Ronstan

119 products

119 products

Sort

Ronstan Series 20 Utility Block, Tube Rivet

Murrays Part# 21-0661

Rontan's cheek block is a Hobie® 18 and Prindle downhaul and turning block. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.

RONSTAN MIDGET SINGLE BLOCK (CHEEK)

Ronstan Sticky Fingerless Race Glove CL730 provide hand protection, a secure grip, and reduce fatigue by minimizing the physical effort required to hold rope.
Features:
Amara synthetic leather for maximum durability, minimum stretch and shrinkage.
Double Aramid stitching in high wear areas.
Double thickness palm and fingers for protection and grip.
UPF 50 (Ultra-Violet Protection Factor).
Mesh panels for flexibility, comfort and quick drying.
Low-cut neoprene

RONSTAN STICKY FINGERLESS RACE GLOVES

Ronstan Stainless Steel D Shackle, 5/32" Pin, Slotted Head

Murrays Part# 21-0615

Ronstan stainless D shackle has 5/32" slot head pin.

Features:

High strength to weight ratio

Premium quality, rated

Grade 316 stainless steel bodies and pins

RONSTAN STAINLESS STEEL D SHACKLE, 5/32" PIN, SLOTTED HEAD

Ronstan Eye & Eye Swivel

Murrays Part# 21-0078

This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.

RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)

Ronstan Sticky 3-Finger Gloves

The Ronstan Sticky 3-Finger Gloves provide extra warmth and protection over half-finger gloves. Ronstan Sticky Race Gloves provide hand protection, a secure grip, and reduce fatigue by minimizing the physical effort required to hold rope. While keeping the thumb and pointer finger free for dexterity

RONSTAN STICKY 3-FINGER GLOVES

Ronstan Multi-Purpose Tool

Murrays Part# 21-1320

The Ronstan Multi-Purpose Tool is a screwdriver with two shackle sockets and wrench for #8, 10 and 1/4" nuts as well as metric nuts. The 3/4"- thick plastic body provides better grip than flat stainless tools. Suits both coined and slotted shackle pins, and small nylon-insert nuts

RONSTAN MULTI-PURPOSE TOOL

Ronstan Swiveling Fork Snap Shackle 72mm

Murrays Part# 21-6130

Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio.

RONSTAN SWIVELING FORK SNAP SHACKLE 72MM

Ronstan Fairlead V-Cleat for
3-6mm Line

Murrays Part# 21-5101

Ronstan's carbon-composite V-cleats are strong, lightweight and inexpensive, and are a simple solution to cleating lines under moderate loads. This cleat is great for control lines on catamarans and dinghies. A cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Use with rope diameters of 1/8"-1/4". Measurement between hole centers is 1-7/8" and the cleat weighs only 0.4 oz.

ROSTAN FAIRLEAD V-CLEAT FOR 3-6MM LINE

Ronstan Rope Guide for Small Cam Cleats

Murrays Part# 21-5404

A comprehensive range of specialist cleat accessories allow customization of the cleat setup to optimize performance by controlling inward lead, outward lead, cleating and nucleating angle and height.

RONSTAN ROPE GUIDE FOR SMALL CAM CLEATS

RONSTAN WAVE MAINSHEET BASE BLOCK

RONSTAN SMALL "C-CLEAT' CAM, GREY

Ronstan 5/32" Bow Shackle

Murrays Part# 21-0633

Bow shackle with 5/32" pin diameter.

Ronstan Part# RF633

5/32" BOW SHACKLE

Series 19 C-Track
Track Fastener: 4mm (5/32”) countersunk fasteners at 75mm (3") centers
Stop Holes: 19mm (3/4") centers
Installation: Requires 19-5024 countersunk rivets
Applications
Dinghy and small catamaran jib sheet leads
Adjustable hiking strap systems
Dinghy outhauls
Ronstan Part# RC9190

RONSTAN SERIES 19 C-TRACK

Ronstan RopeGlide Ring Black Alloy

Simplicity and clever design are the keys to a good product and the Ronstan RopeGlide™ Rings feature a deep groove to allow a strong lashing to be made.
Although compact and lightweight, these rings are high performers. Rated for maximum working loads from 500 to 7000kgs (1100 to 15,000lbs), there is a model for everything from a small sailing dinghy to a maxi yacht.

