All Sailing Parts

2215 products

    Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

    2215 products
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    PRINDLE GOOSNECK BASE FITTING
    NACRA
    Bolt Plate Murrays Part# 56-2008 Bolt plate for dolphin striker fits Prindle 15, 16, 18, Escape, 18-2, 19, 19MX. Nacra Sailing factory item #30043
    PRINDLE/ESCAPE BOLT PLATE
    NACRA
    Mast Head Casting Murrays Part# 56-6502 Factory replacement mast head casting for Prindle 15 Catamaran
    PRINDLE MAST HEAD CASTING
    NACRA
    Out of Stock
    H20 3/16 Jib Swivel Pin Murrays Part# 50-41890001 Hobie® factory replacement pin swivel for Hobie® 20 jib.
    H-20 3/16" JIB SWIVEL PIN
    Hobie
    Out of Stock
    OUTHAUL BEARING PIN
    Hobie
    Out of Stock
    NYLINER 3/8"
    Hobie
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    H21 Nut Jam Murrays Part# 50-8050151 Hobie® factory replacement 5/8"-18 jam nut for Hobie® 21. Hobie Part# 8050151
    H-21 NUT JAM
    Hobie
    Nut Jam 9/16-18 Low Profile Murrays Part# 50-8050461 Hobie® factory replacement low-profile 9/16-18 jam nut is used on Hobie 17 dolphin striker. Hobie Part# 8050461
    NUT JAM 9/16-18" LOW PROFILE
    Hobie
    Nut 12-24 Nylock Hex Murrays Part# 50-8050421 Hobie® factory replacement 12-24 nylock hex nut is used on Hobie 20 Miracle rudder gudgeon. Hobie Part# 8050421
    NUT 12-24 NYLOCK HEX
    Hobie
    Out of Stock
    H14/Wave Mast Step Murrays Part# 50-10170011 Mast step for Hobie 14 (without threaded post) and Wave (96 and older). Hobie® factory replacement part. If you have a H14 with threaded post order #50-20200011 (see below). Requires four 6-6 rivets (item #19-5032).
    H-14/WAVE MAST STEP
    Hobie
    Out of Stock
    GETAWAY LOWER MAST
    Hobie
    Out of Stock
    H17/18 Mast Foam Plug Murrays Part# 50-60060000 Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.
    H-17/18 MAST FOAM PLUG
    Hobie
    H-16 MAST ASSEMBLY WITH COMP TIP
    Hobie
    Out of Stock
    H-20 MAST ASSEMBLY
    Hobie
    Out of Stock
    hobie-18-mast-60610010
    H-18 MAST ASSEMBLY
    Hobie
    Main Traveler Track (Deep) Murrays Part# 50-50252021 This Hobie® factory replacement deep traveler track for Hobie® 17 can also be cut to fit Hobie 14 or 16. Use 18 #19-5024 6-6 countersunk rivets for installation on Hobie 17.
    MAIN TRAVELER TRACK (DEEP)
    Hobie
    Out of Stock
    H18/20 Updated Luff Track 12.5" Murrays Part# 50-50404101 Hobie® factory aluminum luff track update is 12-1/2" long The Hobie 20 need the extra strength to prevent the sail from pulling out of the luff track. The Hobie 18 uses this as an extension to the wave luff track, the extra strength is great but was not stock on the boat.
    H-18/20 UPDATED LUFF TRACK 12.5"
    Hobie
    Out of Stock
    H17 Updated Luff Track 14.8 Murrays Part# 50-50404111 Factory luff track update for Hobie® 17 measures 14.8" long.
    H-17 UPDATED LUFF TRACK
    Hobie
    Out of Stock
    H14 Roller Furling Jib Sail (White) Murrays Part# 30-5012 A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
    Wave Jib Sail (White) Murrays Part# 30-6004 The Hobie Wave Jib Sail - 5oz is an aftermarket 5-oz. Dacron jib sail for Hobie Wave is patterned after the factory sail. The base price is for white, but the jib is also available in a variety of colors for an additional charge. This sail is not Class legal for racing. The Hobie Wave Jib is an aftermarket add on and will require some extra rigging to install. They do not have battens and can be set up with a roller furling system.
    WAVE JIB SAIL (WHITE)
    Hobie
    Out of Stock
    Wave Jib Sail (White) Murrays Part# 50-38992010 White jib for the Hobie Wave catamaran. White 6 oz heavy duty Dacron sailcloth 25 square foot sail area
