Hobie, Nacra, Prindle sails and sail accessories

Sails & Accessories

240 products

Sails and sail accessories: Hobie, Nacra and Prindle battens, batten caps, sail bags, sail plates, pocket protectors, tell tales, halyards and more.

240 products

Sort

Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole).

Uses:

This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles.

Hobie 18 main traveler car 

Prindle Part# 6004

 Comparable to Hobie Cat® Part# 8020431

CLEVIS PIN 1/4 X 1-3/8"

HARKEN 57MM CARBO 6:1 MAINSHEET SYSTEM

Batten Caps Leech Adjustable Prindle 16
Murrays Part#012-6003
No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail.
Sold in packages of 9, includes batten tie lines.

PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9)

Air Flow Tels Set

Murrays Part# 007-0334

Air-flow Tels are wind-on-the-sail indicators that show the air flow across the sails, allowing you to trim sails for maximum performance. The result is better boat speed, less pinching, and no guesswork about placing the jib sheet lead forward or aft. No holes are required in the sails; waterproof adhesive locator discs attach the Tels. Tels are made of ripstop nylon for maximum sensitivity and long life.

AIR FLOW TELS SET

HOBIE 16 MAINSAIL BATTEN CAP KIT - LEACH - 1522H

H-16 MAINSAIL BATTEN LEACH CAP KIT (8)

The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines.

Main Sheet

Jib Sheet

Daggerboard Handles

Outhaul

Downhaul

Mast Rotation

Main Halyard

Trampoline Lacing Lines

Trapeze Adjustment Line

Batten Ties

Roller Furline line

Jib Halyard

Jib Luff Tension Line

H-18 LINE PACKAGE

Downhaul Kit 3:1 Wave

Murrays Part# 001-2029

This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver.

This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.

Downhaul Kit 3:1 Wave

Murrays Part# 001-2029

This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver.

This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.

WAVE DOWNHAUL KIT 3:1

Ronstan Single Block, Ferrule

Murrays Part# 21-0469

This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.

RONSTAN SINGLE BLOCK WITH FERRULE

The Murrays Prindle 16 main halyard is made to factory specs. We use 316 stainless steal bare wire and thimbles. It also has a Ronstan Halyard Shackle with a captive pin so that it will not fall out when loosened.

Prindle part number 9026

PRINDLE 16 MAIN HALYARD WITH SHACKLE

HOBIE 18 POWER DOWNHAUL KIT - 5:1
Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.

H-18 5:1 POWER DOWNHAUL KIT

Clew Kit 5-Hole (H16 Jib)

Murrays Part# 001-1012

Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006).

This product replaces discontinued item #50-22240000.

H-16 5 HOLE JIB CLEW KIT

Batten Cap Leech Adjustable H16 Jib Each

Murrays Part# 012-3004-1

No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap.

Sold Individually

ADJUSTABLE LEECH JIB BATTEN CAP (EA)

Wave Batten Set Murrays

Murrays Part# 30-3012

The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps.
The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens.

Hobie Part# 38016001

WAVE MAIN BATTEN SET

Hobie 16 jib sail, blue

PRINDLE JIB HALYARD WITH SISTER CLIPS

Harken 29mm Bullet Block

Murrays Part# 28-0082

Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.

HARKEN 29MM BULLET BLOCK

HOBIE 14 MAIN HALYARD W/SHACKLE
Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001

Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie Cat® #10651001

H-14 MAIN HALYARD WITH SHACKLE

Rooster Tell Tails
Murrays Part# 48-101579
The Rooster Tell Tails come in a pack of three green and three red self adhesive wool telltales (with TEFLON® treatment) that don´t stick to the sail when they are wet.

ROOSTER TELL TAILS

HOBIE 14 MAIN HALYARD COMPTIP

This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.

H-14 MAIN HALYARD COMPTIP

H-16 JIB BATTEN 67"

67" Murrays jib batten with a trentec batten cap.

Batten #1 in a Hobie 16 jib batten set - 20400001

H-16 JIB FIBERGLASS BATTEN 67"

HARKEN 4:1 MAIN SHEET SYSTEM

Jib Clew Plate 3-Hole

Murrays Part# 50-62270000

Hobie® factory replacement 3-hole jib clew plate (pair) with rivets.

Hobie 18 main sail clew plate

Hobie Part# 62270000

JIB CLEW PLATE 3-HOLE

DACRON INSIGNIA CLOTH - BLACK

Hobie Bravo Batten Cap
Murrays Part# 50-9101100
Hobie batten cap for round battens
Sold individually

BRAVO BATTEN CAP

Mylar Sail Repair Tape 2x10"- Clear

Murrays Part# 010-3410

Make quick and easy sail repairs with Bainbridge's 10' roll of 2"-wide clear mylar polyester film with pressure-sensitive adhesive.

MYLAR 2x10" SAIL REPAIR TAPE-CLEAR

H18 Main Adjustable Batten Leech Caps
Murrays Part# 012-4003
No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.
Hobie Part# 1523
Sold in packages of 10

H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10)

Hobie Main Sail Headboard w/ rivets
Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011

HOBIE ALUMINUM HEADBOARD WITH RIVETS

Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.

HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT

HOBIE POCKET PROTECTOR KIT

Rivet Solid A 4-6 (1/8 X 3/8)
Murrays Part# 19-5005
Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.

RIVET SOLID A 4-6 (1/8x3/8")

H16 Jib Sail (White)

Murrays Part# 50-20992010

This is an OEM Hobie White Jib for the Hobie 16 sailboat. This is class legal for One Design Hobie Racing. This sail includes batten ties

H-16 JIB SAIL (WHITE)

H-16 ROLLER FURLING JIB KIT

Headboard Replacement Kit

Murrays Part# 001-1014

Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006).

HEADBOARD REPLACEMENT KIT

H18 Angled Luff Batten Caps
Murrays Part# 012-4005
No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1563
Sold in packages of 10

H-18 ANGLED LUFF BATTEN CAPS

Murrays Hobie Getaway Turquoise Jib Sail - 37992071

GETAWAY JIB - TURQUOISE

Murrays Hobie 18 Jib sail

104" Hobie batten part number 21000001

H-16 MAINSAIL FIBERGLASS BATTEN 107"

Murrays Hobie 16 main sail - Hyde

Murrays Hobie 16 main sail red, yellow, blue

H-16 MAINSAIL 6.0 OZ DACRON

Mainsheet for a Hobie Wave sailboat made of Dacron Spun Braid. Dacron Spun Braid was the OEM sheeting line for Hobie up into the late 90s. Dacron Spun Braid has excellent grip, cleats well and is easy on the hands.

35' of 3/8 Soft Dacron Spun Braid with a strong polyester blend core.

This was the stock Hobie mainsheet line from the 80s and 90s. Very little stretch, soft hand, easy cleating.

Mainsheet for a Hobie Wave sailboat made of Dacron Spun Braid. Dacron Spun Braid was the OEM sheeting line for Hobie up into the late 90s. Dacron Spun Braid has excellent grip, cleats well and is easy on the hands.

35' of 3/8 Soft Dacron Spun Braid with a strong polyester blend core.

This was the stock Hobie mainsheet line from the 80s and 90s. Very little stretch, soft hand, easy cleating.

H WAVE MAINSHEET

Previous 1 2 3 4 … 6 Next

Recently viewed

Sails & Accessories