Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Lock Nut 1/4 X 28 Murrays Part# 002-1047-1 Tubular turnbuckle lock nut. Right hand thread.
    LOCK NUT 5/16X24 RH
    Misc
    Lido 14 Shroud 3/32" White Wire Murrays Part# 002-5103-91 Single white shroud for Lido 14 is constructed to factory length.
    LIDO 14 SHROUD 3/32" WHITE WIRE
    Murrays Sports
    Large Fairlead: 1-7/16 X 5/8" Murrays Part# 25-1065 Large stainless steel fairlead is used on Hobie® rear crossbar. Measurements: A = 1-7/16" (36.5mm) B = 5/8" (16mm) C = 3/16" (5mm) Use two 6-4 rivets (#19-5031) for installation.
    LARGE FAIRLEAD: 1-7/16 X 5/8"
    Ronstan
    Lido 14 Forestay 3/32" White Murrays Part# 002-5143-91 Forestay for Lido 14 is constructed of 3/32" white-coated wire to factory specifications.
    LIDO 14 FORESTAY 3/32" WHITE WIRE
    Murrays Sports
    Kisme "OK" Car Only Murrays Part# 005-0400 H16 Jib car upgrade kit. Stainless construction with remote traveler control attachment points and low profile jib sheet becket attachment. Purchase the H16 Traveler control kit to upgrade your vintage jib car and sheeting system. Sold Individually
    OXEN BLOCK "OK" CAR ONLY (EA)
    Oxen
    Jib Traveler Cars Integrated Murrays Part# 012-3021 These cars by Tren Tec fit Hobie's integrated jib track which is extruded into the crossbar, as opposed to the external track which is riveted to the crossbar (standard on pre-1997 Hobie® 16's). The black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. Hobie Cat® uses #1553 for this item Sold as a pair
    JIB TRAVELER CARS INTEGRATED
    Tren-Tec
    Inter F17 Diamond Wire without Turnbuckle Murrays Part# 002-5294-20 Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.
    INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    NACRA INTER 18 JIB HALYARD
    Murrays Sports
    Inter 18 Diamond Wire without Turnbuckle Murrays Part# 002-5394-20 Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides.
    NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    Nacra Inter 18 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140
    NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4)
    Murrays Sports
    Hook 4-Roller All Metal Murrays Part# 27-5729 All-metal block features cast aluminum hook and body with stainless steel roller and shaft. Strong!
    HOOK 4-ROLLER ALL METAL
    Misc
    HOOK 3-ROLLER ALL METAL
    Misc
    HOBIE CROAKIES GLASSES RETAINERS
    Hobie
    Harken Standard X-Treme Angle Fairlead Murrays Part# 28-0150 The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. fits #28-0468 Micro Cam-Matic Aluminum and 28-0471 Micro Carbo Cam. Specifications: 7/8" height above cam; 1-7/16" high; 1-5/16" long; 2" wide; weighs 1 oz.; 1-1/16" fastener spacing. Harken Part# 375
    HARKEN STANDARD X-TREME ANGLE FAIRLEAD
    Harken
    HARKEN 22MM END STOPS HIGH-BEAM
    Harken
    Harken 22mm Low-Load Loop Car Murrays Part# 28-2732 Harken's small boat CB jib car for Ti-lite is 2-7/8" long and 2-1/4" wide. The card body height is 15/16"; weighs 4 oz.; 500 lb. maximum working load; 2500 lb. breaking load. Note: This track is compatible only with Harken low-profile traveler cars (#28-2732, #28-2736 and #28-2738). Harken Part# 2732
    HARKEN 22MM LOW-LOAD LOOP CAR
    Harken
    Harken 22mm High-Load 1250 Car-Fixed Sheaves, Eyestrap Murrays Part# 28-2736 Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit.
    HARKEN 22MM HIGH-LOAD 1250 CAR-FIXED SHEAVES, EYESTRAP
    Harken
    Harken Fairlead Spacer F18 Murrays Part# 28-4022 Mounted on a mainsheet base block, this plastic spacer provides a smooth surface to guide the line for the fairlead. Sold individually
    HARKEN F18 FAIRLEAD SPACER
    Harken
    Harken Standard Furling Swivel-3mm Luff Wire Murrays Part# 28-0164 One of the simplest, strongest and least expensive roller furling swivels for roller furling jibs. SWL of 950 lbs.; distance between pins is 2-1/2". Harken Part# 164
    HARKEN STANDARD FURLING SWIVEL-3MM LUFF WIRE
    Harken
    Harken Standard Furling Drum-3mm Luff Wire Murrays Part# 28-0165 Harken's high load drum features multiple stacked races of bearings to ensure smooth rotation under load.
