In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Clevis Pin 1/4 x 1-3/4" Murrays Part# 22-9809 Stainless steel clevis pin measures 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole)
    CLEVIS PIN 1/4 X 1-3/4"
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin Murrays Part# 22-9804 Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Prindle Part# 6004 Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    Clevis Pin 1/4 X 1/2 Murrays Part# 22-9808 Stainless steel clevis pin. Measurement is 1/4" diameter x 1/2" grip length (shoulder to the split ring hole). Substitute for Hobie Cat® #8020371.
    CLEVIS PIN 1/4 X 1/2"
    Misc
    Clevis Pin 1/4 x 2-1/4" Murrays Part# 56-4587 1/4 x 2-1/4" clevis pin for all Inter rudder assemblies. Used to hold tiller crossbar assembly to tendon. Nacra sailing factory item# 30428
    CLEVIS PIN 1/4 x 2 1/4"
    NACRA
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    3/16 X 1-1/4" Clevis Pin Murrays Part# 22-9807 Stainless steel clevis pin. Measurement is 3/16" diameter x 1-1/4" grip length (shoulder to the split ring hole). Can replace Hobie Part# 8020340 Hobie Wave Mast Head Sheave Pin
    CLEVIS PIN 3/16 X 1-1/4
    Misc
    3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 x 1/2"
    Misc
    Clevis Pin 3/16 X 5/8" Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Hobie Cat Part number 8020041
    3/16 X 5/8"Clevis Pin Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 X 5/8"
    Misc
    3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061
    CLEVIS PIN 3/16 X 7/8"
    Misc
    Clevis Pin 5/16 x 2-3/16" Murrays Part# 56-4586 Uses: This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies. Mast step pin for Hobie 21SE 21SC  Nacra sailing factory item# 30427 Same as Hobie Part# 8020611
    CLEVIS PIN 5/16 x 2 3/16"
    NACRA
    Murrays Part# 001-7050 The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    Comptip Cap Plug Murrays Part# 50-8090900 This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in. Hobie Part# 8090900
    COMP-TIP CAP PLUG
    Hobie
    CORNER CASTING RIGHT FRONT-BLACK
    Hobie
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc
    Alpha Rope Cruiser 24 6mm Grey Murrays Part# 39-4606gy Cruiser 24 Kmix from Alpha Ropes is a great all around line for sheets and control lines. This 6 mm double braid line is light weight and offers great grip. It features strong HT polyester core with 24 plait polyester cover for great durability and grip.
    Cruiser 24 6mm Grey Murrays Part# 39-4606gy Double braid. 16 strand HT Polyester core, 24 braid HT Polyester cover. All around, great performance Ideal for sheets and control lines
    CRUISER 24 6MM GREY
    AlphaRope
    D Ring 2" ID x .25" Murrays Part# 25-3904 Stainless "D" ring measures 1/4" x 2" outside diameter.
    D RING SS 1/4 X 2"
    Misc
    D-Cup 78 KMIX 8mm Black/Grey Murrays Part# 39-4208bg Double braid. 12 strand, coated Dyneema® Sk78 core, 24 plait mix HT Polyester / Cordura® cover.
    D-CUP 78 KMIX 8MM
    AlphaRope
    Dacron 3oz Sail Tape-White Murrays Part# 010-3430 Quickly mend tears in Dacron sails, covers, rain gear and seats. The heavy-duty, 3-oz. Dacron sailcloth makes long-lasting emergency repairs or provides effective reinforcement for worn areas. Features quick marine adhesive backing; can be stitched for permanent repair. Our white Dacron sail repair tape is 3" x 15'.
    DACRON 3OZ MAINSAIL TAPE-WHITE
    Bainbridge
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Daggerboard Carpet Murrays Part# 56-1082 ​Approximately 1-1/2″ wide carpet installs in daggerboard wells. Nacra factory item #1083. Sold by the foot.
