All Prindle 19 Parts

116 products

    116 products
    Getaway Mainsail (White) Murrays Part# 30-6005
    PRINDLE 19 6OZ DACRON JIB SAIL (WHITE)
    Murrays Sports
    CATAMARAN BOAT YARD COVER
    Misc
    PRINDLE 18.2/19 CENTERBOARD
    NACRA
    PRINDLE 18.2/19 MESH TRAMPOLINE-BLACK
    Murrays Sports
    Harken 57mm Carbo 8:1 System Murrays Part# 28-81 Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
    HARKEN 57mm CARBO 8:1 SYSTEM
    Harken
    Harken 57mm Carbo Ratchamatic 7:1 Low-Profile Mainsheet System Murrays Part# 28-71 The Harken 7:1 Mainsheet System includes a 57mm Triple Carbo Ratchamatic Base with 40mm Carbo single (Harken #HSB360) added on to it and a 57mm Triple with becket boom block (Harken #2605) By adding the 40mm Carbo single to the base block we have turned this into a low profile 7:1 Mainsheet system. line is not included. Safe working load is 1500 pounds; breaking strength is 3750 pounds.
    HARKEN 57MM CARBO RATCHAMATIC 7:1 LOW-PROFILE MAINSHEET SYSTEM
    Harken
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    P18-2/19 Round Tip Rudder Blade Murrays Part# 56-4225 This is the newer blade with the rounded tip as pictured.
    P18.2/19 ROUND TIP RUDDER BLADE
    Murrays Sports
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Right Rudder Casting Murrays Part# 56-4005 ​Right rudder casting for all Prindles does not include hardware. Nacra Sailing factory item# 30413
    PRINDLE RIGHT RUDDER CASTING
    Murrays Sports
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16, wave
    ECONOMY BOAT COVER
    Murrays Sports
    Out of Stock
    Rudder Casting Only Left Prindle Murrays Part# 56-4001 Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining. Nacra Part# 30412
    PRINDLE LEFT RUDDER CASTING
    Misc
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Out of Stock
    Prindle 15/16/18 mast step casting
    PRINDLE 15/16/18 MAST STEP CASTING
    Misc
    Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
    Ronstan
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    Prindle 19 Trapeze Wires - Prindle Part Number 9873
    PRINDLE 19 DOUBLE TRAPEZE (4)
    Murrays Sports
    Out of Stock
    Prindle 19 Diamond Wire with Turnbuckle Murrays Part# 002-2494-20 Diamond wire with turnbuckle for Prindle 19 is constructed to factory specifications. Prindle part# 9879
    PRINDLE 19 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    PRINDLE DOLPHIN STRIKER ROD 12.25" Nacra Sailing factory dolphin striker rod for Prindle 18-2 and 19. This extra long rod measures 12-1/4" long, as needed for some replacements.
    PRINDLE DOLPHIN STRIKER ROD 12.25"
    NACRA
    Out of Stock
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-17/18/PRINDLE HAWAIIAN CATAMERAN RIGHTING SYSTEM
    Murrays Sports
    Prindle 19 Forestay 5/32" Black Wire with Turnbuckle Murrays Part# 002-2445-42 Forestay with turnbuckle for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE
    Murrays Sports
    PRINDLE DOLPHIN STRIKER ROD 11.25"* The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.
    PRINDLE DOLPHIN STRIKER ROD 11.25"
    NACRA
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
    PRINDLE SPARE PARTS KIT
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA KIT
    Murrays Sports
    P19 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-2405-12 Single black shroud (sidestay) for Prindle 19 is hydraulically swaged for a cleaner, stronger shroud. Constructed to factory specifications.
    PRINDLE 19 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    Telo-Cat Bridle Vane; Murrays Part# 008-1450 Designed especially to take the abuse of catamaran sailing, the Telo-Cat is durable and highly visible. It installs on the headstay bridle in seconds and is easily removed for trailering with no tools required. It comes complete with 8" vane, adjustable tacking arms and mounting hardware to fit most catamarans. The Telo-Cat is made of high-impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing syst
    TELO-CAT BRIDLE VANE
    Davis
    Mast Head Casting Murrays Part# 56-6902 Mast head casting for Prindle 18-2 and 19. Nacra Sailing factory item# 30459
    PRINDLE MAST HEAD CASTING
    NACRA
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Prindle bridle wire
    PRINDLE 19 BRIDLE 5/32 BK
    Murrays Sports
    PRINDLE MAST BASE CASTING
    NACRA
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    PRINDLE GOOSNECK BASE FITTING
    NACRA
    PRINDLE RUDDER REFRESH KIT
    Murrays Sports
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Out of Stock
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    Main Halyard Hook Murrays Part# 56-6812 Main halyard lock (hook) or all Prindles and older Nacras. Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    P18/18.2/19 Mast Hound Murrays Part# 56-6806 Mast Hound for P18, 18-2 and P19 Prindle Part# 6806
    PRINDLE 18/18.2/19 MAST HOUND
    NACRA
    Out of Stock
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Recently viewed