Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Harken 57mm 5-Sheave Block-Swivel

Murays Part# 28-2762

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 57MM 5-SHEAVE BLOCK-SWIVEL
    Harken
    $213.65
    Quick Release Pin Detent 1/4 X 1"

Murrays Part# 18-4D100


This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long.

Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QR PIN DELUXE 3/16 X 1/2"
    Murrays Sports
    $22.00
    TURNBUCKLE JAW 1/4 X 28 LH
    Misc
    $23.25
    Slingshot Pigtails
Murrays part# 54-6013
Replacement pigtails with foolproof connections help prevent wear and tear on your lark's heads. Easy to pull off, saving teeth and nails. Line/bar pigtails are pictured.
Sold in a package of 4
    SLINGSHOT PIGTAILS (BAR)
    Misc
    $16.99
    Out of Stock
    Jib Traveler Car 2005 and Newer

Hobie®'s jib traveler car for the integrated track crossbar on the Hobie® 16 adds bearings to the popular version from the 2004 Worlds. Standard equipment since late 2005, this jib traveler is constructed of Zytel, a very strong, glass-reinforced nylon that resists fatigue and impact failure. Brass traveler bearings give easier movement under load. Includes holes for anchoring traveler and traveler return lines.
    JIB TRAVLER CAR 2005 AND NEWER
    Hobie
    $0.00
    Out of Stock
    Wave Classic Mesh Trampoline-Turquoise 

Murrays Part# 50-38970058

Hobie Wave Mesh Trampoline for Wave Classic SE is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket.

Which Wave model do you have?

Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
    WAVE CLASSIC MESH TRAMPOLINE-TURQUOISE
    Hobie
    $803.99
    Wave Classic Mesh Trampoline-Black

Murrays Part# 50-38970055



Hobie Wave Mesh Trampoline for Wave Classic SE is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket.

Which Wave model do you have?

Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
    WAVE CLASSIC MESH TRAMPOLINE-BLACK
    Hobie
    $699.00
    BARZ SEALED GASKETS-BLACK
    Barz
    $5.00
    UNIVERSAL PIGTAIL-GRAY
    Misc
    $6.00
    TUFF STRUT BLADDERS-40"
    Murrays Sports
    $16.50
    Out of Stock
    NACRA CARBON TILLER EXTENTION 61-108"
    Murrays Sports
    $350.00
    Out of Stock
    Gath Full Visor Replacement

Murrays Part# 52-0003-9

Replacement visor for a Gath retractable visor helmet.  

Fits both the small and the medium sizes.

Size: Small

Color: Grey
    GATH FULL VISOR REPLACEMENT - GREY
    Gath
    $39.00
    Out of Stock
    LIQUID FORCE HAPPY FOIL WING COVER
    Liquid Force
    $27.00
    BWS PADS-STUBBY TAIL
    BWS
    $40.00
    BWS Undertow Chicken loop

Murrays Part# 54-0207

The BWS Undertow Chicken loop is a PU harness loop that will work on all The BWSurf Undertown bar and the V1 Blue Chip Bar.
    BWS UNDERTOW CHICKEN LOOP
    BWS
    $15.00
    BWS Undertow Off Switch Bungee

Murrays Part# 54-0201

The BWS Undertow Off Switch Bungee is the safety o flagging line for BWSurf Undertow bars. It is compatible with all Undertow bars. BWS factory replacement part.
    BWS UNDERTOW OFF SWITCH BUNGEE
    BWS
    $20.00
    Out of Stock
    H-14 TILLER CROSS BAR- USED
    Hobie
    $60.00
    H-16 FRONT CROSSBAR WITH CASTINGS-USED
    Hobie
    $180.00
    Out of Stock
    H-18 TOP GUN WING COVERS
    Hobie
    $625.00
    Out of Stock
    H-17 TOP GUN WING COVERS
    Hobie
    $625.00
    Out of Stock
    Wave Rear Crossbar