    DAGGERBOARD CARPET
    Murrays Sports
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET 40x62" Peel and stick diamond cut EVA foam sheet for rail and deck grip on all Hobie, Nacra, Prindle catamarans, Surfboards, Paddleboards, Dingy, Keel boat traction. Easy to install traction pads for Hobie rails and hulls. EVA foam does not absorb water, adds some padding as well. Sheets can be cut into strips for anywhere traction or padding is wanted or it can be used to cover the hull for padding grip and UV protection. Great for older boats as well
    DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET
    Misc
    The Dakine Half Finger Gloves are designed for watersports such as kayaking, kiteboarding, windsurfing and sailing. They combine ultimate performance with breathable nylon top skin, with a durable non slip palm construction. Unique pull tabs assist in removal of the gloves.
    DAKINE 1/2 FINGER GLOVES
    Dakine
    Sale
    The Dakine Push Button Kite Spreader Bar comes with an all metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style. · Kite specific easy hammer head spreader hook · Push button easy connect and disconnect · Strong stainless steel retention button · Freedom shape spreader bar pad
    DAKINE 10" PUSH BUTTON KITE SPREADER BAR
    Dakine
    Save $29
    Sale
    Dakine Push Button Wind Spreader Bar Murrays Part# 32-368505 Size: 10" Best fits M and L harnesses Color: Black The Dakine Push Button Windsurf Spreader Bar comes with a metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
    DAKINE 10" PUSH BUTTON WIND SPREADER BAR
    Dakine
    Save $29
    Sale
    The Dakine Push Button Kite Spreader Bar comes with an all metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
    DAKINE 12" PUSH BUTTON KITE SPREADER BAR
    Dakine
    Save $29
    Sale
    Dakine Push Button Windsurf Spreader Bar Murrays Part# 32-368499 Size: 12" Best Fits XL and XXL Harness Color: Black The Dakine Push Button Windsurf Spreader Bar comes with a metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
    DAKINE 12" PUSH BUTTON WIND SPREADER BAR
    Dakine
    Save $29
    Sale
    The Dakine Push Button Kite Spreader Bar comes with an all metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
    DAKINE 8" PUSH BUTTON KITE SPREADER BAR
    Dakine
    Save $29
    Sale
    DAKINE 8" PUSH BUTTON WIND SPREADER BAR
    Dakine
    Save $29
    Sale
    DAKINE 8" WINDSURF SPREADER BAR
    Murrays Sports
    Save $13
    Sale
    The Dakine C-2 waist harness is a high-performance kiteboard waist harness with a focus on customized comfort.
    DAKINE C-2 HARNESS-BLACK
    Dakine
    Save $131
    he comfortable, 6" adjustable foot straps feature 7mm neoprene padding to comfortably accommodate bare feet or sailing shoes. Their pre-formed arch eliminates collapsing and the exterior hook and loop closure system allows for quick and easy adjustment. Drilling instructions and self-tapping screws are included.
    DAKINE CATAMARAN FOOTSTRAP KIT (PR)
    Dakine
    Dakine Connect Kite Spreader Bar 10"
    DAKINE CONNECT KITE SPREADER BAR
    Dakine
    Sale
    Dakine Fly Wing Adjustable Line Murrays part# 32-348800 The Dakine Fly Wing Adjustable Line is an adjustable line for winging. With a non-corrosive adjustable buckle and non-slip boom pads, this product is simple yet effective. Attachment points open all the way up so they are easy to install on all wings. Easy to install on wings with frim handles, webbing handles and booms. Ideal on firm handles and booms because of the wide attachment point so it wont tear the handle grip. Features: Non-corrosive
    DAKINE FLY WING ADJUSTABLE LINE
    Dakine
    Save $16
    Sale
    DAKINE FLY WING HARNESS The Dakine Fly Wing Harness is the perfect accessory to keep you going longer. This ultra-lightweight, non-water absorbing harness provides maximum back support to keep your arms and back fresh in the smallest package possible. The Fly Wing includes the Dakine Hanger hook, which is foldable and movable to help prevent board dings and lets you lay flat on your belly on your board.
    DAKINE FLY WING HARNESS
    Dakine
    Save $84
    Sale
    DAKINE FLY WING WAIST/WRIST LEASH SET
    Dakine
    Save $39.05
    Recently viewed