Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    Sale
    MYSTIC STEALTH BAR SHORT SURF ROPE
    Murrays Sports
    Save $3.99
    Nacra 15 Spinnaker-White Murrays Part# 56-60331-02S Holmenkol Treatment
    NACRA 15 SPINNAKER-WHITE
    Murrays Sports
    Crossbar End Cap Right Rear Murrays Part# 56-3002 The Prindle crossbar end cap for the right rear cross bar on the Prindle 15, 16, 18 and Escape. Performance Sports factory item# 3002
    PRINDLE CROSSBAR RIGHT REAR END CAP
    NACRA
    BOLT 10-32X3" PAN HEAD
    Harken
    West System 410 Microlight Filler 2oz Murrays Part# 40-4107 West System 410 Microlight Fairing Filler thickens resin and makes it into a less-dense putty form that is better for making certain repairs. Add more filler to make the epoxy thicker. Use with West Systems Epoxy Resin (#40-4103). 2 oz.
    WEST SYSTEM 410 MICROLIGHT FILLER 2OZ
    West Marine
    SUNFISH DECK COVER WITH SPARS-POLY BLUE
    Murrays Sports
    Harken Cam Base-16mm Sheave and Adjustable Angle Micro Murrays Part# 28-9051 The 9051 adjustable cam swivel base with 468 Micro Cam-Matic cleat provides precise cleating. The cleating angle adjusts infinitely in a 5-17 degree range up and down for optimal line lead. The 16 mm sheaves feature low-friction stainless steel ball bearings to handle high loads, ideal for controls where cleating angles change dramatically.
    HARKEN CAM BASE - 16MM SHEAVE ADJUSTABLE ANGLE MICRO
    Harken
    Harken 40mm Double Block Ratchet Murrays Part# 28-HSB411 Commonly used in our 4:1 race mainsheet system for a Hobie Wave upgrade. Features a single manual ratchet switch on one of the sheaves to provide a bit of extra purchase.
    HARKEN 40MM DOUBLE BLOCK RATCHET
    Harken
    Welded "S" Hook Murrays Part# 56-9650 ​Welded stainless “S” hook for all older Nacras. Performance Sports factory item# 9650
    WELDED "S" HOOK
    Murrays Sports
    Mast Float Bearing Murrays Part# 50-36600031
    MAST FLOAT BEARING
    Hobie
    Out of Stock
    Ronstan Series 15BB Block, Stand-up Loop Features: Smallest and lightest ball bearing block available Precision molded acetal sheave running on stainless steel ball bearings provide high performance
    RONSTAN SERIES 15BB BLOCK, STAND UP LOOP
    Ronstan
    Out of Stock
    Nacra NF20C Race Snufferbag Murrays Part# 56-31238 This race snufferbag can be used on the Nacra 460, 500, NACRA15 and also on the F16. The sufferbag race comes with some advantages compared to the standard black. The polyester laminate gives structure to the material resulting in more balance during sailing because the snufferbag keeps it shape. The fabric prevents water from absorbing into snufferbag. This make the snufferbag and spinnaker lighter, what results in easier hosting of the spinnaker.
    NACRA NF20C RACE SNUFFERBAG
    NACRA
    Sale
    BWS PADS-SKINNY TAIL
    BWS
    Save $30
    O’Pen Skiff Tiller Clam Cleat Murrays Part# 65-31650 Package of 10 O’Pen Skiff Tiller Clam Cleat
    O'PEN SKIFF TILLER CLAM CLEAT (PK 10) (Discontinued)
    Tahe Outdoors
    WMFG FRONT FOOT KITEBOARD TRACTION PAD
    WMFG
    Murrays Part# 001-0156-1 The Dakine T-Series Windsurf Spreader Bar is a non-corrosive, marine grade stainless steel windsurfing spreader bar by DaKine. The T-series bar is for use with DaKine Posi-Lock harnesses (Such as the NRG and Thermo Form series T4, T5, T6, T7 and T8 Classic) and is also compatible with 2012 and older Dakine harnesses with the Power Clip buckle system.; The easy way to tell if this is the right spreader for your windsurfing harness, is if your harness is if it has clips on both
    DAKINE T-SERIES WINDSURF SPREADER BAR
    Dakine
    BWS Pad- Skinny Tail Pad Murrays Part# 54-0092BD Color: Blue  Traction Design: Diamond   BWS Pad- Tail Pad Skinny The BWSurf Pad - Tail Pad Skinny. Used with legendary 3M backing and 5mm EVA on the top these pads aren’t going anywhere. And neither are your feet.
    BWS PAD-SKINNY TAIL
    BWS
    CORNER CASTING RIGHT FRONT-BLACK
    Hobie
    AQUAPAC KEYMASTER CASE 608
    Aquapac
    Front Crossbar End Cap Murrays Part# 56-2902 The Prindle Front Crossbar End Cap is for the front crossbar of all Prindles fits both right and left sides. Please specify silver or black and we will do our best to accommodate your selection Nacra Sailing factory item# 30394
    PRINDLE FRONT CROSSBAR END CAP
    NACRA
    Nacra Cheek Block 16mm-Harken Murrays Part# 56-30652 The 16 mm is Harken?s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Mostly used on bowsprits.
