NACRA 5.8 All Parts

80 products

    80 products
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    Ronstan Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs
    RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
    STAYMASTER TURNBUCKLE 3/32
    Staymaster
    Out of Stock
    1/4" QUICK RELEASE BOW SHACKLE
    Murrays Sports
    1/4" FAST SHACKLE
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    NACRA/PRINDLE AND H21 SS RUDDER PIN
    Murrays Sports
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Front Beam Strap Murrays Part# 56-2509 The Nacra Front Beam Strap is Nacra Sailing factory front beam strap #30068 fits the Nacra 5.2, 5.5, 5.5, 6.0 and 18SQ.
    NACRA FRONT BEAM STRAP
    NACRA
    Out of Stock
    Beam Strap Rear N5.2, N5.5, N5.8 Murrays Part# 56-3509 Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094.
    NACRA REAR BEAM STRAP
    NACRA
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006
    NACRA WIDE GUDGEON
    NACRA
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    Tller connection kit - yoke assembly - Hobie, Nacra, Prindle
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    Spreader Tip Plate Murrays Part# 56-9842 Spreader tip plate for all Nacras and Prindle 18, 18.2 and 19. Nacra Sailing factory item# 30316
    NACRA SPREADER TIP PLATE
    NACRA
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    MAIN SAIL POCKET PROTECTOR KIT
    Murrays Sports
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    NACRA MAST HINGE PIN
    NACRA
    Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.
    RONSTAN SHEAVE: P16 AND NACRA MAST HEAD
    Ronstan
    Jib Track End Stop Murrays Part# 56-1911 1 Jib track end stop. Fits Nacra 5.5SL, 5.7, 5.8, 6.0, as well as Prindle 18-2 and 19.
    PRINDLE/NACRA JIB TRACK END STOP
    NACRA
    Prindle 18/19 Ronstan Mast Head Base Sheave Murrays Part# 56-6804 Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
    PRINDLE 18/19 RONSTAN MAST HEAD SHEAVE
    Ronstan
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    HOBIE DRAIN PLUG WITH GASKET
    Misc
    Dolphin Sticker Rod Nut Murrays Part# 56-F151 9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling. Performance Sports factory item #F151.
    NACRA DOLPHIN STRIKER ROD NUT
    NACRA
    Nacra Hammock Hook Murrays Part# 56-1034 Hammock hook (sideloader) for Nacra 5.2, 5.5, 5.8, 6.0 and 18SQ Nacra Sailing factory item# 30013
    NACRA HAMMOCK HOOK
    NACRA
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    RUDDER PIN SPRING CLIP: 3/8
    Misc
    Nacra Illustrated Old Parts List Murrays Part# 56-0300 Performance Sports factory parts list for "older" Nacras, including Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5Uni, 18SQ.
    NACRA ILLUSTRATED OLD PARTS LIST
    Murrays Sports
    Daggerboard Carpet Murrays Part# 56-1082 ​Approximately 1-1/2″ wide carpet installs in daggerboard wells. Nacra factory item #1083. Sold by the foot.
    DAGGERBOARD CARPET
    Murrays Sports
    3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    3/16 - 1/4" SPLIT RING WITH PIGTAIL
    Misc
    Murrays PN 001-0053 The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
    RUDDER STIFFENING SPACER
    Murrays Sports
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc
    Recently viewed