Ronstan Part# RF8090-

RONSTAN ROPE GLIDE RING

Ronstan Figure 8 Trapeze Ring

Murrays Part# 25-3610

Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.

RONSTAN FIGURE 8 TRAPEZE RING (EACH)

Series 15 BB Block, Single Loop Top

Murrays Part# 21-15101

The Series 15 BB Block, Single Loop Top is the smallest and lightest ball bearing block available. With a precision molded acetal sheave running on stainless steel ball bearings that provide high performance low friction. It has a single loop head blocks include an O-ring to separate running line from head lashing or fixing.

Applications:
Dinghy control lines
Vangs, cunninghams and tweakers
Shock cord tensioning systems

RONSTAN SERIES 15BB BLOCK, SINGLE LOOP TOP

Base Pad: Flat 3-Hole

Murrays Part# 25-3001

Use to mount a swivel cam to any flat surface. This adapter is not necessary when using Hobie's Offset Base Pad #07-1162.

BASE PAD: FLAT 3-HOLE

Ronstan Fairlead for Small Cam Cleats, Front Mount

Murrays Part# 21-5005

The small Fast Track fairlead is easily fitted to Ronstan's small C-Cleat (#21-5000) to allow precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing.

Ronstan Part# RF5005

RONSTAN FAIRLEAD FOR SMALL CAM CLEATS, FRONT MOUNT

Ronstan Series 20 Ball Bearing Block with Series 20 block linked at 90 Degrees

Murrays Part# 21-2028

As used on the Murrays No-Cut Hi-Low Trapeze Adjustment Kit. Precision molded Acetal sheaves run on stainless steel or Torlon® ball bearings to provide high performance and low friction.

The Ronstan back-to-back blocks have 3/4" sheaves and 1/4" maximum line diameter. Maximum working load is 550 lbs.; breaking load is 1210 lb. Weighs only 1.1 oz.

Ronstan part #RF20284.

RONSTAN SERIES 20 BALL BEARING BLOCKS LINKED AT 90 DEGREES

For kiteboarding, upgrade bow and flat kite bridle pulleys with Ronstan's micro pulleys to extend the life of your bridles and increase the working strength. 550 lb. working load.

RONSTAN SERIES 20 BALL BEARING SINGLE BLOCK WITH LOOP TOP

Ronstan Ferrule Eye 8mm Clearance

Murrays Part# 21-0499

Ronstan's grade 316 grade stainless steel eyestrap has a ferrule that guides line and provides a nice lead from any angle. Weighs 0.1 oz.

Measurements:

A = 3/8" ferrule eye diameter
B = 3/16" width
C = 1-1/8" distance between holes center-to-center
D = 5/32" hole diameter

Ronstan Part# RF499

RONSTAN EYESTRAP WITH FERRULE EYE

Ronstan Series 30 Utility Block, Fiddle

Murrays Part# 21-0186

Use this Ronstan small fiddle block for 4:1 system for boom vangs or righting aids.

This is used for H16 Aussie Halyard Systems too

Fiddle block with tube rivets

RONSTAN SMALL FIDDLE BLOCK

Ronstan Fairlead Forged "Loop"
1-7/16

Murrays Part# 21-0134

Grade 316 stainless steel replacement loop for #21-0371 Track Slide.

Specifications:

A = 9/16"
B = 3/16"
C = 1-7/16"
D = 3/16"
Weight 0.2 oz.