    WAVE JIB SAIL (WHITE)
    Hobie
    FIBER TENDON SCREW
    Misc
    Out of Stock
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    Out of Stock
    Getaway Aft Crossbar End Cap Murrays Part# 50-37201021 Hobie® factory replacement rear crossbar casting end cap for Hobie® Getaway.
    GETAWAY AFT CROSSBAR END CAP
    Hobie
    Out of Stock
    H20 Jib Hinge Cover Plate Murrays Part# 50-41162001 Hobie® factory replacement hinge cover plate for Hobie 20 jib.
    H-20 JIB HINGE COVER PLATE
    Hobie
    Out of Stock
    HIKING STRAP W/ RIVET PLATES Murray Part# 50-40970001 Hobie® factory hiking strap set for Hobie® 20 includes rivets and plates
    H-20 HIKING STRAPS
    Hobie
    Out of Stock
    H20 Comtip Murrays Part# 50-40401210 Hobie® factory replacement Hobie 20 CompTip. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-20 COMPTIP
    Hobie
    Out of Stock
    H18/20 Comptip Mast Head Murrays Part# 50-60602041 Hobie 18/20 Comp Tip Mast Head factory replacement mast head for Hobie® 18 or 20 with Comp Tip.
    H-18/20 COMPTIP MAST HEAD
    Hobie
    H18 Dolphin Striker Rod Murrays Part# 50-61170001 Hobie® factory replacement dolphin striker rod for Hobie 18.
    H-18 DOLPHIN STRIKER ROD
    Hobie
    Out of Stock
    H-18 FRONT CROSSBAR INBOARD SUPPORT CASTING KIT
    Hobie
    Out of Stock
    H18 Crossbar Casting Rear Left Black Murrays Part# 50-60210011 Hobie® factory replacement left rear crossbar casting for Hobie® 18
    H-18 CROSSBAR CASTING REAR LEFT-BLACK
    Hobie
    Out of Stock
    H18 Crossbar Casting Right Rear-Black Murrays Part# 50-60200011 Hobie® factory replacement right rear crossbar casting for Hobie® 18
    H-18 CROSSBAR CASTING RIGHT REAR-BLACK
    Hobie
    Out of Stock
    H18 Boom Assembly-Black Murrays Part# 50-60720011 Hobie® factory replacement part: The black Hobie 18 boom assembly includes all integrated accessories pictured. Main sheet block hangers, out haul cleat, outhaul traveler, mast rotation cleat, endcaps and gooseneck pin. Hobie Part#60720011
    H-18 BOOM ASSEMBLY-BLACK
    Hobie
    Out of Stock
    H17 Comptip Assembly Murrays Part# 50-50611101 Hobie® factory replacement CompTip assembly for Hobie 17
    H-17 COMP-TIP ASSEBLY
    Hobie
    Out of Stock
    H17 Aft Crossbar Extrusion Murrays Part# 50-50261001 Hobie® factory replacement aft crossbar extrusion for Hobie 17.
    H-17 AFT CROSSBAR EXTRUSION
    Hobie
    Out of Stock
    H16 Vinyl Trampoline-White Murrays Part# 50-20970000 Hobie 16 White Vinyl Trampoline is less expensive than mesh and offers spray protection, so you stay warmer on cool, choppy days. Hobie Cat makes vinyl tramps only in white; colors are available only in mesh. Class legal for Hobie racing.
    H-16 VINYL TRAMPOLINE-WHITE
    Hobie
    Out of Stock
    H14/16 Mast Step-Black Murrays Part# 50-20200011 This is a factory Hobie 14*/16 Mast Step Black replacement. For Hobie 14s and Hobie 16s.  This is the post 2004 version. The first hardware change was in the early 80s. The mast step was angled further back and the mast base was adjusted to match. If you are replacing an original pre-1980 mast step you will need new rigging to accommodate the increased mast rake.
    H-14/16 MAST STEP-BLACK
    Hobie
    Out of Stock
    H14 Front Crossbar Murrays Part# 50-10131910 Hobie 14 Front Crossbar without casting
    H-14 FRONT CROSSBAR
    Hobie
    Rear Hex Bolt 5/16 X 5.75" Outboard Bolt Murrays Part# 56-F141 5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar. Performance Sports Factory item# F141
    PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT
    NACRA
    Hex Bolt5/16 X 4.25" Murrays Part# 56-F104 Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
    PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"
    NACRA
    Recently viewed