Murrays Marine - Catamaran specialists

All

3188 products
    All available products.
    3188 products
    Bolt Hex Head 8mmX1-1/8 Stainless Steel Murrays Part#19-2210 Stainless steel hex head bolt measures 8mm x 1-1/8"
    BOLT HEX HEAD 8mm 1-1/8" (SS)
    Misc
    Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel) Murrays Part# 19-2237 Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut. This bolt is a replacement for item #56-F110 Comparable to Hobie Part# 8040211
    BOLT HEX HEAD 5/16-18 X 4.50" SS
    Misc
    Bolt Hex Head 5/16-18 X 3.75 Stainless Steel Murrays Part# 19-2235 Stainless steel 5/16-18 x 3-3/4" hex head bolt Equivalent to Hobie Cat® item #8040381
    BOLT HEX HEAD 5/16-18 X 3.75" SS
    Misc
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Bolt Hex Head 5/16-18 X 2.25 (Stainless Steel) Murrays Part#19-2230 Stainless steel hex head bolt measures 5/16-18 x 2-1/4"
    BOLT HEX HEAD 5/16-18 X 2.25" SS
    Misc
    Bolt Hex Head 3/8-16 X 2.5" (Stainless Steel) Murrays Part# 19-2239 Stainless hex head bolt is used on Nacra and Prindle crossbar.
    BOLT HEX HEAD 3/8-16 X 2.5" (SS)
    Misc
    Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel) Murrays Part# 19-2227 Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040)
    BOLT HEX HEAD 1/4-20 X 4.5" (SS)
    Misc
    Bolt Hex Head 1/4-20 X 5" (Stainless Steel) Murrays Part# 19-2226 Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut. Equivalent to Hobie® Part# 8040111
    BOLT HEX HEAD 1/4-20 X 5" (SS)
    Misc
    Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    Bolt Hex Head 1/4-20 X 2.25 Stainless Steel Murrays Part# 19-2221 Prindle 16/18 and Hobie® rudder bolt. Stainless steel 1/4-20 x 2-1/4" hex head bolt.
    BOLT HEX HEAD 1/4-20 X 2.25" (SS)
    Misc
    Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel) Murrays Part# 19-2240 Stainless steel hex head bolt for older Hobie® 16 pylon. Compare to Hobie® Part#50-8040731
    BOLT HEX HEAD 1/2-13 X 3.75" (SS)
    Misc
    BIG FOOT 6-WHEEL HD PWC CART W/COUPLER 2"
    BigFoot
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Batten Tensioner Murrays Part# 007-1528 This great idea from Europe gives precision adjustment when tensioning battens. The screw thread adjuster allows as fine an adjustment as you want. It clips to the sail at the batten tie strip grommets and pushes against the end of the batten. No batten cap is required. Hobie Cat® Part# 1528
    BATTEN TENSIONER
    Bainbridge
    H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10
    H-18 ANGLED LUFF BATTEN CAPS
    Tren-Tec
    H14 Angled Luff Caps Murrays Part# 012-2006 No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1561 Sold in packages of 6
    H-14 ANGLED LUFF CAPS (6)
    Tren-Tec
    H18 Main Adjustable Batten Leech Caps Murrays Part# 012-4003 No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Hobie Part# 1523 Sold in packages of 10
    H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10)
    Tren-Tec
    1" FOAM MAIN SAIL BATTEN CAP SET OF 10 Murrays Part# 012-8003 Glue this end cap onto any solid epoxy or foam main sail batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly. Leech caps are for the trailing edge of the sail. TrenTec part number FB-10
    ADJUSTABLE MAIN BATTEN LEECH CAPS 1" (10)
    Tren-Tec
    H14/17 Adjustable Batten Leech Caps Murrays Part# 012-2003 No more knots at the trailing edge. Adjust Hobie® 14 or Hobie® 17 sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line Hobie Part# 1521 Sold in packages of 6
    H-14/17 ADJUSTABLE BATTEN LEECH CAPS (6)
    Tren-Tec
    3/4" ADJUSTABLE FOAM LEECH CAPS (10)
    Tren-Tec
    LEECH CAP: 1" FOAM MAIN EACH Glue this end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly. TrenTec part number FB-10
    FOAM MAIN SAIL BATTEN CAP 1"
    Tren-Tec
    Batten Cap Leech Adjustable Foam 3/4" Murrays Part# 012-4080-1 Glue this adjustable 3/4" x 5/16" end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Sold individually
    3/4" ADJUSTABLE FOAM BATTEN CAP (EA)
    Tren-Tec
    This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam extrusion for use with a 3-hole swivel cleat. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing.
    BASE PAD UNIVERSAL 3-HOLE KIT
    Murrays Sports
    Base Pad: Flat 3-Hole Murrays Part# 25-3001 Use to mount a swivel cam to any flat surface. This adapter is not necessary when using Hobie's Offset Base Pad #07-1162.
    BASE PAD: FLAT 3-HOLE
    Ronstan
    Out of Stock
    PAD NACRA 4-HOLE (PORT)
    Murrays Sports
    CAT TRAX AXLE EXTENDER H-21 AND TORNADO
    Cat Trax
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    WELDED STAINLESS STEEL RING 3/16"x3/4"
    Misc