    NACRA CHEECK BLOCK 16MM-HARKEN
    NACRA
    Chain 3/16" Murrays Part# 002-6051-1 Use chain as a counter weight to keep a racing mark upright. This 3/16" PC proof coil (PC) chain has a 750lb. SWL, 3000 lb. breaking strength, and weighs 0.39lb./ft. The chain is hot-dip galvanized, which is superior to zinc electroplating. Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications
    CHAIN 3/16"
    Misc
    3M Wool Polish Pad Murrays Part# 40-9015 9 inch polishing pad for automatic buffer. Great for use with 3M protectant restoration polish to clean up your chalky hull.
    3M WOOL POLISH PAD
    3M
    Out of Stock
    3M Perfect-It Compound (Heavy) Murrays Part# 40-9010 When you want to get serious about bringing back a shiny gelcoat! Bust out the automatic buffer and a wool pad, and go to town. This stuff works well to bring back a shine to your old hulls. Wet sand first, or just clean it up and go for it! Check out the blogs for some examples.
    3M PERFECT-IT COMPOUND (HEAVY)
    3M
    Harken 57mm T2™ Soft-Attach Ratchamatic Block-1.5x Grip Murrays Part# 28-2167 Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. The patented T2 Ratchamatic is Harken’s newest block to feature the T2 line’s styling and soft-attachment system.
    HARKEN 57MM T2 SOFT-ATTACH RATCHAMATIC BLOCK-1.5 GRIP
    Harken
    Rudder Pin Wild Cat Murrays Part# 50-F18780330
    WILD CAT RUDDER PIN
    Hobie
    O'pen Skiff Daggerboard Murrays Part# 65-31785 ​O’pen Skiff Daggerboard replacement. Tahe Part# 31785
    O'PEN SKIFF DAGGERBOARD
    Tahe Outdoors
    Nacra Rudder Hold Down Murrays Part# 56-30002 This part secures the lower rudder casting to the transom of most Nacra Catamarans. The small plate on both sterns which secures your lower rudder casting on the gudgeons, without it your rudders won't stay on all right. Nacra Part# 30002
    NACRA RUDDER HOLD DOWN
    NACRA
    Dynabar Line Bushing Murrays Part# 001-0223 The Dynabar Line Bushings are used to protect the sliding rope and the auto center bungie from wear and tear when inserted in the sliding spreader bar. Sold Individually.
    DYNABAR LINE BUSHING
    Misc
    DYNABAR FREERIDE SLIDER BAR
    Misc
    Out of Stock
    EPO2 HOBIE CARBON RUDDER BLADE
    Hobie
    Sale
    A Gravity foil is an intuitive foil to use. It generates lift at low (and even very low) speed but does it a smooth way so you can keep your balance easily. The wings are designed to be easy to roll and turn, so they can perform in the surf. ​The range includes 4 sizes from 1200 to 2200 cm². Foils with more area such as the 1800 and 2200 provide more lift, but we made sure they also come with more aspect ratio to maintain the glide and avoid unnecessary drag. Their shape provide great stability
    F-ONE 1500 CARBON GRAVITY FRONT WING T1
    F-One
    Save $564
    Out of Stock
    H-14/WAVE EUROPEAN MAST BASE
    Hobie
    Harken 40mm Triple Ratchet Block — Swivel, Cam Cleat Murrays Part# 28-2612 Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
    HARKEN 40MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
    Harken
    Sale
    Dakine Hammerhead Kite Spreader Bar 10" Murrays Part# 001-0158 Dakine's ergonomically-shaped Hammerhead Kite Spreader Bar features a short, hammer-shaped hook for control and a crossbar for hold-down webbing strap. Constructed of marine-grade, non-corrosive stainless steel. *For use with a 2020 Dakine harness requires a Dakine Power Clip Buckle for quicker set up and disconnecting*
    DAKINE HAMMERHEAD KITE SPREADER BAR
    Dakine
    Save $15
    Rooster Quick Dry Poncho Murrays Part# 48-133233 The Rooster Quick Dry Poncho is small enough to fit neatly into the smallest space left in your kit bag, tucking neatly into its hood. Its microfiber construction has an amazing quick-dry drying ability and its thickness ensures that it dries fast in normal conditions to ensure you have an odor free Poncho for longer.
    ROOSTER QUICK DRY PONCHO
    Rooster
    European Tiller Crossbar Violon Screw Murrays Part# 51-99221301 Designed for use with The French Hobie tiller. Compatible with 19-2522 8mm Nylock nut. Not compatible with shroud anchor bars.
    EUROPEAN TILLER CROSSBAR VIOLON SCREW
    Hobie
    HARKEN 57MM T2 LOOP SOFT-ATTACH BLOCK
    Harken
    Harken 57mm Carbo Side Cover Murrays Part# 28-26521B One Harken replacement right or left 57mm side cover washer for #28-2629 Carbo Ratchamatic base block. #28-2652 Right cam arm washer 57mm is Harken #H-26521B. #28-2653 Left cam arm cover 57mm with nut is Harken #HSB524.
    HARKEN 57MM CARBO SIDE COVER
    Harken
    Harken 16mm Cheek Pivot Block Murrays Part# 28-0432 The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb. (113 kg) maximum working load.
    HARKEN 16MM CHEEK PIVOT BLOCK
    Harken
    Recently viewed