In Stock

In Stock

2257 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2257 products
    Harken-22mm Low Beam Traveler Track Track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface. Specifications: -Length: 1.8 m- 3mm -Fasteners: 5 FH mm / #10 FH in -Mounting hole spacing: 100 mm / 3-15/16″ -Low-load endstop: 173 -High-load endstop: E2200 -Line shedding endstop: 446 -Trim Cap: 2722 -Splice Link: 2724 Please note: This track is compatible only with Harken low-profile traveler cars (#28-2732, #28-2736 and #28-2738)
    HARKEN-22MM LOW BEAM TRAVELER TRACK
    Harken
    Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501
    HEADLESS CLEVIS PIN 1/4 X 3-3/8"
    Misc
    Clevis Pin Headless 3/16 X 1-1/2 Murrays Part# 22-9811 Stainless steel mast step hinge pin for Hobie® 16 has a hole on each end. Measures 3/16" diameter by 1-1/2" long. Part of the Hobie mast step link kit 21380001
    HEADLESS CLEVIS PIN 3/16 X 1-1/2"
    Misc
    HEAVY DUTY HAND RIVET TOOL
    HP
    Heavy Duty Swivel Plate for Cleat and Bullseye Murrays Part# 25-3012 Heavy Duty Swivel Plate for Cleat and Bullseye. The HD swivel is the base plate for many catamaran and dingy sheeting systems. Found on all models of Hobie cats, as well as many Nacra and Prindle catamarans, as well as dingies, larger sailboats and cruising craft. The HD version of our Swivel Plate
    HEAVY DUTY SWIVEL PLATE FOR CLEAT AND BULLSEYE
    Murrays Sports
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM AND ROLLER FAIRLEAD
    Murrays Sports
    Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE
    Murrays Sports
    Nut Hex MS #6-32 (Brass) Murrays Part# 19-2010 Brass hex nut fits Pocket Protector kits #01-1001 and #01-1002. Measurements are diameter and threads per inch.
    HEX NUT #6-32 (BRASS)
    Misc
    Nut Hex MS #8-32 Stainless Steel Murrays Part# 19-2016 Stainless steel #8-32 hex nut. Measurements are diameter and threads per inch. Compare to Hobie Cat® #8050801.
    HEX NUT MS #8-32 (SS)
    Misc
    Hi-Low Trapeze Adjustment Kit with Handle Murrays Part# 001-1140 Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring
    HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE
    Murrays Sports
    HIKING STRAP WEBBING 2" BLACK
    Misc
    Sale
    Hobie 14 and Early Wave Mast Step
    Hobie
    Save $14.95
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    Comp-Tip Assembly H16 Murrays Part# 50-20611100 New Comp Tip assembly for Hobie 16. Hobie Part# 20611100
    HOBIE 16 COMP-TIP ASSEMBLY
    Hobie
    HOBIE 16 GLOBAL EDITION
    Hobie
    Hobie 16 jib traveler car 21380000, jib sheet block, slider, control...
    HOBIE 16 JIB TRAVELER CAR AND PULLEY
    Hobie
    H16 Mast Hinge Kit Murrays Part# 001-3021 The Hobie 16 Mast Hinge Kit by Murrays aids in raising and lowering the mast of a Hobie® 16. Complete heavy duty hinge assembly includes special pins with retainers to prevent loss. This hinge requires complete removal before sailing. Note: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. 21380001
    HOBIE 16 MAST HINGE KIT
    Murrays Sports
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    Hobie 17 rear crossbar used
    Hobie
    Murrays Part# 001-4045 Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18. Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
    Hobie 18 mast bearing 60110000 and 1132
    HOBIE 18 MAST BEARING KIT
    Murrays Sports
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    Hobie Bravo Sail Bag Murrays Part# 50-90992000 Store your Hobie Bravo mainsail in this convenient heavy duty bag.
    HOBIE BRAVO SAIL BAG
    Hobie
    Hobie Halyard - Downhaul Cheek Block - 20710000 Murrays Part# 25-3340 The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end. To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings. Hobie Cat® Part# 20710000.
    HOBIE CHEEK BLOCK - 20710000
    Hobie
    HOBIE CHEEK BLOCK WITH RIVETS
    Murrays Sports
    HOBIE CROAKIES GLASSES RETAINERS
    Hobie
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW - 60450000
    Hobie
    Hobie Drain Plug Screw Murrays Part# 50-8031731 This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18 Hobie Part# 8031731
    HOBIE DRAIN PLUG SCREW
    Hobie
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    HOBIE DRAIN PLUG WITH GASKET
    Misc
    Hobie European Rudder Cam Murrays Part# 51-14061180 Hobie Europe factory replacement rudder cam. Similar but not exactly the same as the US version. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Hobie part# 14061180
    HOBIE EUROPEAN RUDDER CAM
    Hobie
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    Hobie EZ Lock Rudder retainer clip Murrays Part# 50-90880231 Retainer clip for Hobie Bravo EZ Loc Rudder Housing. Hobie Part# 90880231
    HOBIE EZ LOCK RUDDER CLIP
    Hobie
    Sale
    HOBIE FULL AUTO HARNESS - SMALL
    Hobie
    Save $96
    Hobie FX One Shroud Bare
    Hobie
    HOBIE GETAWAY
    Hobie
    HOBIE GETAWAY MAST ASSEMBLY
    Hobie
    Gooseneck Boom Pin Murrays Part# 50-50502201 Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint. Hobie Part# 50502201
    HOBIE GOOSENECK BOOM PIN
    Hobie
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    Hobie Halyard Ring with Loop Murrays Part# 50-61290021 Stainless steel halyward ring with loop, used on many Hobie Cat sailboats. Recommended for use with Hobie's twisted halyard shackle Hobie Part# 61290021
    HOBIE HALYARD RING WITH LOOP
    Hobie
    Recently viewed