NACRA 5.2 Parts ALL

109 products

Parts for the Nacra 5.2

109 products

Sort

1/4" QUICK RELEASE BOW SHACKLE

DACRON INSIGNIA CLOTH - BLACK

Quick Release Pin 1/4 X 1-1/4 with Lanyard

Murrays Part# 18-4M125L

QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD

Hobie 3062 1/4" Bow shackle with quick release pin

QUICK RELEASE 1/4" BOW SHACKLE

Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.

HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT

Rudder Pin Nacra, Prindle and H21 (Aluminum)

Murrays Part# 001-5272

Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included.

Sold in pairs

NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN

SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103

SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103

SMALL BLOCK WITH REMOVABLE SHEAVE

Deluxe Quick Release Pin 1/4 X 1 with Lanyard

Murrays Part# 18-4M100

This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.

Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie 8020410 and 8020411 clevis pin

DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 107"

Rear Mast Support with "V"

Murrays Part# 13-3002

REAR MAST SUPPORT WITH "V"

Oxen blocks are the ultimate high tech, self-holding jib blocks that offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use. Expensive, but the best is rarely cheap!

OXEN BLOCK WITH PIN - CLEATING BLOCK

Tiller Tie Bar Kit

Murrays Part# 56-5516

The Nacra Tiller Tie Bar Kit provides improved tiller connect for older Nacras.

Nacra Sailing factory item# 30149 and 30150

NACRA TILLER TIE BAR KIT

Nacra Illustrated Old Parts List

Murrays Part# 56-0300

Performance Sports factory parts list for "older" Nacras, including Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5Uni, 18SQ.

NACRA ILLUSTRATED OLD PARTS LIST

Spare Parts Kit: Nacra

Murrays Part# 001-8221

Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors.

Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not

NACRA SPARE PARTS KIT

N-5.2 MAIN HALYARD WITH SHACKLE

N5.2 Shroud 5/32" Roller Swaged

Murrays Part# 002-4205-12 

Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

Compare to Nacra product #9536

N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Mast Base Casting

Murrays Part# 56-6605

Factory replacement mast base casting for Nacras except those with a carbon mast.

Nacra Sailing item# 30177

NACRA MAST BASE CASTING

NACRA Austrailia

Harken Cleat Adapter with Hardware

Murrays Part# 007-50010

Hobie Factory Part 50010

CLEAT ADAPTER PLATE WITH HARDWARE

Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.

Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie Part# 8020410 and 8020411 clevis pin

QUICK RELEASE DELUXE PIN 1/4 X 1"

Rear Boom End Cap

Murrays Part# 56-7903

Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles.

Nacra Sailing factory item# 30205

NACRA/PRINDLE REAR BOOM END CAP

N5.2 Forestay 5/32" Black Wire

Murrays Part# 002-4245-12

Forestay for Nacra 5.2 is constructed to factory specifications with 5/32" black-coated wire.

N-5.2 FORESTAY 5/32" BLACK WIRE

Nacra mast step system-mast base-Nacra mast support rod-Nacra mast ball-Nacra mast Sopport Pad

NACRA MAST STEP SYSTEM

Front Beam Strap

Murrays Part# 56-2509

The Nacra Front Beam Strap is Nacra Sailing factory front beam strap #30068 fits the Nacra 5.2, 5.5, 5.5, 6.0 and 18SQ.

NACRA 5.2, 5.5, 18SQ FRONT BEAM STRAP

Beam Strap Rear N5.2, N5.5, N5.8
Murrays Part# 56-3509
Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094.

NACRA REAR BEAM STRAP

Rivet Washer Nylon
Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions.
Nacra PN 40200

RIVET WASHER NYLON

The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet!

Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.

UNIVERSAL SUREFOOT EVA KIT

Bolt Hex Head 5/16-18 X 1.5"

Murrays Part# 19-2229

Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting.

Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164

BOLT HEX HEAD 5/16-18 X 1.5"

Zip Tech Zipper Lubricant 0.5oz

Murrays Part# 38-1925

Zipper Lubricant for use on dry suits, and other tough zipper applications to ensure zippers operate properly and seal out the elements.

ZIPPER LUBRICANT

Rudder Kick-Up Stop

Murrays Part# 56-4518

The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ.

Performance Sports factory item# 4518

NACRA RUDDER KICK-UP STOP

Spreader Bar Screw (Fine Threads)

Murrays Part# 56-9851

Black, fine-threaded screw (20/inch) fits newer Nacra cats, but may require fine-threaded forward spreader bar (#56-9844) and aft spreader bar (#56-9843) to ensure compatibility with older Nacras and Prindle 18, 18.2 and 19.

Nacra Sailing factory item# 30337

NACRA SPREADER BAR SCREW (FINE THREADS)

Harken 38mm Big Bullet Sheave

Murrays Part# 56-6503

The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.

HARKEN 38MM BIG BULLET SHEAVE

Dolphin Sticker Rod Nut

Murrays Part# 56-F151

9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling.

Performance Sports factory item #F151.

NACRA DOLPHIN STRIKER ROD NUT

Nacra Pivmatic Assembly with Pin: Aluminum Cleat

Murrays Part# 56-0266-1

Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.

NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT

Dolphin Mast Support Pad

Murrays Part# 56-2505

Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod.

Nacra Sailing factory item# 30063.

PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD

Nacra 5.2 Trapeze Wires - NACRA Part Number 9540

N-5.2 DOUBLE TRAPEZE BK (4)

Power Righting System I

Murrays Part# 13-4101

POWER RIGHTING SYSTEM I

Front Boom End Cap

Murrays Part# 56-7902

Front boom end cap for Nacra and Prindle cats.

Nacra Sailing factory item# 30204

NACRA/PRINDLE FRONT BOOM END CAP

N-5.2 BRIDLE 5/32 BLACK WIRE

Gooseneck Box Fitting

Murrays Part# 56-7808

Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles.

Nacra Sailing Factory item# 30203

NACRA-PRINDLE GOOSENECK BOX FITTING

Main Halyard Hook

Murrays Part# 56-6812

Main halyard lock (hook) or all Prindles and older Nacras.

Nacra Sailing factory item# 30192

PRINDLE/NACRA MAIN HALYARD HOOK

Previous 1 2 3 Next

Recently viewed

NACRA 5.2 Parts ALL