Hobie Wave Rudder Parts

Hobie Wave Rudder Parts

65 products

    Rudder Parts for your Hobie Wave.

    65 products
    Out of Stock
    EZ LOC RUDDER ASSEMBLY/WAVE
    Hobie
    Out of Stock
    RUDDER HOBIE EPO-3 16
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    Out of Stock
    RUDDER CAST LOWER H17/18/20B
    Hobie
    Out of Stock
    RUDDER CAST H17/18/20 UPR LEFT
    Hobie
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR
    Hobie
    Out of Stock
    Fiberglass Tiller H14/16 Murrays Part# 50-20550001 84" Hobie Fiberglass Tiller Extension The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.
    FIBERGLASS TILLER H14/16
    Hobie
    Out of Stock
    HOBIE RUDDER BLADE - NYLON
    Hobie
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    HOBIE WAVE EZ LOC TILLER CROSS BAR Murrays PN 50-39524001 Hobie® factory replacement tiller crossbar assembly for Wave with EZ Loc rudder system. Hobie part number 39524001
    WAVE EZ LOC TILLER CROSS BAR
    Hobie
    Out of Stock
    HOBIE WAVE/GETAWAY TILLER CONNECTION KIT
    Hobie
    Hobie EZ Loc Rudder Housing 50-50313001 EZ Loc Rudder Housing for Hobie Bravo EZ Loc Rudder Housing for Hobie Getaway EZ Loc Rudder Housing for Hobie Wave Hobie part number 50313001 Fits Hobie Wave and Hobie Bravo and Hobie Getaway
    HOBIE EZ LOC RUDDER HOUSING
    Hobie
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    Out of Stock
    WAVE TILLER ARM
    Hobie
    Out of Stock
    Hobie Wave EZ loc tiller arm
    Hobie
    H17/18/20/21/Wave and Getaway Rudder Cam Kit Murrays Part# 001-3550 The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.
    H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT
    Murrays Sports
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    RUDDER LOCKING KIT - H-17/18/20 and 21
    Murrays Sports
    EZ Lock Upper Pintle Murrays Part# 50-90880211 Hobie® factory replacement upper pintle for EZ Loc rudder system. Fits Hobie Bravo and Getaway boats Hobie Part# 90880211
    EZ LOCK UPPER PINTLE
    Hobie
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    EZ LOC UP-LOCK PIN KIT Murrays PN 50-50314001 The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position. Hobie Part Number 50314001
    HOBIE EZ LOC UP LOCK PIN KIT
    Hobie
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    HOBIE WAVE LOWER PINTLE
    Hobie
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    TILLER ARM END CAP SWIVEL
    Hobie
    Hobie Getaway Tiller Connector Screw Murrays Part# 50-40530021 Hobie® factory replacement tiller connector screw for Club Wave. Hobie Part# 40530021
    HOBIE GETAWAY TILLER CONNERCTOR SCREW
    Hobie
    HOBIE TENDON KIT (PRE EZ LOC)
    Hobie
    Out of Stock
    TILLER END CAP WITH PIN
    Hobie
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM - 10480000
    Hobie
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Hobie EZ Loc Lower Rudder Housing Tube Rivet Murrays Part# 50-50313301 Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems.  Hobie Part# 50313301
    HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET
    Hobie
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    HOBIE WAVE KEEPER PIN WITH LANYARD
    Hobie
    Out of Stock
    Detent Plunger EZ Lock System Murrays Part# 50-20492021 Hobie Cat® factory detent plunger for EZ Loc rudder assembly. Hobie Bravo, Getaway and Wave Hobie Part# 20492021
    DETENT PLUNGER EZ LOCK SYSTEM
    Hobie
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Murrays Sports
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW
    Hobie
    Hobie Tiller End Cap (Tendon Style) Murrays Part# 50-37561001 Hobie® factory replacement tendon-style tiller end cap Hobie Part# 37561001
    HOBIE TILLER END CAP (TENDON STYLE)
    Hobie
    Retainer Clip EZ Lock Rudder Housing Murrays Part# 50-90880231 Retainer clip for Hobie Bravo EZ Loc Rudder Housing. Hobie Part# 90880231
    RETAINER CLIP EZ LOCK RUDDER HOUSING
    Hobie