe Part# 102557
    O'PEN SKIFF TOP COVER
    Tahe Outdoors
    Out of Stock
    N17 Progrip Set Murrays Part# 56-32324 NACRA 17 progrip set blue/white diamond, is the progrip set for the NACRA 17. From the full foiling version of the NACRA 17, we supplied all the Nacra 17s with this type of progrip.
    NACRA 17 PROGRIP SET
    NACRA
    Out of Stock
    NACRA BIG F18 INFUSION HULL STICKER
    NACRA
    Out of Stock
    Nacra F18 Infusion Stern Sticker (1 Hull) Murrays Part# 56-40158 Nacra F18 Infusion logo sticker for stern Size: 350 x 53 mm Clean the surface before attachment
    NACRA F18 INFUSION STERN STICKER (1 HULL)
    NACRA
    Out of Stock
    NACRA F18INF PROGRIP SET BLACK/GRAY (2018 & UP)
    NACRA
    Out of Stock
    6" Twist-N-Seal Gasket Murrays Part# 50-71701021 Twist-N-Seal Gaskets have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring. The round hatch seals around the edge of the cylinder and does not have to be held down against a flat surface to seal.
    6" TWIST-N-SEAL GASKET
    Hobie
    8" Twist-N-Seal Gasket Murrays Part# 50-71331001 Twist-N-Seal Gaskets have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring. The round hatch seals around the edge of the cylinder and does not have to be held down against a flat surface to seal.
    8" TWIST-N-SEAL GASKET
    Hobie
    Hobie Hull Cradle Bracket Murrays Part# 50-48020001 Sold individually
    HOBIE HULL CRADLE BRACKET
    Hobie
    New-Style 1003 Doubler Plate Murrays Part# 56-1013 New-style doubler plate for Inter #56-1003 Performance Sports factory item #1013
    NACRA NEW STYLE 1003 DOUBLER PLATE
    NACRA
    O'Pen Skiff Front Towing Handle Murrays Part# 65-52789 This is a replacement bow handle for the O'Pen Skiff. Fits O'Pen Bic or O'Pen Skiff sailboats. Tahe Part# 52789
    O'PEN SKIFF FRONT TOWING HANDLE
    Tahe Outdoors
    Inter Bolt Front Beam 3/8-16X4.5" Murrays Part# 56-F180 Socket head 3/8 x 4-1/2" front beam bolt for all Inters Compatible Boats:  Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance part# F180
    NACRA BOLT FRONT BEAM 3/8-16X4.5"
    NACRA
    NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"
    NACRA
    Out of Stock
    Sunfish White Coaming Murrays Part# 68-91080 The coaming on the Sunfish is designed to help deflect waves and spray, keeping the cockpit drier while sailing. Features: Color: White Provides protection from water splashing into the cockpit Durable construction for long-lasting use A functional part for a more comfortable sailing experience.
    SUNFISH COAMING
    Laser Performance
    Sunfish Bow Handle Murrays Part# 68-91026A The Metal Bow Handle is a sturdy and reliable deck-mounted accessory designed to make lifting, carrying, and maneuvering your boat effortless.
    SUNFISH BOW HANDLE
    Laser Performance
    Screw #10 x 1-1/4 PHSMS-P Murrays Part# 50-8030261 Tiller Hinge Screw for Hobie Fiberglass Tiller.
    SCREW #10 x 1-1/4 PHSMS-P
    Hobie
    Recently viewed