NACRA Carbon 20 All Parts

74 products

74 products

Sort

Hobie Universal Hull Cradles

Murrays Part# 007-1624

Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair.

Dimensions of inside of cradle:
Width: 14-1/2"
Depth: 4"
Width 1" from bottom: 10-1/4"

HOBIE UNIVERSAL HULL CRADLES

Harken 16mm Eyestrap Block

Murrays Part# 28-0442

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The 442 uses a spacer to keep the line in the sheave during intermittent loading.

HARKEN 16MM EYESTRAP BLOCK

NACRA CONNECTIONPART TILLER/JOYSTICK FLEX

Nacra Rudder Casting Lower Eye Screw Wide

Murrays Part# 56-31706

Rudder casting lower eye screw wide

NACRA RUDDER CASTING LOWER EYE SCREW WIDE

Nacra Compression Pole Base

Murrays Part# 56-31236

The base on the bowsprit for the compression pole.

NACRA COMPRESSION POLE BASE

Nacra Spinnaker Tapered Halyard F20C

Murrays Part# 56-50014

Spihalyard tapered Nacra 20 (blue/white), , has a SSR basics, made by Alpha Ropes. Looking to the construction of the line, it's single braid, 16 strand (8x2), mix DyneemaÂ® Sk78 / CorduraÂ®. This line is not ready for kinking and is excellent for sheets. A advantage of this line, its soft while kept in your hands.

NACRA F20C SPINNAKER TAPERED HALYARD

Nacra Shroud Eye Washer

Murrays Part# 56-31394

Shroud eye washer compatible with Nacra 15, Nacra F16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon

NACRA SHROUD EYE WASHER

Harken 16mm Cheek Block

Murrays Part# 28-0416

Harken's 16mm check block is a downhaul and turning block and is perfect for small synthetic control lines. 1-13/16" long; 5/8" sheave diameter; 250 lb. SWL; 1200 lb. breaking strength. Use #8 (4mm) RH fasteners.

Harken Part# 416

HARKEN 16MM CHEEK BLOCK

Harken 29mm Wire Bullet Block-Swivel

Murrays Part# 28-0183

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.

HARKEN 29MM WIRE BULLET BLOCK-SWIVEL

Harken 16mm Block-Swivel

Murrays Part# 28-0417

The Harken air block offers a very high load in an extremely lightweight block. The block itself is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 750 lb. breaking strength; 5/32" shackle pin diameter.

Harken Part# 417

HARKEN 16MM BLOCK-SWIVEL

Harken 22mm Block-Swivel

Murrays Part# 28-0292

Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.

HARKEN 22MM BLOCK-SWIVEL

NACRA SPREADER BAR SCREW UNF

NACRA RUDDER BASE CASTING

NACRA F18 INFUSION/N20 OLD STYLE RUDDER BLADE

Rudder Eye Screw Wide With Bushing

Murrays Part# 56-32055

The screw which is fitted in your lower casting (Until MK2), this screw including the bushing can be adjusted for the rake of the rudder.

NACRA RUDDER EYE SCREW WIDE WITH BUSHING

Nacra Spring Pin 1/8 x 7/8

Murrays Part# 56-31389

Spring pin 1/8 x 7/8

NACRA SPRING PIN

NACRA RUDDER ROLLER UPPERCASTING

NACRA UPPER RUDDER CASTING INSERT

NACRA F20C COMPRESSION POLE (2014 & UP)

NACRA F20C MAST BASE COMPLETE

Nacra F20C Mast Base Rotatorplate

Murrays Part# 56-31209

Mast base rotatorplate for the Nacra F20 Carbon.

NACRA F20C MAST BASE ROTATORPLATE

NACRA F20C FULL BOAT COVER

Nacra F20C Aluminum Adjustable Tiller Crossbar

Murrays Part# 56-31152

The adjustable tiller tie bar, when delivered it comes including the rubber euro rods for connecting it with the rudders / tiller arms. In the center of the tiller crossbar, the connection part (U-bracket) will also be mounted (not the flex joint).

NACRA F20C ALUMINUM ADJUSTABLE TILLER CROSSBAR

NACRA MAST HOUND

Nacra Upper Countersunk Rudder Gudgeon

Murrays Part# 56-32077

The original upper rudder gudgeon with countersunk screw holes. A replacement part for your standard Nacra rudder gudgeons. Does not combine with the new lower rudder systems.

NACRA UPPER COUNTERSUNK RUDDER GUDGEON

N-20 CARBON BLACK COATED WIRE SHROUD

N-20 CARBON FORESTAY BARE WIRE

N-20C BRIDLE 5/32" BARE WIRE

NACRA 20 CARBON DIAMOND WIRE

Spreader Bar Aft

Murrays Part# 56-9843

Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components.

Nacra Sailing factory item# 30335

NACRA SPEADER BAR AFT

Spreader Tip Plate

Murrays Part# 56-9842

Spreader tip plate for all Nacras and Prindle 18, 18.2 and 19.

Nacra Sailing factory item# 30316

NACRA SPREADER TIP PLATE

Nacra F20C Aluminum Boom

Murrays Part# 56-31260

Nacra F20 Carbon aluminum boom for mainsail

Nacra Part# 31260

NACRA F20C ALUMINUM BOOM

Inter Bolt Front Beam 3/8-16X4.5"

Murrays Part# 56-F180

Socket head 3/8 x 4-1/2" front beam bolt for all Inters

Compatible Boats:  Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS.

Performance part# F180

NACRA BOLT FRONT BEAM 3/8-16X4.5"

Rear Crossbar Bolt 3/8-16X4.5 Hex Head

Murrays Part# 56-F181

Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS.

Performance Sports factory item# F181

NACRA REAR CROSSBAR BOLT 3/8-16X4.5"

Previous 1 2

Recently viewed

NACRA Carbon 20 All Parts