NACRA Carbon 20 All Parts

74 products

    74 products
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle, Hobie trapeze handle, Nacra, prindle, g-Cat, Sol Cat, Dart catamaran
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    Hobie, Nacra, Prindle Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Applications:  Hobie 14, 16, 17, 18, 18SX Sold in pairs Compare to Hobie Cat® Part#
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    Sale
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    MURRAYS DELUXE SAIL AND BOOM BAG
    Murrays Sports
    Save $50
    This 1.5" mast ball is for all post-1983 Nacra catamarans. Ball measures 1-1/2" diameter with a 9/16" hole. Fits on the 56-2507 Nacra mast support rod. There is also a 1-1/4" ball for the pre-1983 Nacra sailboats. Nacra Sailing Factory item# 2504, 30338 and 30062
    Nacra Mast Ball 1.5" (Nylon) Murrays Part# 56-2504 This larger mast ball for post-1983 Nacras. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. Fits on the 56-2507 Nacra mast support rod. There is also a 1-1/4" ball for the older Nacras. Nacra Sailing Factory item# 30338 and 30062
    NACRA MAST BALL 1.5"
    NACRA
    Powerstick_carbon Hobie tiller extension
    Powerstick carbon tiller extension - Hobie, Nacra, Prindle, Dart, G-Cat, Sol Cat
    POWERSTICK TELESCOPING CARBON TILLER EXTENSION 62-115" - YOKE
    Murrays Sports
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16, wave
    ECONOMY BOAT COVER
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    Harken 22mm Cheek Block Murrays Part# 28-0233 Harken micro cheek is used as a downhaul and turning block and as the Hobie 16 jib traveler control line block on the front crossbar. Specifications: 200 lb. SWL 1200 lb. breaking strength 1/4" maximum line diameter 7/8" sheave diameter 2-1/2" long
    HARKEN 22MM CHEEK BLOCK
    Harken
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Nacra Main Halyard Ring with Shackle Murrays Part# 56-30312 This shackle connects your Mainsail on your mast, it's knotted on your main halyard. It takes your Mainsail through the slot of your mast to the top where it connects with the Mainsail hook.
    NACRA MAIN HALYARD RING WITH SHACKLE
    NACRA
    Out of Stock
    Nacra Tiller Tie Bar End Tendon Assembly Murrays Part# 56-31567-2 The rubber tiller tiebar connection including string. This part connects the tillerarm with the tiller crossbar.
    NACRA TILLER TIE BAR END TENDON ASSEMBLY
    NACRA
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    CAT TRAX WIDE HULL CRADLES
    Cat Trax
    Out of Stock
    Nacra Rear Beam Tramp Tie Buttons Murrays Part# 56-30883 The NACRA Rear Beam Tramp Tie Buttons are the black nubs that are riveted on to the rear beam to hook the tramp lacing around. These are used on many boats and are installed with a 3/16 1/2" rivet. These can likely also be used on a Hobie Getaway, Miracle 20 or others that are looking to use a smaller Dyneema line instead of the 3/16 or 5/32 line Nacra Part# 30883
    NACRA REAR BEAM TRAMPOLINE TIE BUTTONS
    NACRA
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    NACRA URETHANE TILLER TIE BAR ROD WITH STRING
    NACRA
    Nacra Footstrap Set With Bolts Murrays Part# 56-31175 This Nacra footstraps can adjust to the size of your foot. The set comes with 2 footstraps, including the necessary bolts and washer to put them on the boat.
    NACRA FOOTSTRAP SET WITH BOLTS
    NACRA
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Out of Stock
    NACRA BOOM PIN
    NACRA
    NACRA 15/F16/17/F20C BRIDLE CONNECTOR
    NACRA
    Harken 40mm Block - Swivel Murrays Part# 28-2636 Carbo AirBlocks® are 60% stronger and 30% lighter than Harken's classic blocks. Use the 40mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats.
    HARKEN 40MM BLOCK-SWIVEL
    Harken
    Harken 16mm Single Murrays Part# 28-0404 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.
    HARKEN 16MM SINGLE
    Harken
    Snuffer Pole Pin Bracket Murrays Part# 56-9626 Use this bracket to attach spinnaker pole (discontinued item #56-9622) to boat. Nacra Sailing factory item# 30293
    NACRA SNUFFER POLE PIN BRACKET
    NACRA
    Out of Stock
    NACRA RUDDER COVER
    NACRA
    Nacra Tapered 1:10 Mainsheet Murrays Part# 56-50022 This mainsheet 1:10 F20 (blue) has a Dcup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, Dyneema® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover. This all round line, is ready to splice of taper and excellent for sheets, halyards and control lines.
    NACRA TAPERED MAINSHEET 1:10
    NACRA
    Zip Tech Zipper Lubricant 0.5oz Murrays Part# 38-1925 Zipper Lubricant for use on dry suits, and other tough zipper applications to ensure zippers operate properly and seal out the elements.
    ZIPPER LUBRICANT
    Misc
    EASY RIGG TOOL GREEN
    Murrays Sports
    Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    Ronstan Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs
    RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    1/4" FAST SHACKLE
    Murrays Sports
    Replacement part for the adjustable trapeze system found on modern NACRA catamarans. Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS NACRA Part # 30938
    NACRA TRAPEZE STOP
    NACRA
    Nacra Boom Endcap Murrays Part# 56-31166 The boom endcap 40mm x 2mm, this is the round endcap used on all standard boom (non decksweeper).
    NACRA BOOM ENDCAP
    NACRA
    Out of Stock
    Spreader Bar Forward Fine Threaded Murrays Part# 56-9844 Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components. Nacra Sailing factory item# 30336
    NACRA FORWARD SPREADER BAR (FINE THREADS)
    NACRA
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    Out of Stock
    NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM
    NACRA
    Out of Stock
    Hobie Universal Hull Cradles Murrays Part# 007-1624 Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair. Dimensions of inside of cradle: Width: 14-1/2" Depth: 4" Width 1" from bottom: 10-1/4"
    HOBIE UNIVERSAL HULL CRADLES
    Hobie
    Harken 16mm Eyestrap Block Murrays Part# 28-0442 The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The 442 uses a spacer to keep the line in the sheave during intermittent loading.
    HARKEN 16MM EYESTRAP BLOCK
    Harken
    Recently viewed