Hobie 18 rigging - Shroud, forestay, bridles, diamond wires

Hobie 18 Rigging Parts

82 products

    Standing and Running Rigging parts for your Hobie 18.  Forestay, roller fruler, diamond wire, bridle, shroud, side stay, trapeze wire, upper forestay, trapeze rings.

    82 products
    Hobie 18 rigging set: Forestay, upper forestay, shrouds, bridles, trapeze wires
    H-18 RIGGING KIT
    Murrays Sports
    HOBIE ROLLER FURLER DRUM ASSEMBLY
    Hobie
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    3" OXEN BLOCK WITH PIN & BECKET
    Oxen
    Out of Stock
    ROLLER FURLING DRUM REBUILT
    Hobie
    Save $129
    57mm Harken Ratchamatic Block — Swivel, Becket, Cam Cleat Murrays PN 28-2628 ​The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. Harken Part No. 2628​ HOBIE 18 JIB SHEET BLOCK - HARKEN 60330041
    HARKEN 57MM RATCHAMATIC - SWIVEL, BECKET, CAM CLEAT
    Harken
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines.  The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7". Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib L
    H-18SX LINE PACKAGE
    Murrays Sports
    The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines. Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib Luff Tension Line
    H-18 LINE PACKAGE
    Murrays Sports
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Note: The H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging. Compare to Hobie Part# 61750001
    H-18 DIMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
    Ronstan
    Hobie 18 TRAPEZE WIRE - WHITE 1473W, BLACK 1473B
    H-18/21SC DOUBLE TRAPEZE (4)
    Murrays Sports
    Murrays Part# 001-1130 Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. Show with can't miss rings and trap shock cord. Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    H18 SX Double Trapeze (4 handles) The SX has a taller mast and longer trap wires than the standard Hobie SE and Magnum versions. The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adj
    H-18SX DOUBLE TRAPEZE (4)
    Murrays Sports
    H18 Diamond Wire Complete Murrays Part# 50-61750001 Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
    H-18 DIAMOND WIRE COMPLETE
    Hobie
    H18SX Forestay 5/32" Black Wire Murrays Part# 002-0645-12 Black forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68814501
    H-18SX FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H18SX Upper Forestay 5/32" Black Wire Murrays Part# 002-0635-02 Black upper forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68813501
    H-18SX UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H-18/21SC UPPER FORESTAY 5/32" WIRE
    Murrays Sports
    H18SX Diamond Wire without Turnbuckle Murrays Part# 002-0694-20 Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Compare to Hobie Cat® Part# 68750001
    H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    H18 Dimond Wire without Turnbuckle Murrays Part# 002-0494-20 Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required. The change to the left handed thread happened some time in the early 80's.
    H-18 DIAMOND WITHOUT TURNBUCKLE
    Murrays Sports
    Hobie 18 shroud - side stay - Hobie part number 6079001 white and 60792001 black
    H-18/21 SC SHROUD 5/32" ROLLER SWAGED
    Murrays Sports
    Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black
    H-18/21SC FORESTAY 5/32" WIRE
    Murrays Sports
    H-18SX Shroud Roller Swaged 5/32" Black Wire Murrays Part# 002-0605-12 Single black shroud (sidestay) for Hobie® 18SX is hydraulically swaged for extra strength and a cleaner connection. Constructed to factory specifications. Compare to Hobie Cat® Part# 68793501
    H-18SX SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H18 Roller Furler Tube Murrays Part# 50-61910000 Hobie® factory replacement roller furler tube for roller furler. Hobie Part# 61910000
    H-18 ROLLER FURLER TUBE
    Hobie
    Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black.
    H-18 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    H-16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    H18SX Bridle 5/32" Black Wire Murrays Part# 002-0615-22 Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications. Compare to Hobie Cat® Part# 60822001 Black or 60820001 White
    H-18SX BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Out of Stock
    Ronstan Eye & Eye Swivel Murrays Part# 21-0078 This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.
    RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)
    Ronstan
    The tune-up kit for Hobie® roller furling drum 61900000 includes all of the items that commonly wear or break (bearings, bearing cage, nyliner, nylon sleeve, darby rings, spool and housing). Murrays.com
    HOBIE ROLLER FURLER TUNE-UP KIT
    Hobie
    H18SX Jib Halyard with Shackle Murrays Part# 002-0686-00 Jib halyard with shackle for Hobie® 18SX is constructed to factory specifications.; Use 20' of 1/8" line to to complete your jib halyard or our jib halyard kit with sister clips. links below in related items. Compare to Hobie Cat® Part# 68661001
    H-18SX JIB HALYARD WITH SHACKLE
    Murrays Sports
    Sale
    H-16/18 Jib Halyard Block Assembly Used
    Hobie
    Save $24.99
    Hobie Stainless Steel Roller Furler Sleeve Murrays Part# 50-61950001 Hobie Roller Furler Sleeve is a Hobie factory replacement stainless steel roller furler sleeve. Hobie Part# 61950001
    HOBIE ROLLER FURLER SLEEVE (SS)
    Hobie
    JIB CLEW BLOCK KIT
    Murrays Sports
    H-18/21 Sport Cruiser Jib Halyard with Shackle Murrays Part# 002-0486-00 Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications. Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging. Order Jib Halyard line separately: 20' of 1/8" line Murrays Part# 39-0221
    H-18/21SC JIB HALYARD WITH SHACKLE
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    TURNBUCKLE COMPLETE 5/32"
    Misc
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Murrays Sports
    Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    Ronstan Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs
    RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four
    H-18 TRAP SHOCK CORD (4)
    Murrays Sports
    Recently viewed