Hobie Part# 60330040

RONSTAN FAIRLEAD FORGED "LOOP" 1-7/16

Ronstan Furler Drum 2.5 Fork/Fork

RONSTAN SWIVEL 360 WITH SMALL C-CLEAT

Ronstan Toggle Pin with Lanyard
1/4 X 3/4"

Murrays Part# 21-1153L

Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.

RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4"

Safety Pin Stainless Steel

Murrays Part# 21-0126

The stainless steel safety pin is an alternative to the split ring, spring clip or cotter pin. Hobie Cat® Part# 20503

SAFETY PIN STAINLESS STEEL

Ronstan Breathable Smock

RONSTAN BREATHABLE SMOCK

Ronstan S19 C-Track Composite
Slide, Loop Top, Plunger Stop

Murrays Part# 21-91940

Suitable for dinghy and small catamaran jib sheet leads and dinghy outhauls.

Features:
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing positions
Applications:
Dinghy and small catamaran jib sheet leads
Dinghy outhauls

RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP, PLUNGER STOP

The Sheaveless Ronstan Shock Block 10mm
The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.

RONSTAN 10MM SHOCK BLOCK 3/8"-RED

Ronstan Series 15 BB Block - Single Swivel Head

Murrays Part# 21-15100

The Series 15 BB Block - Single Swivel Head is the smallest and lightest ball bearing block available. It features a precision molded acetal sheave running on stainless steel ball bearings which provide high performance and low friction. Single loop head blocks include an O-ring to separate running line from head lashing or fixing.

RONSTAN SERIES 15BB BLOCK-SINGLE SWIVEL HEAD

Ronstan Wave Mainsheet Upper Block

Murrays Part# 21-41500

The Hobie Wave Mainsheet Upper Block is a Ronstan Series 40 fiddle block with 40mm sheaves. Series 40 All Purpose Block, Fiddle All purpose fiddle block with universal head

RONSTAN WAVE MAINSHEET UPPER BLOCK

RONSTAN OPEN V-CLEAT FOR 3-6MM LINE

Ronstan Fairlead for Medium Cam Cleats

Murrays Part# 21-5015

Ronstan's front-mounted fairlead is easily fitted to the T-Cleat and C-Cleat. It allows precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing. Constructed of tough, abrasion resistant composite material. Weight: .5 oz.

RONSTAN FAIRLEAD FOR MEDIUM CAM CLEATS

Ronstan S-Hook, 8mm (5/16")

Murrays Part# 21-0049

The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release.

316 Stainless Steel, 8mm diameter bar

Ronstan Part# RF49

RONSTAN S HOOK, 8MM (5/16")

2182 Ronstan 3/16 Sailmakers Thimble is a great option for DIY dyneema rigging projects. The closed thimble prevents chaffing on your dyneema.

3/16 Sailmakers Thimble

S19 Alloy C-Track End Cap Pair Only
Murrays Part# 21-91980
The S19 Alloy C-Track End Cap
Features
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing position

RONSTAN SERIES 19 C-TRACK END CAP (2)

Ronstan Series 40 Ball Bearing Block, Double with Becket

Murrays Part# 21-40210

This block is used as a replacement for the upper mainsheet block on a Hobie Getaway. Double sheave block with becket and swivel shackle head (non-locking)

RONSTAN SERIES 40 BALL BEARING BLOCK, DOUBLE WITH BECKET

Ronstan Toggle Pin 1/4 X 1

Murrays Part # 21-1157

Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1157L

Features:
-Toggle pins are a secure and vibration proof

-Machined from 316 grade stainless steel

-Volume pricing available upon request

RONSTAN TOGGLE PIN 1/4 X 1"

Ronstan Red Trapeze Handles -Rope Style

Murrays Part# 21-5122R

Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.

Ronstan Trapeze Handles -Rope Style
Murrays Part# 21-5122R
Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs

RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)

Previous 1 2 3 Next

Recently viewed

Ronstan