Hobie 14 Rudder Parts

59 products

    Parts for your Hobie 14 Rudder and Steering System

    59 products
    HOBIE EPO3 RUDDER BLADE
    Hobie
    H14/16 Rudder Casting Upper Left Black Murrays Part# 50-10352011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H-14/16 UPPER LEFT RUDDER CASTING-BLACK
    Hobie
    H14/16 Rudder Cast Upper Right Black Murrays Part# 50-10362011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H14/16 UPPER RIGHT RUDDER CASTING-BLACK
    Hobie
    Out of Stock
    H16 Adjustable Lower Rudder Casting Murrays Part# 50-10412011 Black adjustable lower rudder casting for Hobie® 16 is a factory replacement part. Includes rudder cam. This is the standard lower casting on Hobie 16 beachcats since 1983. There is an adjustable screw at the base of the casting to help adjust rudder rake and a slightly different casting shape than the earlier rudder castings. The spring length is also longer on these than pre '83 castings.
    H-16 ADJUSTABLE LOWER RUDDER CASTING
    Hobie
    Out of Stock
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    Out of Stock
    Fiberglass Tiller H14/16 Murrays Part# 50-20550001 84" Hobie Fiberglass Tiller Extension The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.
    FIBERGLASS TILLER H14/16
    Hobie
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    Out of Stock
    H14 Tiller Crossbar-Black Murrays Part# 50-10520011 Tiller crossbar for Hobie 14. Hobie Part# 10520011
    H-14 TILLER CROSSBAR-BLACK
    Hobie
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    Murrays 84" Fiberglass Tiller Extension
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    MURRAYS H-16 ONE PIECE RUDDER GUDGEON
    Murrays Sports
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    Murrays Part# 001-2050 The Hobie Rudder Cam Kit: Hobie 14, Hobie 16 are replacement rudder cams to keep the rudder lock-down mechanism on your Hobie Cat® functioning properly. The Hobie® 14 or 16 kit includes two cams, two reusable, internally threaded sister screws for both sides, and instructions. Purchase the complete kit if your boat has the stock flare pins; purchase just the cams (#50-10480000 each) if your boat already has sister screws.  Compare to Hobie Cat® #5202.
    H-14/16 RUDDER CAM KIT
    Murrays Sports
    H14 Straight Tiller Arm-Black Murrays Part# 50-10382010 Hobie® factory replacement black straight tiller arm for Hobie® 14. Hobie Part# 10382010
    H-14 STRAIGHT TILLER ARM-BLACK
    Hobie
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    RUDDER PINS W/BUSHINGS H14/16 Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings. Hobie part numbers: 20880001 and 8062001
    H-14/16 RUDDER PINS WITH BUSHINGS
    Murrays Sports
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    H14/16/17/18 LOWER GUDGEON
    Murrays Sports
    RUDDER PINS H14/16 Stainless Steel Murrays Part# 001-2269 Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. Includes one pair of 3/8" x 8" rudder pins with cotter pins. These rudder pins are sold as a pair, whereas Hobie Cat® sells theirs individually as item #20880011. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and
    H-14/16 RUDDER PINS PR (SS)
    Murrays Sports
    RUDDER LOCKING KIT Hobie 16 Murrays Part# 50-10311900 Hobie factory rudder locking kit for Hobie 14 or 16 includes one each plunger, 2-1/2" spring (#50-10432000), and Delrin screw. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H14/16 RUDDER LOCKING KIT
    Hobie
    H14/16 Aluminum Rudder Pins Murrays Part# 001-2272 Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs
    H-14/16 ALUMINUM RUDDER PINS
    Murrays Sports
    Rudder Cam Sister Screws: H14/16 Murrays Part# 001-2051 The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Hobie Cat item #10470000.  Hobie part number #5201. Sold in pairs
    H-14/16 RUDDER CAM SISTER SCREWS
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    Hobie Tiller Extension Hinge Murrays Part# 50-10532010 Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers. Hobie Part Number: 10532010
    HOBIE TILLER EXTENSION HINGE
    Hobie
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM
    Hobie
    Rudder Return Kit for H14/16-Inter Murrays Part# 012-2049 This Rudder Return Kit for H14/16-Inter by Tren Tec eliminates kick-up. Rudders return to down position easily with one hand and tension holds rudder down if a cam fails. Accommodates both rudders. Use this page to order product numbers 12-2049 (for Hobie® 14/16/Inter; Hobie Cat® item #1544)) and 12-2059 (for Hobie 17/18/21)
    H-14/16 INTER RUDDER RETURN KIT
    Tren-Tec
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    KISME KLEET (4)
    Misc
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Murrays Sports
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW
    Hobie
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    Rudder Casting Plunger H14/16 Murrays Part# 50-10440000 Hobie® factory replacement rudder casting plunger for Hobie® 14 or 16.
    H-14/16 RUDDER CASTING PLUNGER
    Hobie
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    SCREW DELRIN 3/8-16 X .75"
    Hobie
    Hobie rudder bushing. Hobie part number 8062001
    RUDDER TITE BUSHING EACH
    Murrays Sports