NACRA N5.8 All Parts

40 products

    40 products
    Out of Stock
    Harken 57mm Carbo 8:1 System Murrays Part# 28-81 Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
    HARKEN 57mm CARBO 8:1 SYSTEM
    Harken
    Harken 57mm Carbo Ratchamatic 7:1 Low-Profile Mainsheet System Murrays Part# 28-71 The Harken 7:1 Mainsheet System includes a 57mm Triple Carbo Ratchamatic Base with 40mm Carbo single (Harken #HSB360) added on to it and a 57mm Triple with becket boom block (Harken #2605) By adding the 40mm Carbo single to the base block we have turned this into a low profile 7:1 Mainsheet system. line is not included. Safe working load is 1500 pounds; breaking strength is 3750 pounds.
    HARKEN 57MM CARBO RATCHAMATIC 7:1 LOW-PROFILE MAINSHEET SYSTEM
    Harken
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    TRAMP N5.8 BK 1-PC BIAS
    Murrays Sports
    Out of Stock
    MAST STEP SYSTEM: NACRA
    Murrays Sports
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Out of Stock
    Bridle Foil Rod with Screw Adjuster N5.8, 6.0 Murrays Part# 56-9669
    BRIDLE FOIL ROD w/SCREW ADJUSTR
    NACRA
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    POWER RIGHTING SYS W/OUT POLE
    Murrays Sports
    N-5.8 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    NACRA 5.8 trapeze wires part number 9522
    N-5.8 DOUBLE TRAPEZE (4)
    Murrays Sports
    MAST BASE CASTING NACRA
    NACRA Austrailia
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    SPARE PARTS KIT: NACRA
    Murrays Sports
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    MAST HEAD CASTING NEW NACRA
    NACRA Austrailia
    HULL CRADLE: H-20&N-5.8/6.0
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA DECK GRIP KIT
    Murrays Sports
    N5.8 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4505-12 Single black shroud for Nacra 5.8 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.8 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    OLD STYLE Dolphin Striker ROD NACRA
    NACRA
    N-5.8 JIB HALYARD W/SHACKLE
    Murrays Sports
    N-5.8 BRIDLE 5/32 BK
    Murrays Sports
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Out of Stock
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    PINS & RINGS KIT:H-17/20/NACRA
    Murrays Sports
    Beam Strap Rear N5.2, N5.5, N5.8 Murrays Part# 56-3509 Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094.
    BEAM STRAP REAR N5.2/5.5/5.8
    NACRA
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE
    Murrays Sports
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    YOKE ASSEMBLY W/ SPACERS
    Murrays Sports
    ELONGATED TRAPEZE RING  Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    TRAP SHOCK CORD: NAC/PRIN/SOL/GET
    Murrays Sports
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    SAIL POCKET PROTECTOR KIT MAIN
    Murrays Sports
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    MAST HINGE PIN NACRA/H17/20
    Misc
    Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.
    RONSTAN SHEAVE: P16, NACRA MAST HEAD
    Ronstan
    Ronstan Mast HD Base Sheave Nacra, Prindle18/19 Prindle Mast Head Sheave, Nacra Base Murrays Part# 56-6804 Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
    RONSTAN MAST HD BASE SHEAVE NACRA, PRINDLE 18/19
    Ronstan
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG W/GASKET
    Misc
    DOLPHIN STRIKER ROD NUT NACRA
    MISC
    BOLT HEX HD 5/16-18 X 1.5"
    Misc
    Daggerboard Carpet  Murrays Part# 56-1082 ​Approximately 1-1/2″ wide carpet installs in daggerboard wells.  Nacra factory item #1083. Sold by the foot.
    DAGGERBOARD CARPET PER FOOT
    Murrays Sports
    Murrays PN 001-0053 The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
    SPACER: RUDDER STIFFENING
    Murrays Sports
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports