NACRA 5.2 Parts ALL

106 products

    Parts for the Nacra 5.2

    106 products
    Out of Stock
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Front Boom End Cap Murrays Part# 56-7902 Front boom end cap for Nacra and Prindle cats. Nacra Sailing factory item# 30204
    NACRA/PRINDLE FRONT BOOM END CAP
    NACRA
    NACRA 5.2 1-PIECE 74" WIDE TRAMPOLINE-BLACK
    Murrays Sports
    Gooseneck Box Fitting Murrays Part# 56-7808 Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles. Nacra Sailing Factory item# 30203
    NACRA-PRINDLE GOOSENECK BOX FITTING
    NACRA
    Main Halyard Hook Murrays Part# 56-6812 Main halyard lock (hook) or all Prindles and older Nacras. Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    Out of Stock
    Small Mast Tang Murrays Part# 56-6607 Stainless steel mast tang with four mounting holes is used for jib halyard or mounting spinnakers on Nacra cats. Use four #19-5031 rivets and #19-5020 casings for installation. Nacra part# 6607
    NACRA SMALL MAST TANG
    NACRA
    NACRA DOLPHIN MAST SUPPORT ROD
    Murrays Sports
    N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006
    NACRA WIDE GUDGEON
    NACRA
    Rudder Cheek Casting Murrays Part# 56-4501 This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting. Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ). Nacra Sailing factory item# 30107
    NACRA RUDDER CHEEK CASTING
    NACRA
    Out of Stock
    NACRA Dolphin Striker Rod - Old Style This 13" stainless steel mast support rod with 1/2" diameter has 13 threads per inch (TPI). For older Nacras with round crossbars built before 1983. Does not include nuts or washers. Performance Sports factory item #C602. Before assembly, use grease or anti-seize on threads to prevent thread galling. Limited to stock on hand.
    NACRA DOLPHIN STRIKER ROB-OLD STYLE
    NACRA
    N-5.2 JIB HALYARD WITH SHACKLE
    Murrays Sports
    Sale
    N5.2 Diamond Wire with Turnbuckle Murrays Part# 002-4294-20 Diamond wire with turnbuckle for Nacra 5.2 is constructed to factory specifications.
    N-5.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Save $25
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    NACRA - PRINDLE GOOSNECK BASE FITTING
    NACRA
    Harken 22mm Block-Swivel Murrays Part# 28-0292 Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.
    HARKEN 22MM BLOCK-SWIVEL
    Harken
    Harken 57mm Quad Block-Swivel Murrays Part# 28-2631 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system.
    HARKEN 57MM QUAD BLOCK-SWIVEL
    Harken
    Spreader Bar Aft Murrays Part# 56-9843 Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components. Nacra Sailing factory item# 30335
    NACRA SPEADER BAR AFT
    NACRA
    Spreader Tip Plate Murrays Part# 56-9842 Spreader tip plate for all Nacras and Prindle 18, 18.2 and 19. Nacra Sailing factory item# 30316
    NACRA SPREADER TIP PLATE
    NACRA
    Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02
    Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02
    N-5.2 TRAPEZE WIRES (2)
    Murrays Sports
    Gooseneck Bolt Murrays Part# 56-F131 3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles. Performance Sports factory item # F131
    PRINDLE/NACRA GOOSENECK BOLT
    NACRA
    GOOSENECK 'U' BRACKET Murrays Part# 56-7810 Prindle Gooseneck 'U' Bracket Gooseneck "U" bracket fits Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30980
    PRINDLE/NACRA GOOSENECK 'U' BRACKET
    NACRA
    Boom Outhaul Car Murrays Part# 56-7907 Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters. Nacra Sailing factory item# 30206
    PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
    NACRA
    Nacra Mast Head Casting Murrays Part# 56-6602 Nacra mast head casting is for Nacra Models 5.0/5.2/5.5/5.7/5.8/6.0/18SQ Nacra Sailing factory item# 30176
    NACRA MAST HEAD CASTING
    NACRA Austrailia
    Out of Stock
    N-5.2 TRAPEZE WIRES (2 HANDLES)
    Murrays Sports
    Out of Stock
    NACRA Masthead Sheave 460/ 5.0/ 5.2/ 5.7 - 30160 Replacement mast head sheave for a Nacra 460, 5.0, 5.2 and 5.7. Nacra part number 30160
    NACRA MASTHEAD SHEAVE
    NACRA
    NACRA 5.2 1PC BIAS CUT 72" WIDE HULL TRAMPOLINE-BLACK
    Murrays Sports
    N5.2 Dimond Wire with Turnbuckle and Straight Spreader Bar (First Generation) Murrays Part# 002-4294-20-1
    N-5.2 DIAMOND WIRE WITH TURNBUCKLE AND STRAIGHT SPREADER BAR (FIRST GENERATION)
    Murrays Sports
    Recently viewed