In Stock

In Stock

2276 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2276 products
    Chinook Base Cup with Double Button Murrays Part# 003-0281 American standard heavy duty plastic base cup with 3/8" double push button has brass insert and cover which prevents sand from jamming parts.
    CHINOOK BASE CUP WITH DOUBLE BUTTON
    Chinook
    Chinook Mechanical Universal Joint Murrays Part# 001-9525 Chinook mechanical replacement universal joint for mast base has 8mm female threads on both ends.
    CHINOOK MECHANICAL UNIVERSAL JOINT
    Chinook
    Stainless steel cinch ring is also known as a hog ring. Use shock cord seizing pliers for a smooth installation; standard pliers can give a suitable cinch.
    CINCH RING 1/4" 6mm (X-0)
    Misc
    CINCH RING 3/8 10mm (X-2) EACH Stainless steal cinch ring for use on 3/8" shock cord or line. Sold Individually. Hobie part 53180010
    CINCH RING 3/8 10mm (X-2) EACH
    Misc
    CINCH RING 5/16 8mm
    Misc
    CINCH RINGS - Stainless Steel SOLD EACH
    MISC
    Clamcleat (Aluminum) Murrays Part# 27-0702 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing. This cleat is a substitution for Hobie Part# 61070000
    CLAMCLEAT (ALUMINUM)
    Clamcleat
    Clamcleat Auto-Release Racing Mini Murrays Part# 27-0257 The Clamcleat® Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade, yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely, but will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
    CLAMCLEAT AUTO-RELEASE RACING MINI CLEAT
    Clamcleat
    CLAMCLEAT BOOM CLEAT WITH CLEAT AND CLAM
    Clamcleat
    Clamcleat Handle For Trapeze Cleat Murrays Part# 27-0834 The 27-0834 handle is designed for a perfect fit on the Clamcleat® silver CL253 (#27-0253) and CL253AN hard-anodized (#27-0253A) trapeze cleats. Developed in conjunction with the racing specialists at Shock Sailing, the handle is light weight, the perfect size and very comfortable to use.
    CLAMCLEAT HANDLE FOR TRAPEZE CLEAT
    Clamcleat
    Clamcleat Kite Trapeze Hard Anodized Murrays part# 27-0253A This Clamcleat® aluminum rope cleat has a black hard-anodized coating that wears better than non-anodized when used with sandy line. Bottom roller. Rope size: 3/16" - 5/16" (4-8mm). Length: 3-1/2". Clamcleat version of a Ronstan RF5121
    CLAMCLEAT KITE & TRAPEZE HARD ANODIZED
    Clamcleat
    The ClamCleat Kiteboard depower cleat - CL826 is the most trusted cleat in the kiteboarding industry. ClamCleat has called it the Aero and Racer Back Cleat. The CL826 has been a stock item on many production kitebars since the inception of the sport, and is the most commonly used cleat on custom race bars. One of the great functions of this cleat is that it is easy to move up and down the sheeting line to adjust the bar throw and sheeting range.
    CLAMCLEAT KITEBAR DEPOWER CLEAT
    Clamcleat
    The ClamCleat Kiteboardng depower cleat - Micro is the most trusted cleat in the kitebaording industry. ClamCleat has called it the Aero and Racer Back Cleat. The CL828 has been a stock item on many production kitebars since the inception of the sport, and is the most commonly used cleat on custom race bars. One of the great functions of this cleat is that it is easy to move up and down the sheeting line to adjust the bar throw and sheeting range. The black color is a Hard Anodized
    CLAMCLEAT KITEBOARDING DEPOWER CLEAT MICRO
    Clamcleat
    Clamcleat Leech Line Cleat Murrays Part# 27-0212 Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through. Includes: backing plate and 2x flare rivet
    CLAMCLEAT LEECH LINE CLEAT
    Clamcleat
    Clamcleat Midi (Nylon) Murrays Part# 27-0209 Replace old, worn-out outhaul and downhaul Clamcleats®. Nylon cleats have less wear resistance than aluminum, but are less expensive. Easy to mount. Line capacity is 3/16"-5/16". 2 1/8" hole spacing.
    CLAMCLEAT MIDI (NYLON)
    Clamcleat
    Clamcleat PowerGrip I Murrays Part# 27-0261 The 27-0261 Clamcleat® Power Grip 1 is for single-handed use. It allows you to pull twice the load compared to using your bare hand and is equally suitable for right- or left-handed use. Line pulls from center of tool. The anodized aluminum tool features two sets of grip cleats to grip 1/8"-1/4" diameter lines. Tool length is 3-3/4" long. Hobie Cat® uses item Part# 2070 for the Power Grip I.
