NACRA 5.2 Upgrades

106 products

    106 products
    Spreader Bar Aft Murrays Part# 56-9843 Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components. Nacra Sailing factory item# 30335
    NACRA SPEADER BAR AFT
    NACRA
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    Out of Stock
    Spreader Bar Forward Fine Threaded Murrays Part# 56-9844 Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components. Nacra Sailing factory item# 30336
    NACRA FORWARD SPREADER BAR (FINE THREADS)
    NACRA
    Hobie 3062 1/4" Bow shackle with quick release pin
    QUICK RELEASE 1/4" BOW SHACKLE
    Murrays Sports
    Main Halyard Hook Murrays Part# 56-6812 Main halyard lock (hook) or all Prindles and older Nacras. Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle, Hobie trapeze handle, Nacra, prindle, g-Cat, Sol Cat, Dart catamaran
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    Ronstan Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs
    RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    1/4" QUICK RELEASE BOW SHACKLE
    Murrays Sports
    This 1.5" mast ball is for all post-1983 Nacra catamarans. Ball measures 1-1/2" diameter with a 9/16" hole. Fits on the 56-2507 Nacra mast support rod. There is also a 1-1/4" ball for the pre-1983 Nacra sailboats. Nacra Sailing Factory item# 2504, 30338 and 30062
    Nacra Mast Ball 1.5" (Nylon) Murrays Part# 56-2504 This larger mast ball for post-1983 Nacras. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. Fits on the 56-2507 Nacra mast support rod. There is also a 1-1/4" ball for the older Nacras. Nacra Sailing Factory item# 30338 and 30062
    NACRA MAST BALL 1.5"
    NACRA
    1/4" FAST SHACKLE
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    NACRA/PRINDLE AND H21 SS RUDDER PIN
    Murrays Sports
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    End Cap With Hole Murrays Part# 56-2503 Nacra crossbar end cap. Used on all Nacras with round crossbars. Pictured with hole. Nacra front crossbar end cap with hole part #2503, rear crossbar end cap without hole part #3503  Compatible with Nacra 4.5, 450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, and 18SQ
    NACRA END CAP WITH HOLE
    NACRA
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Harken 22mm Block-Swivel Murrays Part# 28-0292 Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.
    HARKEN 22MM BLOCK-SWIVEL
    Harken
    Spreader Bar Screw (Fine Threads) Murrays Part# 56-9851 Black, fine-threaded screw (20/inch) fits newer Nacra cats, but may require fine-threaded forward spreader bar (#56-9844) and aft spreader bar (#56-9843) to ensure compatibility with older Nacras and Prindle 18, 18.2 and 19. Nacra Sailing factory item# 30337
    NACRA SPREADER BAR SCREW (FINE THREADS)
    NACRA
    Front Boom End Cap Murrays Part# 56-7902 Front boom end cap for Nacra and Prindle cats. Nacra Sailing factory item# 30204
    NACRA/PRINDLE FRONT BOOM END CAP
    NACRA
    Rear Boom End Cap Murrays Part# 56-7903 Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30205
    NACRA/PRINDLE REAR BOOM END CAP
    NACRA
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    GOOSENECK 'U' BRACKET Murrays Part# 56-7810 Prindle Gooseneck 'U' Bracket Gooseneck "U" bracket fits Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30980
    PRINDLE/NACRA GOOSENECK 'U' BRACKET
    NACRA
    Boom Outhaul Car Murrays Part# 56-7907 Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters. Nacra Sailing factory item# 30206
    PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
    NACRA
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    Gooseneck Box Fitting Murrays Part# 56-7808 Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles. Nacra Sailing Factory item# 30203
    NACRA-PRINDLE GOOSENECK BOX FITTING
    NACRA
    Harken 29mm Bullet Block Murrays Part# 28-0082 Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM BULLET BLOCK
    Harken
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Out of Stock
    NACRA Masthead Sheave 460/ 5.0/ 5.2/ 5.7 - 30160 Replacement mast head sheave for a Nacra 460, 5.0, 5.2 and 5.7. Nacra part number 30160
    NACRA MASTHEAD SHEAVE
    NACRA
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Harken 22mm Cheek Block Murrays Part# 28-0233 Harken micro cheek is used as a downhaul and turning block and as the Hobie 16 jib traveler control line block on the front crossbar. Specifications: 200 lb. SWL 1200 lb. breaking strength 1/4" maximum line diameter 7/8" sheave diameter 2-1/2" long
    HARKEN 22MM CHEEK BLOCK
    Harken
    Front Beam Strap Murrays Part# 56-2509 The Nacra Front Beam Strap is Nacra Sailing factory front beam strap #30068 fits the Nacra 5.2, 5.5, 5.5, 6.0 and 18SQ.
    NACRA 5.2, 5.5, 18SQ FRONT BEAM STRAP
    NACRA
    Out of Stock
    Beam Strap Rear N5.2, N5.5, N5.8 Murrays Part# 56-3509 Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094.
    NACRA REAR BEAM STRAP
    NACRA
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006
    NACRA WIDE GUDGEON
    NACRA
    Harken 38mm Big Bullet Sheave Murrays Part# 56-6503 The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.
    HARKEN 38MM BIG BULLET SHEAVE
    NACRA
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Recently viewed