Hobie 18 Rudder and Steering Parts

64 products

    Rudder and Steering Parts for your Hobie 18

    64 products
    Out of Stock
    RUDDER HOBIE EPO-3 16
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    Out of Stock
    RUDDER CAST LOWER H17/18/20B
    Hobie
    Out of Stock
    RUDDER CAST H17/18/20 UPR LEFT
    Hobie
    POWERSTICK TELESCOPING CARBON TILLER 62-115" - YOKE STYLE
    Murrays Sports
    PowerStick Telescoping Carbon Tiller Extension 64-115" The PowerStick Telescoping Carbon Tiller Extension is a strong, ultra lightweight, adjustable length tiller. Ideal for use on all Hobie, Prindle and Nacra catamarans, as well as A-Cats, Corsair and Farrier Trimarans. The Powerstick locks by twisting the grip either direction. It is possible to twist the grip 360 past the locking point which is great if you forget which direction you locked it in. The locking action is smooth and grips
    POWERSTICK TELESCOPING CARBON TILLER EXTENTION 62-115" - UNIVERSAL TENDON
    Murrays Sports
    Out of Stock
    TILLER X-BAR Hobie 16/17/18 Post 95
    Hobie
    Hobie Lower Rudder Casting H18/ H20/ H17
    Hobie
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR
    Hobie
    Out of Stock
    Fiberglass Tiller H14/16 Murrays Part# 50-20550001 84" Hobie Fiberglass Tiller Extension The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.
    FIBERGLASS TILLER H14/16
    Hobie
    Out of Stock
    HOBIE RUDDER BLADE - NYLON
    Hobie
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    Tiller End Cap Kit
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    Murrays 84" Fiberglass Tiller Extension
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    H17/18/20/21/Wave and Getaway Rudder Cam Kit Murrays Part# 001-3550 The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.
    H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT
    Murrays Sports
    Out of Stock
    TILLER ARM STRAIGHT H18 BK
    Hobie
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4 WITH LANYARD
    Misc
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Quick Release Deluxe Pin 1/4 X 1.25" Murrays Part# 18-4M125 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Uses: This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans. Also used on Hobie 18 SX and Hobie Magnum wings. Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/4"
    Misc
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    RUDDER LOCKING KIT - H-17/18/20 and 21
    Murrays Sports
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    GUDGEON LOWER H14/16/17 all 18
    Murrays Sports
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Sailing
    Hobie Tiller Extension Hinge Murrays Part# 50-10532010 Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers. Hobie Part Number: 10532010
    HOBIE TILLER EXTENSION HINGE
    Hobie
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM - 10480000
    Hobie
    Soft Grip Standard Extension .570 x 11" Murrays Part# 007-3206 This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well. Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    KISME KLEET (4)
    Misc
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    H-20 TILLER CONNECTOR POST
    Hobie
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Murrays Sports
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW
    Hobie