All Prindle 18-2 Parts

64 products

    64 products
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    TRAMP P18.2/19 BLACK
    Murrays Sports
    Out of Stock
    SAIL JIB P18.2 DAC 3.9oz WHT*
    Elliott Loft
    Out of Stock
    RUDDER BLADE P19 (NEW)
    Murrays Sports
    POWER RIGHTING SYSTEM I
    Murrays Sports
    RUDDER CASTING ONLY RT PRINDLE
    Murrays Sports
    Out of Stock
    RUDDER CASTING ONLY LT PRINDLE
    Murrays Sports
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    P-18/18.2 DIAMOND WIRE W/TB
    Murrays Sports
    POWER RIGHTING SYS W/OUT POLE
    Murrays Sports
    Prindle 18.2 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    P-18.2 DOUBLE TRAPEZE (4)
    Murrays Sports
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    HAWAIIAN RIGHTING H-17/18/PRIN
    Murrays Sports
    P-18.2 FORESTAY 5/32 BK (W/TB)
    Murrays Sports
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    SPARE PARTS KIT: PRINDLE
    Murrays Sports
    P-18.2 SHROUD 5/32 RS BK
    Murrays Sports
    P-18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    104" Hobie batten part number 21000001
    H-16 Main Batten 107"
    Murrays Sports
    P-18.2 BRIDLE 5/32 BK
    Murrays Sports
    Prindle Rudder Refresh Kit
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    P-18.2 UPPER FORESTAY 5/32
    Murrays Sports
    Murrays Part# 001-7050 The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    GOOSNECK BASE FITTING ALL
    Murrays Sports
    RUDDER LOCKING BOLT PRINDLE
    Murrays Sports
    SNAP SHACKLE W/TACK 1/4"
    Murrays Sports
    PRINDLE JIB HALYARD W/CLIPS
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 (SS)
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 ALUM
    Murrays Sports
    Murrays Part# 001-2248-1 The Race Tramp Line Kit: Prindle - Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity. Because of Dyneema's characteristics, a smaller line than normal can be used, resulting in weight savings. The kit for Prindle 15, 16, 18 or Escape contains three lengths of Dyneema® line (two 11' pieces and one 22' piece of 3mm). The kit for Prindle 18.2 or 19 includes two 19' lengths of 3mm Dyneema® line.
    TRAMP LACE KIT P18.2/19 DYNMA
    Murrays Sports
    TRAMP LACE KIT RACE P16/18 DYNEEMA
    Murrays Sports
    GOOSENECK 'U' BRACKET N5.2
    Murrays Sports
    Out of Stock
    TILLER X-BAR END CAST PRINDLE
    Murrays Sports
    half round load spreader prindle rudder
    1/2 ROUND LOAD SPREADER PRINDLE
    Murrays Sports
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    TILLER & RUDDER STIFF: PRINDLE
    Murrays Sports
    Batten Caps Leech Adjustable P16 Murrays Part#012-6003 No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail. Sold in packages of 9, includes batten tie lines.
    PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9)
    Tren-Tec
    The Tramp Line Kit: Prindle- When lacing your trampoline, line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The line in this kit is black, abrasion-resistant, 8-strand low stretch. #001-2246 for Prindle 15, 16, 18 or Escape includes two 1/8" x 11' lengths and one 3/16" x 22'. #001-2248 for Prindle 18.2 or 19 includes two 19-foot lengths of
    TRAMP LACE KIT PRINDLE LOW STRETCH
    Murrays Sports
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    YOKE ASSEMBLY W/ SPACERS
    Murrays Sports
    Prindle split rings and clevis pin kit, mast hinge pin
    PINS & RINGS KIT: PRINDLE
    Murrays Sports
    ELONGATED TRAPEZE RING  Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports