In Stock

In Stock

2257 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2257 products
    Harken 6mm Stamped Shackle Murrays Part# 28-0138 Harken's stainless stamped D-shackle has 1/4" diameter pin. For Harken 3.00" blocks. Stamped shackles are used on most Harken Small Boat Blocks and are appropriate for low loads. For higher loads, select forged and high-resistance shackles instead.
    HARKEN 6MM STAMPED SHACKLE
    Harken
    Harken 75mm Triple Ratchamatic Block-Swivel, Becket, Cam Cleat, 57mm Block Murrays Part# 28-2687 The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
    HARKEN 75MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, BECKET, CAM CLEAT, 57MM BLOCK
    Harken
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    Harken Standard Cam-Matic Cleat -150 Murrays Part# 28-0150 For high load/high-wear applications. Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Three rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.
    HARKEN ALUMINUM CAM-MATIC CLEAT-150
    Harken
    Harken Ball Bearing Delrin 1/8" Murrays Part#  28-HSB243 Harken 1/8" replacement Delrin ball bearings are sold individually.
    HARKEN BALL BEARING DELRIN 1/8" (EACH)
    Harken
    Harken Becket Roller Murrays Part# 28-HSB26 Replacement becket roller for Harken blocks measures 3/4" long by 1/2" diameter with 1/4" hole.
    HARKEN BECKET ROLLER
    Harken
    Harken 7:1 Carbo Ratchamatic Base Block. Harken HSB360
    HARKEN BLOCK 7:1 CARBO RATCHAMATIC BASE
    Harken
    Harken Block Double Micro Murrays Part# 28-0226 Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: 1/4" maximum line capacity 350 lb. SWL 1200 lb. breaking strength 2" long Harken Part# 226 Hobie Part# H226S
    HARKEN BLOCK DOUBLE MICRO
    Harken
    Harken Calibration Strip Murrays Part# 28-2306 This handy, self-stick scale takes the guesswork out of setting the downhaul. The scale is marked in 1/2" increments to 10". The sticker can also be used as an outhaul scale, or jib track measurement guide. Features both vertical and horizontal numbers so it can be used on the mast or the crossbar.
    HARKEN CALIBRATION STRIP
    Harken
    Harken Cam Arm Cover Left 57mm with Nut Murrays Part# 28-2653 One Harken replacement right or left 57mm side cover washer for #28-2629 Carbo Ratchamatic base block. #28-2652 Right cam arm washer 57mm is Harken #H-26521B. #28-2653 Left cam arm cover 57mm with nut is Harken #HSB524.
    HARKEN CAM ARM COVER LEFT 57MM WITH NUT
    Harken
    Harken Cam Base-16mm Sheave and Adjustable Angle Micro Murrays Part# 28-9051 The 9051 adjustable cam swivel base with 468 Micro Cam-Matic cleat provides precise cleating. The cleating angle adjusts infinitely in a 5-17 degree range up and down for optimal line lead. The 16 mm sheaves feature low-friction stainless steel ball bearings to handle high loads, ideal for controls where cleating angles change dramatically.
    HARKEN CAM BASE - 16MM SHEAVE ADJUSTABLE ANGLE MICRO
    Harken
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN CARBO STANDUP FIXED 29MM
    Harken
    Harken Fairlead Spacer F18 Murrays Part# 28-4022 Mounted on a mainsheet base block, this plastic spacer provides a smooth surface to guide the line for the fairlead. Sold individually
    HARKEN F18 FAIRLEAD SPACER
    Harken
    Harken Fairlead for Roller Furling Drum Murrays Part# 25-1066 A fairlead directs line to coil evenly on a roller furling drum, reducing snagging and increasing drum line capacity.
    HARKEN FAIRLEAD FOR ROLLER FURLING DRUM
    Harken
    Harken Gloves 3/4 Finger Classic Sailing Glove The perfect all-purpose glove. Double-thick Black Magic® material for superior grip. Minimal stretch when wet, dries soft. Durable nylon spandex mesh. Full-finger or 3/4 finger. Tab lock for secure closure. Junior size available. Use this page to order Sticky Race Short Gloves product numbers: 28-2385 XS 28-2386 S 28-2387 M 28-2388 L 28-2389 XL 28-2390 XXL
    HARKEN GLOVES 3/4 FINGER CLASIC SAILING GLOVE
    Harken
    Harken H16 Race 6:1 Main Sheet System Murrays Part# 28-61p The 6:1 Race Mainsheet System is a low profile mainsheet system is super light weight and allows for maximum mast rake. The base block is the 57mm Harken Carbo Ratchamatic from our regular 6:1 system with a 40mm carbo triple on the top. The Harken 57mm base block has a load sensing ratcheting system to help hold the line when it is under tension.
    HARKEN H-16 RACE 6:1 MAIN SHEET SYSTEM
    Harken
    Harken Micro Cam Base-Swivel, 16mm Sheaves Murrays Part# 28-0462 Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks.
    HARKEN MICRO CAM BASE-SWIVEL, 16MM SHEAVES
    Harken
    Harken Micro Cam Cleat Spring H423 Murrays Part# 28-0057 The Harken Cam-Matic Spring for H423- Cam spring for discontinued Harken cams #338 and #423.  Harken Part# MS-093
    HARKEN MICRO CAM CLEAT SPRING
    Harken
    Harken Micro Cam-Matic Cleat Murrays Part# 28-0468 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
    HARKEN MICRO CAM-MATIC CLEAT
    Harken
    Harken Micro Cam-Matic with Wire Fairlead Murrays Part# 56-31470 Nacra Part# 31470
    HARKEN MICRO CAM-MATIC WITH WIRE FAIRLEAD
    Murrays Sports
    Harken Micro Carbo-Cam Cleat Murrays Part# 28-0471 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
    HARKEN MICRO CARBO-CAM CLEAT
    Harken
    Harken Micro Carbo-Cam Kit-Wire Fairlead Murrays Part# 28-0473 ​Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.
    HARKEN MICRO CARBO-CAM KIT-WIRE FAIRLEAD
    Harken
    Harken Micro Fast Release Fairlead Murrays Part# 28-0495 ​The 494 and 495 Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take-downs during mark roundings—anywhere fast release is crucial. Harken Cam fairleads are made of tough, abrasion-resistant composite. Use the 495 with 468 and 471 Micro Cam-Matics®.
    HARKEN MICRO FAST RELEASE FAIRLEAD
    Harken
    +1
    HARKEN MICRO FLAIRLEAD
    Harken
    Harken Micro Wedge Kit Murrays Part# 297 Micro cam wedge kit fits #28-0468 and #28-0471 Harken cam cleats. Weighs .16 oz.; 1-1/16 " fastener spacing. Harken Part#297 Hobie part# H297
    HARKEN MICRO WEDGE KIT
    Harken
    Harken Micro Wire Fairlead Murrays Part# 28-0475 Harken's wire fairlead places the fairlead ahead of the cam and holds line at cleat when not in use. Fits Harken 468 and 471 cams. Wire fairleads maintain a low profile while holding the line close to the cleat.
    HARKEN MICRO WIRE FAIRLEAD
    Harken
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Harken Screw: Cleat Position (Short) Murrays Part# 28-HFS1 Short screw is used to adjust cam cleat angle position on Harken "Classic" (not Carbo) base blocks.
    HARKEN SCREW: CLEAT POSITION (SHORT)
    Harken
    Harken Shackle Stamped 3/16" Murrays Part# 28-0072 Harken's stainless stamped D-shackle has 3/16" diameter pin. For Harken 2.25" blocks
    HARKEN SHACKLE STAMPED 3/16"
    Harken
    Harken Standard 15° Angled Riser Murrays Part# 28-0296 ​Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Fits cam 365 Harken Part# 296
    HARKEN STANDARD 15° ANGLED RISER
    Harken
    Harken Standard Cam Cleat Spring Murrays Part# 28-0056 The Harken Cam-Matic Replacement Spring for 150, 365 for cleats #28-0150 and #28-0365.  Harken Part# MS-006
    HARKEN STANDARD CAM CLEAT SPRING
    Harken
    Harken Standard Carbo-Cam Cleat Murrays Part# 28-0365 Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.
    HARKEN STANDARD CARBO-CAM CLEAT
    Harken
    Harken Standard Flairlead Fiber-reinforced plastic flairlead mounts on Harken aluminum or Carbo Cam cleat to allow the cleat to be used when lines enter or leave the cam at unfair angles. Length (in) 2 3/16 in Length (mm) 56 mm Width (mm) 21 mm Width (in) 1 3/16 in Weight (g) 7 g Weight (oz) 0.25 oz Fastener spacing (mm) 38 mm Fastener spacing (in) 1 1/2 in Height above cam (in) 5/8 in Height above cam (mm) 16 mm Fits cam 365 Harken Part# 425
    +1
    HARKEN STANDARD FLAIRLEAD
    Harken
    Harken Standard Furling Drum-3mm Luff Wire Murrays Part# 28-0165 Harken's high load drum features multiple stacked races of bearings to ensure smooth rotation under load.
    HARKEN STANDARD FURLING DRUM-3MM LUFF WIRE
    Harken
    Harken Standard Furling Swivel-3mm Luff Wire Murrays Part# 28-0164 One of the simplest, strongest and least expensive roller furling swivels for roller furling jibs. SWL of 950 lbs.; distance between pins is 2-1/2". Harken Part# 164
    HARKEN STANDARD FURLING SWIVEL-3MM LUFF WIRE
    Harken
    Harken Standard Wedge Kit Murrays Part# 28-0145 Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Harken 15-degree wedge kit fits Harken 150 (#28-0150) and 365 Cam-Matics (#28-0365). 1-1/2" fastener spacing.  Harken Part#145 Hobie Part# H145 
    HARKEN STANDARD WEDGE KIT
    Harken
    Harken Standard X-Treme Angle Fairlead Murrays Part# 28-0150 The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. fits #28-0468 Micro Cam-Matic Aluminum and 28-0471 Micro Carbo Cam. Specifications: 7/8" height above cam; 1-7/16" high; 1-5/16" long; 2" wide; weighs 1 oz.; 1-1/16" fastener spacing. Harken Part# 375
    HARKEN STANDARD X-TREME ANGLE FAIRLEAD
    Harken
    Harken Traveler Car Bearing Loader
    HARKEN TRAVELER CAR BEARING LOADER
    Harken
    Harken Traveler Car End Plates Murrays Part# 28-HSB78 End cap kit for #28-0214 Harken traveler car includes 2 end caps, screws, blue loc-tite and instructions. Sold as a pair
    HARKEN TRAVELER CAR END PLATES (2)
    Harken
    Harken Triple Micro Block Murrays Part# 28-0228 Harken 22mm ball bearing micro triple block with stainless side plates. Specifications: 1/4" maximum line capacity 500 lb. SWL 1200 lb. breaking strength 7/8" sheave 2" long Harken Part# 228 Hobie part# H228 
    HARKEN TRIPLE MICRO BLOCK
    Harken
    Recently viewed