    HARKEN STANDARD FURLING DRUM-3MM LUFF WIRE
    Harken
    Harken 29mm Wire Bullet Block-Swivel Murrays Part# 28-0183 Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.
    HARKEN 29MM WIRE BULLET BLOCK-SWIVEL
    Harken
    Harken 29mm Bullet Block - Swivel Murrays Part# 28-0166 Medium-size Harken double bullet block with swivel has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 29MM BULLET BLOCK-SWIVEL
    Harken
    Out of Stock
    Harken 38mm Big Bullet Block-Swivel Murrays Part# 28-0168 Low-friction bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Harken's big single bullet block with swivel has free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 38MM BIG BULLET BLOCK-SWIVEL
    Harken
    HARKEN 38MM BIG BULLET BLOCK-BECKET
    Harken
    Harken 29mm Wire Bullet Block Murrays Part# 28-0098 Low-friction bullet blocks lead control lines aft. This block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings, sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. This wire bullet block uses roller bearings to carry higher loads and features Hardkote-anodized Teflon®-impregnated aluminum sheaves for strength and corrosion resistance.
    HARKEN 29MM WIRE BULLET BLOCK
    Harken
    Harken 3.00" Hexaratchet® Block-Swivel, Starboard Murrays Part# 28-0009 Hexaratchets grip loaded sheets, yet allows sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 and 009 singles or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions and on/off switches face up.
    HARKEN 3.00" HEXARATCHT BLOCK-SWIVEL, STARBOARD
    Harken
    Harken Block Single 2.25" Hexaratchet Murrays Part# 28-0019 Sheave Size 57mm 2.25" Max Line Size 10mm 3/8" Max Working Load 227KG 500lb Breaking Strength 907kg 2000lb Holding Power 10:1 Hexaratchets grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions an
    HARKEN 2.25" HEXARATCHET BLOCK-SWIVEL, STARBOARD
    Harken
    Harken 22mm Block-Swivel Murrays Part# 28-0292 Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.
    HARKEN 22MM BLOCK-SWIVEL
    Harken
    Harken 29mm Double Bullet Block-Becket Murrays Part# 28-0085 Medium-size Harken double bullet block with becket has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 29MM DOUBLE BULLET BLOCK-BECKET
    Harken
    Harken Block Double with Becket 2.25" Harken PN 004 Sheave Size 57mm 2.25 Inches Max Line Size 12MM  7/16" Max Working Load 454kg  1000lb Breaking Load 1361kg 3000lb The 2.25 in (57mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats and iceboats, as well as small offshore racers and cruisers.
    HARKEN 2.25" BLOCK DOUBLE WITH BECKET
    Harken
    HARKEN 2.25" BLOCK DOUBLE
    Harken
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN CARBO STANDUP FIXED 29MM
    Harken
    Harken 40mm Quad Block Murrays Part# 28-2654 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 40MM QUAD BLOCK
    Harken
    Harken 57mm Triple Ratchamatic® Block-Swivel, Cam Cleat, 40 mm Block Murrays Part# 28-2632 The Harken Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded, the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
    HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT, 40MM BLOCK
    Harken
    Harken 7:1 Carbo Ratchamatic Base Block. Harken HSB360
    HARKEN BLOCK 7:1 CARBO RATCHAMATIC BASE
    Harken
    Harken 57mm Triple Ratchamatic Block-Swivel, Cam Cleat Murrays Part# 28-2629 The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
    Harken Hobie 16 main sheet base block
    HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT
    Harken
    Harken 57mm Triple Block-Swivel, Becket Murrays Part# 28-2605 This Carbo AirBlock® has an enormous working range, with a higher working load than standard blocks, even though it is lighter in weight! This is a fantastic option for the top block for a 7:1 mainsheet system, such as an Hobie 18 catamaran or Hobie Miracle 20 catamaran.
    HARKEN 57MM TRIPLE BLOCK-SWIVEL, BECKET
    Harken
    Harken 57mm Quad Block-Swivel Murrays Part# 28-2631 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system.
    HARKEN 57MM QUAD BLOCK-SWIVEL
    Harken
    Harken 57mm Double Ratchamatic Block-Swivel Murrays Part# 28-2634 The 57mm Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
    HARKEN 57MM DOUBLE RATCHAMATIC BLOCK-SWIVEL
    Harken
    Harken 57mm Carbo Boom Block 6-Sheave Murrays Part# 28-10925 Harken 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. This 57mm Carbo boom block has 6 sheaves. A swivel keeps the boom block aligned with your base block.
    HARKEN 57MM CARBO BOOM BLOCK 6-SHEAVE
    Harken
    Recently viewed