Murrays Part# 50-38191031

Hobie Wave Rear crossbar

Hobie Part# 38191031
    WAVE REAR CROSSBAR
    Hobie
    $479.99
    Out of Stock
    WASHER STAINLESS STEEL 4.3 STANDARD
    Murrays Sports
    $0.45
    WASHER STAINLESS STEEL 8.4 STANDARD
    Murrays Sports
    $0.20
    H-18 UPPER RIGHT RUDDER ARM-USED
    Hobie
    $45.00
    H-18 UPPER LEFT RUDDDER ARM-USED
    Hobie
    $45.00
    Out of Stock
    NACRA 450 3 PIECE TRAMPOLINE-BLACK
    Murrays Sports
    $350.00
    NACRA 15 STARBOARD TILLER ARM
    NACRA
    $75.00
    Out of Stock
    Bravo Tiller Arm

Murrays Part# 50-90382011




Replacement tiller arm for the Hobie Bravo. Original Hobie Cat hardware and standard on all Bravo sailboats. 

Hobie Part# 90382011
    BRAVO TILLER ARM
    Hobie
    $83.99
    NACRA 15 PORT TILLER ARM
    NACRA
    $75.00
    Out of Stock
    NACRA SWIFTCORD 5MM
    NACRA
    $2.00
    Out of Stock
    NACRA INTER 20 SPINNAKER (SINGLE COLOR)
    Murrays Sports
    $1,486.00
    Out of Stock
    NACRA F20C AFT SPREADER BAR
    NACRA
    $75.00
    Nacra 15 Spinnaker Tapered Halyard

Murrays Part# 56-50026

This spihalyard tapered NACRA 15 (green/white), is made out of SSR from Alpha Ropes. The spihalyard is ready to go, completed with tapering. The line gives a very soft feeling. The construction of the line is single braid, 16 strand (8x2), mix Dyneema® Sk78 / Cordura®. This line is not ready for kinking and is excellent for sheets.
    Nacra 15 Spinnaker Tapered Halyard

Murrays Part# 56-50026

This spihalyard tapered NACRA 15 (green/white), is made out of SSR from Alpha Ropes. The spihalyard is ready to go, completed with tapering. The line gives a very soft feeling. The construction of the line is single braid, 16 strand (8x2), mix Dyneema® Sk78 / Cordura®. This line is not ready for kinking and is excellent for sheets.
    NACRA 15 SPINNAKER TAPERED HALYARD
    NACRA
    $95.00
    Out of Stock
    TORQEEDO SKEG FOR CRUISE 10.0 R
    Torqeedo
    $99.00
    Ronstan Series 15 Ball Bearing Single Block with Loop Top and Becket

Murrays Part# 21-15111

This is a great little block, for weight, durability and working loads.

Features:

Smallest and lightest ball bearing block available
Precision molded acetal sheave running on stainless steel ball bearings provide high performance low friction
Single loop head blocks include an O-ring to separate running line from head lashing or fixing.
    RONSTAN SERIES 15 BALL BEARING SINGLE BLOCK WITH LOOP TOP AND BECKET
    Ronstan
    $14.95
    Out of Stock
    Screw 10-32 x 3/4 PHPMS

Murrays Part# 50-8030981



Mainsheet Bracket Screw for Hobie Bravo.
    SCREW 10-32 x 3/4" PHPMS
    Misc
    $0.41
    Out of Stock
    Screw 1/4-20 x 1-1/4" PHMS

Murrays Part# 50-8031191



Tiller Extension Hinge Screw
    SCREW 1/4-20 x 1-1/4" PHMS
    Misc
    $0.79
    Screw #10X1 PHSMS-P TF-12

Murrays Part# 50-8032121

Hobie Part# 8032121
    SCREW #10X1 PHSMS-P TF-12
    Hobie
    $0.39
    Ronstan Series 19 C-Track Composite Slide, Loop Top, Plunger Stop

Murrays Part# 21-91942




Features:
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing positions
Applications:
Dinghy and small catamaran jib sheet leads
Dinghy outhauls
    RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP, PLUNGER STOP
    Ronstan
    $84.94
    Out of Stock
    Ronstan Series19 C-Track Composite Slide, Loop Top

Murrays Part# 21-91901

The S19 C-Track Composite Slide Saddle Top-  The spring-loaded plunger stops allow fast, positive positioning of track slides. The slides are available with swiveling cleat and fairlead to suit different crewing positions.
    RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP
    Ronstan
    $24.47
    Recently viewed