Sailing Hull Parts

114 products

    114 products
    WAVE UPPER PINTLE
    Hobie
    Screw 12x24x1 PH-LONG LOK*
    Misc
    Screw 1/4-20 x 5/8 PHMS-P Stainless Steel Murrays Part# 50-8030331 This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
    SCREW 1/4-20 x 5/8 PHMS-P SS
    Misc
    WAVE LOWER PINTLE
    Hobie
    SCREW RHMS 1/4-20 X 1"
    Misc
    RUDDER GUDGEON P15/16/18
    Murrays Sports
    HULL SEAL UNDER SEAT WAVE
    Hobie
    EZ LOC LOWER PINTLE
    Hobie
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    RHMS #12-24 X 1.25 (SS)
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20
    Misc
    Harken Standard Cam-Matic Cleat -150 Murrays Part# 28-0150 For high load/high-wear applications. Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Three rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.
    HARKEN STANDARD CAM-MATIC CLEAT-150
    Harken
    Flat Head Machine Screw #8-32 X 1.25 (White Nylon) Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white
    FHMS #8-32 X 1.25 (WHITE NYLON)
    Misc
    7/16UNC 17-4 SS Shroud Eye
    NACRA
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA DECK GRIP KIT
    Murrays Sports
    ARMSTRONG 6 INCH DECK PLATE
    Armstrong
    DRAIN PLUG W/WASHER H20/H1-9
    Hobie
    WAVE SPREADER TANG
    Hobie
    Out of Stock
    Gudgeon Sunfish
    Laser Performance
    Hobie Drain plug Screw
    Hobie
    SCREW THMS 1/4-20 X 1-5/8"
    Hobie
    FAIRLEAD THRU-DECK H18
    Hobie
    PHMS 1/4-20 X 1" (SS) SLOT HD
    Misc
    Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs
    RUDDER PINS H-14/16 PR (NYLON)
    Murrays Sports
    P-18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET 40x62" Peel and stick diamond cut EVA foam sheet for rail and deck grip on all Hobie, Nacra, Prindle catamarans, Surfboards, Paddleboards, Dingy, Keel boat traction. Easy to install traction pads for Hobie rails and hulls. EVA foam does not absorb water, adds some padding as well. Sheets can be cut into strips for anywhere traction or padding is wanted or it can be used to cover the hull for padding grip and UV protection. Great for older boats as well
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET
    Murrays Sports
    Cat Paws Hull Pads Murrays PN 13-0031 Cat Paws Hull Pads are foam pads that will protect your catamaran hulls. Similar to hull chocks, but much more versatile. Cat Paws can be used as a mast cradle while trailering, and are perfect for turning your cat on its side in parking lots.  Made from a highly durable closed cell foam that does not absorb water, mold or corrode. Ideal for use on Hobie, Nacra, and Prindle catamarans. Closed cell foam body with a bungee strap for holding it in
    Hobie hull chocks, Nacra hull pads
    Cat Paws (4x4x36") pr
    Murrays Sports
    Hobie 16 Hull Pads by Forward
    Forward WIP
    Centerboard Spring Kit Prindle Factory centerboard spring kit for Prindle 18.2 and 19 includes 4 springs. Performance Sports factory item #1027.
    CENTERBOARD SPRING KIT
    Murrays Sports
    New-Style 1003 Doubler Plate Murrays Part# 56-1013 New-style doubler plate for Inter #56-1003 Performance Sports factory item #1013
    NEW STYLE 1003 DOUBLER PLATE
    Misc
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WHITE NYLON #8 WASHER
    Misc
    PORT FASTENER KIT
    Murrays Sports
    H-18 Surefoot EVA Deck Grip Kit - Peel and Stick The Hobie 18 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn't absorb water the way carpet does, so there is minimal weight when it gets wet and it dries quickly! Hobie 18 kit includes four 3" x 40" strips and four 3" x 20" strips - covers the side rails
    SUREFOOT EVA KIT H-18
    Murrays Sports
    O’Pen Skiff Boat Cover
    O’Pen Skiff Boat Cover
    MURRAYS OPEN SKIFF BOAT OCVER
    Murrays Sports
    PRINDLE SHROUD ANCHOR PIN 15/16/18 Updated
    Murrays Sports
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    FHSMS #8 X 1 (SS)
    MISC
    O'Pen Skiff Front Towing Handle
    Tahe Outdoors
    BOLT RR BEAM 3/8-16X4.5 Soc Head
    MISC
    BOLT FOR GUDGEON 1/4-20X1.25"
    MISC
    Out of Stock
    Coaming Sunfish
    Laser Performance