Hobie Wave Rudder Parts

Hobie Wave Rudder Parts

66 products

Rudder Parts for your Hobie Wave

66 products

Sort

Screw Delrin 3/8-16 X .75"

Murrays Part# 50-8032001

Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System.

Hobie Part# 8032001

SCREW DELRIN 3/8-16 X .75"

Hobie Wave Lower Pintle Bushing

Murrays Part# 50-38360001

This is the lower bushing for the original Wave or Getaway rudder castings. This fits into the aluminum rudder castings PRE- EZLoc rudder assemblies. This also fits Getaway and Bravo Pre-Ez Loc assemblies.

Hobie Part# 38360001

HOBIE WAVE LOWER PINTLE BUSHING

Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK

H-20 TILLER CONNECTOR RETAINER CLIP

Hobie rudder bushing. Hobie part number 8062001

RUDDER TITE BUSHING EACH

Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock

HOBIE TILLER CONNECTOR INSERT BEARING

Bolt 5/16-18 x 2-1/2" HX HD

Murrays Part# 50-8040321

EZ Loc Lower Rudder Bolt for Hobie Bravo, Getaway and Wave.

Hobie Part# 8040321

BOLT 5/16-18 x 2-1/2" HX HD

Tiller Connection Kit
Murrays Part# 001-2061
The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052.
Applications:; Hobie 14, 16, 17, 18, 18SX

PLASTIC CONTOURED SPACER

Bolt 5/16-18 x 2-3/4" HX HD

Murrays Part# 50-8040391

EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave 

Hobie Part# 8040391

BOLT 5/16-18 x 2-3/4" HX HD

Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel)

Murrays Part# 19-2229S

Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20

Upper adjustable rudder castings.

Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive.

Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.

BOLT 5/16-18 X 1.5" (SS)

Bolt Hex Head 5/16-18 X 1.5"

Murrays Part# 19-2229

Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting.

Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164

BOLT HEX HEAD 5/16-18 X 1.5"

Sealed Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.

RIVET CCP SEALED 6-8 (3/16 X 1/2)

Bolt Hex 5/16-18 X 1"

Murrays Part# 50-8040171

Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20.

Hobie Part# 8040171

BOLT HEX 5/16-18 X 1"

Bolt 5/16-18 X 2"

Murrays Part# 50-8040331

Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System.

Hobie Part# 8040331

BOLT 5/16-18 X 2"

Hobie factory replacement long lock screw for EZ Loc rudder system. Specs: 12-24X3/4 long lock PHMS screw Hobie PN 8030411

EZ LOC LONG SCREW

GETAWAY WING PIN/EZ LOC RUDDER LANYARD

Replacement lanyard for Hobie Getaway Wing Pins and EZ Loc rudder up pin kit.

Hobie part number 50314001

HOBIE GETAWAY WING LEG LANYARD

NUT NYLOCK 5/16"-18 LOW PRO

3/16 - 1/4" Split Ring
Murrays Part# 22-9492
Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler
Medium Split ring
Dimensions: 5/8″ Diameter
Material: 316 Stainless steel.
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.

3/16-1/4" SPLIT RING

Nut Nylock 5/16-18 Stainless Steel
Murrays Part# 19-2520
5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut
Used with Hobie Getaway Bow Tang Bolt

NUT NYLOCK 5/16-18 (SS)

1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR

NYLON 1/2" BALL

FIBER TENDON SCREW

NUT 10-32 NYLOCK LOW PROFILE

Washer 3/8 X 3/4 Nylon for 07-1953
Murrays Part# 50-8080691
Washer for tiller arm bolt #50-8040171. Hobie® factory item

WASHER NYLON 3/8 X 3/4"

WASHER STAINLESS STEEL 1/4 x 1/2 x .032"

Washer 5/16 x 3/4 Flat SS

Murrays Part# 50-8080671

EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave

Hobie Part# 8080671

WASHER STAINLESS STEEL 5/16 x 3/4" FLAT

Washer 5/16 X 9/16 Flat

Murrays Part# 50-8080181

Hobie Part# 8080181

WASHER FLAT 5/16 X 9/16"

Cotter Pin 3/32 X 3/4
Murrays Part# 19-1015
Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111.
Stainless steel cotter pin measures 3/32" x 3/4".

COTTER PIN 3/32 X 3/4" SS

Previous 1 2

Recently viewed

Hobie Wave Rudder Parts