Murrays Marine, Murrays Sports, Murrays.com Since 1969, Family owned

Murrays Marine

764 products
    Murrays has been an innovator in beach catamaran sailing since the late 60s and is still making new parts today.  Murrays is the performance sailing source.
    764 products
    Out of Stock
    H14 Main Batten Set Murrays Part# 46-3011 Hobie factory saturn shaped fiberglass battens for a Hobie 14 main sail. They are cut to length and can be shortened as necessary for your sail. This is how Hobie makes their sets! Batten caps are included.
    H-14 MAIN BATTEN SET
    Murrays Sports
    DETACHABLE CHICKEN BONE
    Murrays Sports
    HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000
    H-18 CHANNEL RETAINING PLATE
    Murrays Sports
    Out of Stock
    Nacra Center Post Bridle Foil Murrays Part# 56-9663 Center post for Nacra bridle foil. Performance Sports factory #9663 Nacra Sailing #30303.
    NACRA CENTER POST BRIDLE FOIL
    Murrays Sports
    Murrays fiberglass hull repair kit for Hobie, Nacra and Prindle catamarans
    CAT KEELS KIT WEST SYS EPOXY
    Murrays Sports
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    H-18 PERFORMANCE MANUAL
    Murrays Sports
    BONEZ BOARD STACKERS (PAIR)
    Murrays Sports
    Beam Strap All N5.0 and 5.7 Murrays Part# 56-3510 Beam strap for front crossbars on all Nacra 5.0 and 5.7 models and rear crossbars on Nacra 5.0, 5.7 and 6.0. Nacra Sailing factory item #30095.
    NACRA FRONT BEAM STRAP
    Murrays Sports
    H20 Assembly Manual Murrays Part# 50-43450001 Printout of the Miracle 20 PDF. Includes tuning guide in the back.
    H-20 ASSEMBLY MANUAL
    Murrays Sports
    H18 Assembly Manual Murrays Part# 50-63450000 Printout of H18 assembly manual PDF.
    H-18 ASSEMBLY MANUAL
    Murrays Sports
    H17 Assembly Manual Murrays Part# 50-50450001 Printout of Hobie 17 assembly manual PDF.
    H-17 ASSEMBLY MANUAL
    Murrays Sports
    H17 Sport Assembly Manual Murrays Part# 50-52450011 Hobie® factory assembly manual for the Hobie 17 Sport. The manual is also available for free download at the Hobie Cat® Web site.
    H-17 SPORT ASSEMBLY MANUAL
    Murrays Sports
    H14 Assembly Manual Murrays Part# 50-13450000 Printout of the H14 assembly manual PDF.
    H-14 ASSEMBLY MANUAL
    Murrays Sports
    ARRIBA CORK BALL GRIP KIT Murrays Part# 44-0002 The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP. Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer
    Powerstick Cork Ball Grip Kit
    ARRIBA CORK BALL GRIP KIT
    Murrays Sports
    ANCHOR PLATE H18SX MAGNUM WINGS
    Murrays Sports
    Out of Stock
    SNUFFER BAG END POLE 11'
    Murrays Sports
    Yoke Stamping Only Stainless Steel Murrays Part# 001-0063 Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
    YOKE STAMPING ONLY (SS)
    Murrays Sports
    Trap Shock Cord H17 Murrays Part# 001-3520 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12' Sold Each
    H-17 TRAP SHOCK CORD
    Murrays Sports
    Wire 3/32" 7X19 Bare 316 Stainless Steel  316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards. Features 316 Stainless Steel Flexible and Low Stretch Highly Polished for Marine Use 7 groups of 19 strands Sold by the foot
    WIRE 3/32" 7X19 BARE 316 STAINLESS
    Murrays Sports
    Wire 1/16" 7X7 Bare 304 Stainless Steel Murrays Part# 002-0022 304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x7 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
    WIRE 1/16" 7X7 BARE 304 SS
    Murrays Sports
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    Windsurf Adjustable Outhaul Kit Murrays Part# 001-9520 Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed: Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind. Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind. Adjust the outhaul (sail shape) from either side, at any time.
    WINDSURF ADJUSTABLE OUTHAUL KIT
    Murrays Sports
    Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
    WAVE FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001.
    WAVE MAIN HALYARD
    Murrays Sports
    Wave Bridle 1/8" Black Murrays Part# 002-0814-02 One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
    WAVE BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    Out of Stock
    Upright Solo Righting System H14/16 Murrays Part# 007-1263 This system extends the shroud to make righting your cat by yourself easier. Special care is needed to ensure that the mast is secured, as it can come out of its socket when the product is used. Hobie Part# 1263
    H-14/16 UPRIGHT SOLO RIGHTING SYSTEM
    Murrays Sports
    Trap Wire Single Custom Murrays Part# 002-8253
    TRAP WIRE SINGLE CUSTOM
    Murrays Sports
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    Trapeze Spreader 8" with V-Hook Murrays Part# 001-0149 Medium-width stainless 8" windsurfing spreader with V-shaped hook for strength and safety. Weighs 7.5 oz. Limited to stock on hand.
    8" TRAPEZE SPREADER WITH V-HOOK
    Murrays Sports
    Trap Shock Cord Kit: H20 Murrays Part# 001-0131 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Our shock cord kit comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Kit includes two lengths of 1/4" shock
    H-20 TRAP SHOCK CORD KIT
    Murrays Sports
    Hobie trapeze shock cord 20730001 and 20730002
    H-14/16 TRAP SHOCK CORD
    Murrays Sports
    PRINDLE 18.2/19 MESH TRAMPOLINE-BLACK
    Murrays Sports
    The Murrays Trapeze handle features a contoured grip and a wire guide prevent hand contact with the wire. A recessed cavity in the base holds the nicropress oval and shields the sailor from sharp wire ends. Sold Individually. Hobie uses item #2011 for this handle. Used on Nacra, Prindle and Hobie catamarans.
    Nacra 5.7 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased se
    MURRAYS TRAPEZE HANDLE
    Murrays Sports
    Prindle 18 trampoline
    PRINDLE 18 MESH TRAMPOLINE-BLACK
    Murrays Sports
    PRINDLE 15 1PC MESH TRAMPOLINE-BLACK
    Murrays Sports
    P16 Mesh Trampoline-Black Murrays Part# 30-3122 Black mesh tramp for Prindle 16 includes cut-outs for ports. Hiking straps are installed and one pocket is included. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Order lacing line separately.
    PRINDLE 16 MESH TRAMPOLINE-BLACK
    Murrays Sports
    N5.8 1PC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    N6.0 IPC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    N5.7 1-PIECE BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    Recently viewed