Hobie Miracle 20 Upgrades and Accessories

46 products

    46 products
    Out of Stock
    RF RIG KIT H-20 (HOBIE-Style)
    Murrays Sports
    CHEATA MOTOR BRACKET
    Murrays Sports
    ECONO BOAT COVER
    Murrays
    POWERSTICK TELESCOPING CARBON TILLER 62-115" - YOKE STYLE
    Murrays Sports
    PowerStick Telescoping Carbon Tiller Extension 64-115" The PowerStick Telescoping Carbon Tiller Extension is a strong, ultra lightweight, adjustable length tiller. Ideal for use on all Hobie, Prindle and Nacra catamarans, as well as A-Cats, Corsair and Farrier Trimarans. The Powerstick locks by twisting the grip either direction. It is possible to twist the grip 360 past the locking point which is great if you forget which direction you locked it in. The locking action is smooth and grips
    CARBON TELESCOPING TILLER 62-115" - UNIVERSAL TENDON
    Murrays Sports
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    OXEN 3" BLOCK W/PIN & BECKET
    Oxen
    Catamaran Boat Yard Cover
    MISC
    Hobie 1953 tiller connection kit - new style
    TILLER CONNECTOR: H-20
    Hobie
    Out of Stock
    CAT TRAX CRADLES (PAIR)
    Cat Trax
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    Murrays Deluxe Sail and Boom Bag
    Murrays Sports
    The Murrays Jib Snorkel will protect your roller furling jib from ultraviolet light and weather while on or off the boat.
    Murrays Jib Snorkel
    Murrays Sports
    SAIL & BOOM BAG "Big Dryer"
    Murrays Sports
    H20 Upper Forestay 5/32" Black Wire with Roller Furling Murrays Part# 002-0735-02 Black upper forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications. Compare to Hobie Cat® Part# 40810011
    H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Sale
    Comp-Tip Cover: H-16/18/20 Murrays Part# 31-2441 Hobie Cat recommends that CompTips on Hobie 16, 17, 18 and 20 be covered to protect them from ultraviolet light. Top quality polyester material is treated for UV-resistance and provides much better and long-lasting protection than nylon covers. Highly visible, red-tip reinforced end. Cover ties to mast with included line.
    COMP-TIP COVER: H16/18/20
    Murrays Sports
    Save $81
    Hull Cradle: Universal Murrays Part# 13-7010
    HULL CRADLE: UNIVERSAL
    Murrays Sports
    Out of Stock
    Hull Cradle: V Shaped Murrays Part# 13-7020
    HULL CRADLE: V SHAPED
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA DECK GRIP KIT
    Murrays Sports
    SNAP SHACKLE W/TACK 1/4"
    Ronstan
    Sale
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    MURRAYS HOBIE RUDDER COVER
    Murrays Sports
    Save $24
    TELO-CAT BRIDLE VANE
    Davis
    Out of Stock
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4 WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1 WITH LANYARD
    Misc
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1
    Misc
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Sailing
    Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect—
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    SNAP SHACKLE W/TACK 1/4"
    Murrays Sports
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2 WITH LANYARD
    Misc
    PORT FASTENER KIT
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Misc
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE
    Davis
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    SUPER GOOSE H-17/18/20/21
    Tren-Tec
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    PINS & RINGS KIT:H-17/20/NACRA
    Murrays Sports
    CLAMCLEAT W/TOP ROLLER
    Clamcleat
    Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat.
    SHROUD ADJUSTER COVERS 11"
    Murrays Sports
    3/4" ADJUSTABLE FOAM LEECH CAPS (10)
    Tren-Tec