    CLAMCLEAT POWERGRIP I
    Clamcleat
    Clamcleat PowerGrip II Murrays Part# 27-0262 The Clamcleat® CL262 Power Grip 2 is for two-handed use where even more pulling power and control are required. It is light, strong and convenient to carry in your pocket. The anodized aluminum tool grips 3/32" to 1/4" diameter lines.
    CLAMCLEAT POWERGRIP II
    Clamcleat
    Clamcleat Racing 2-5mm Port Murrays Part# 27-0259 The tooth design of the CL259 Racing Fine Line (Port) allows a quick, positive lock that is easy to release. Add this to its low profile and ability to hold high loads, makes it an ideal cleat for adjusting leech lines on larger sails. Use a backplate when riveting a cleat onto fabric to prevent the rivet pulling through. It can be mounted in two positions and can be sewn or riveted to the sail. The CL259 is usually fitted to the Starboard side of a
    CLAMCLEAT RACING 2-5mm PORT
    Clamcleat
    Clamcleat Racing 2-5mm Starboard Murrays Part# 27-0258 The tooth design of the Clamcleat® CL258 Racing Fine Line (Starboard) allows a quick, positive lock that is easy to release. Add this to its' low profile and ability to hold high loads, makes it an ideal cleat for adjusting leech lines on larger sails. Use a backplate when riveting a cleat onto fabric to prevent the rivet pulling through. It can be mounted in two positions and can be sewn or riveted to the sail.
    CLAMCLEAT RACING 2-5MM STARBOARD
    Clamcleat
    Clamcleat Racing Midi Aluminum Murrays Part# 27-0254 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 5/32"-5/16". 2 1/8" hole spacing.
    CLAMCLEAT RACING MIDI ALUMINUM
    Clamcleat
    Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
    CLAMCLEAT RACING MINI
    Clamcleat
    Clamcleat Side Entry-Starboard Murrays Part# 27-0217 The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook. Also used on sport nets AND sun sails. The Clamcleat® CL217 Mk1 is available in two finishes: CL217 Mk1 has a silver stove enamel finish for a cost effective, high quality coating. CL217 Mk1AN has a hard anodized finish to give a hard wearing surface.
    CLAMCLEAT SIDE ENTRY-STARBOARD
    Clamcleat
    Clamcleat Trapeze & Vang Cleat Murrays Part# 27-0253 The Clamcleat® trapeze and vang cleat allows for 2:1 trapeze adjustment while hooked up. Line rolls easily on large base roller. 1/4" line capacity. Each. Clamcleat version of a Ronstan Part# RF5121
    CLAMCLEAT TRAP & VANG CLEAT
    Clamcleat
    Clamcleat with Top Roller (Aluminum) Murrays Part# 27-0236 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".
    CLAMCLEAT WITH TOP ROLLER (ALUMINUM)
    Clamcleat
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Clevis Pin 1/4 x 1-3/4" Murrays Part# 22-9809 Stainless steel clevis pin measures 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole)
    CLEVIS PIN 1/4 X 1-3/4"
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin Murrays Part# 22-9804 Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Prindle Part# 6004 Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    Clevis Pin 1/4 X 1/2 Murrays Part# 22-9808 Stainless steel clevis pin. Measurement is 1/4" diameter x 1/2" grip length (shoulder to the split ring hole). Substitute for Hobie Cat® #8020371.
    CLEVIS PIN 1/4 X 1/2"
    Misc
    Clevis Pin 1/4 x 2-1/4" Murrays Part# 56-4587 1/4 x 2-1/4" clevis pin for all Inter rudder assemblies. Used to hold tiller crossbar assembly to tendon. Nacra sailing factory item# 30428
    CLEVIS PIN 1/4 x 2 1/4"
    NACRA
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    3/16 X 1-1/4" Clevis Pin Murrays Part# 22-9807 Stainless steel clevis pin. Measurement is 3/16" diameter x 1-1/4" grip length (shoulder to the split ring hole). Can replace Hobie Part# 8020340 Hobie Wave Mast Head Sheave Pin
    CLEVIS PIN 3/16 X 1-1/4
    Misc
    Clevis Pin 3/16 X 5/8" Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Hobie Cat Part number 8020041
    3/16 X 5/8"Clevis Pin Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 X 5/8"
    Misc
    3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061
    CLEVIS PIN 3/16 X 7/8"
    Misc
    Clevis Pin 5/16 x 2-3/16" Murrays Part# 56-4586 Uses: This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies. Mast step pin for Hobie 21SE 21SC  Nacra sailing factory item# 30427 Same as Hobie Part# 8020611
    CLEVIS PIN 5/16 x 2 3/16"
    NACRA
    Murrays Part# 001-7050 The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    Recently viewed