All Prindle 18-2 Parts

All Prindle 18-2 Parts

132 products
    132 products
    PRINDLE 18.2/19 CENTERBOARD
    NACRA
    PRINDLE 18.2/19 MESH TRAMPOLINE-BLACK
    Murrays Sports
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    P18-2/19 Round Tip Rudder Blade Murrays Part# 56-4225 This is the newer blade with the rounded tip as pictured.
    P18.2/19 ROUND TIP RUDDER BLADE
    Murrays Sports
    Powerstick_carbon Hobie tiller extension
    Powerstick carbon tiller extension - Hobie, Nacra, Prindle, Dart, G-Cat, Sol Cat
    POWERSTICK TELESCOPING CARBON TILLER EXTENSION 62-115" - YOKE
    Murrays Sports
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Right Rudder Casting Murrays Part# 56-4005 ​Right rudder casting for all Prindles does not include hardware. Nacra Sailing factory item# 30413
    PRINDLE RIGHT RUDDER CASTING
    Murrays Sports
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16, wave
    ECONOMY BOAT COVER
    Murrays Sports
    Out of Stock
    Rudder Casting Only Left Prindle Murrays Part# 56-4001 Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining. Nacra Part# 30412
    PRINDLE LEFT RUDDER CASTING
    Misc
    Rear Mast Support with "V" Murrays Part# 13-3002
    REAR MAST SUPPORT WITH "V"
    Murrays Sports
    Harken 57mm Quad Block-Swivel Murrays Part# 28-2631 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system.
    HARKEN 57MM QUAD BLOCK-SWIVEL
    Harken
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Prindle diamond wire
    PRINDLE 18/18.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension. 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top Weight: 3/4 lb. Compare to Hobie 20550001
    The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension. 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top Weight: 3/4 lb. Compare to Hobie 20550001
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    Out of Stock
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Sale
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    MURRAYS DELUXE SAIL AND BOOM BAG
    Murrays Sports
    Save $50
    PRINDLE DOLPHIN STRIKER ROD 12.25" Nacra Sailing factory dolphin striker rod for Prindle 18-2 and 19. This extra long rod measures 12-1/4" long, as needed for some replacements.
    PRINDLE DOLPHIN STRIKER ROD 12.25"
    NACRA
    Prindle 18.2 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    PRINDLE 18.2 DOUBLE TRAPEZE (4)
    Murrays Sports
    Out of Stock
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-17/18/PRINDLE HAWAIIAN CATAMERAN RIGHTING SYSTEM
    Murrays Sports
    Prindle 18.2 Forestay 5/32" Black Wire with Turnbuckle Murrays Part# 002-2545-42 Forestay with turnbuckle for Prindle 18.2 is constructed to factory specifications.
    PRINDLE 18.2 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE
    Murrays Sports
    PRINDLE DOLPHIN STRIKER ROD 11.25"* The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.
    PRINDLE DOLPHIN STRIKER ROD 11.25"
    NACRA
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Traveler Car Murrays Part# 56-3010 The Prindle Traveler Car is standard equipment on all models of the latest Prindle® cats. Four durable plastic rollers ride smoothly on Prindle® traveler tracks. Two cylindrical sheaves reduce traveler control line friction. Performance Sports factory item# 3010
    PRINDLE TRAVELER CAR
    NACRA
    Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
    PRINDLE SPARE PARTS KIT
    Murrays Sports
    PRINDLE 18.2 SHROUD 5/32' BLACK WIRE ROLER SWAGED
    Murrays Sports
    Prindle 18.2/19 Jib Block Wire 4-Way Murrays Part# 002-2424-20 Four-way jib block wire for Prindle 18-2 or 19 is constructed to factory specifications.
    PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    Prindle mast base casting 6905
    Prindle Mast Base Casting Mast base casting for Prindle 18-2 and 19 Please ask about the availability of silver-anodized casting. Nacra Sailing Factory item #30460.
    PRINDLE 18.2 AND 19 MAST BASE CASTING
    NACRA
    Out of Stock
    Telo-Cat Bridle Vane; Murrays Part# 008-1450 Designed especially to take the abuse of catamaran sailing, the Telo-Cat is durable and highly visible. It installs on the headstay bridle in seconds and is easily removed for trailering with no tools required. It comes complete with 8" vane, adjustable tacking arms and mounting hardware to fit most catamarans. The Telo-Cat is made of high-impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing syst
    TELO-CAT BRIDLE VANE
    Davis
    Mast Head Casting Murrays Part# 56-6902 Mast head casting for Prindle 18-2 and 19. Nacra Sailing factory item# 30459
    PRINDLE MAST HEAD CASTING
    NACRA
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    PRINDLE 18.2 BRIDLE 5/32-BLACK
    Murrays Sports
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    NACRA - PRINDLE GOOSNECK BASE FITTING
    NACRA
    Prindle rudder parts diagram
    Prindle internal rudder components
    PRINDLE RUDDER REFRESH KIT
    Murrays Sports
    JIB CLEW BLOCK KIT
    Murrays Sports
    Spreader Bar Aft Murrays Part# 56-9843 Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components. Nacra Sailing factory item# 30335
    NACRA SPEADER BAR AFT
    NACRA
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    Hobie 3062 1/4" Bow shackle with quick release pin
    QUICK RELEASE 1/4" BOW SHACKLE
    Murrays Sports
    Out of Stock
    N5.5/5.8/P18.2 Jib Track 18" Murrays Part# 56-1910 Nacra Jib Track 18" Standard on Nacra 5.5SL, 5.7, and 5.8 as well as Prindle 18-2 and 19.
    NACRA 5.5/5.8/P18.2 JIB TRACK 18"
    NACRA
    Main Halyard Hook Murrays Part# 56-6812 Main halyard lock (hook) or all Prindles and older Nacras. Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    Recently viewed