Hobie 18 rigging - Shroud, forestay, bridles, diamond wires

Hobie 18 Rigging Parts

82 products

    Standing and Running Rigging parts for your Hobie 18.  Forestay, roller fruler, diamond wire, bridle, shroud, side stay, trapeze wire, upper forestay, trapeze rings.

    82 products
    Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard Murrays Part# 18-4M075L This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to
    QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD
    Misc
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    HOBIE JIB HALYARD BLOCK SHEAVE Murrays PN 50-61260000 Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s. Hobie part number 61260000 and 61260010
    HOBIE JIB HALYARD BLOCK SHEAVE
    Hobie
    H18 Jib Furler Bearing (Race) Murrays Part# 50-61920000 Hobie® factory replacement bearing race for Hobie roller furler drum. Hobie Part# 61920000
    H-18 JIB FURLER BEARING (RACE)
    Hobie
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    H18 Roller Furler Yoke Assembly Murrays Part# 50-61980000 Hobie® factory replacement yoke assembly for roller furler. Hobie Part# 61980000
    H-18 ROLLER FURLER YOKE ASSEMBLY
    Hobie
    H-18/20 JIB HALYARD WITH CLIP
    Murrays Sports
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK WITH FERRULE
    Ronstan
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    Roller Furler Spool Housing Murrays Part# 50-61960001 Hobie® factory replacement spool and housing for roller furler.
    ROLLER FURLER SPOOL & HOUSING
    Hobie
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    10 Hole Hobie shroud adjuster
    10 HOLE SHROUD ADJUSTER
    Misc
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    Ronstan bow shackle measurements
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    Roller Furling Drum Forestay Adjuster Murrays Part# 50-60830000 Hobie® factory replacement 13-hole adjuster for roller furler. Hobie Part# 60830000
    ROLLER FURLING DRUM FORESTAY ADJUSTER
    Hobie
    Out of Stock
    Twist Toggle: Hobie/Prindle Murrays Part# 25-3320 Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000.
    HOBIE/PRINDLE TWIST TOGGLE
    Hobie
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    DIAMOND WIRE ROLLER
    Misc
    H18 Jib Furler Bearing (Cage) Murrays Part# 50-61930000 Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000. Hobie Part# 61930000
    H-18 JIB FURLER BEARING (CAGE)
    Hobie
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN 3/16 D SHACKLE
    Ronstan
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    Ronstan bow shackle measurements
    RONSTAN STAINLESS STEEL BOW SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    Out of Stock
    HOBIE ROLLER FURLING DRUM 1" NYLINER
    Hobie
    Roller Furling Darby Ring (Small) Murrays Part# 50-8062501 Hobie® factory replacement small Darby ring for roller furler. Hobie Part# 8062501
    ROLLER FURLING DARBY RING (SMALL)
    Hobie
    Out of Stock
    H18 Nylon Roller Furler Sleeve Murrays Part# 50-61940000 Hobie® factory replacement nylon sleeve for roller furling assembly. Hobie Part# 61940000
    HOBIE NYLON ROLLER FURLER SLEEVE
    Hobie
    Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line
    EZ-UP TRAP KIT: HARKEN - similar to Hobie part number 3102
    NYLON ROPE LOCK
    Murrays Sports
    Ronstan Stainless Thimble for 5mm (3/16") Wire Ronstan thimble is used on shrouds. Constructed of grade 316 stainless steel. Weight: .2 oz.
    RONSTAN STAINLESS THIMBLE FOR 5MM (3/16") WIRE
    Ronstan
    3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061
    CLEVIS PIN 3/16 X 7/8"
    Misc
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    3/16 - 1/4" SPLIT RING WITH PIGTAIL
    Misc
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    3/16-1/4" SPLIT RING
    Misc
    3/16" Split Ring - 7/16″ Diameter Murrays Part# 22-9490 Stainless steel split ring for 1/8-3/16″ diameter clevis pins. Comparable to Hobie Cat® #81503100 Small Clevis Ring. This is a super small size, best for locations where you may be concerned about it snagging on something. The small size helps prevent it from snagging on lines, sheets, sails and clothing.
    3/16" SPLIT RING
    Misc
    Roller Furler Drum Ball Bearing Murrays Part# 50-61670000 Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.
    HOBIE ROLLER FURLER BEARING
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Recently viewed