Sailing Blocks & Pullies

Sailing Blocks & Pullies

147 products

    Blocks and pullies for Hobie, Nacra and Prindle catamarans.  Mainsheet, Jib sheet, cheek blocks, halyard blocks, replacement sheaves, single, double, triple and quad blocks.

    147 products
    SMALL BLOCK W/ BECKET
    Ronstan
    SINGLE W/SWIVEL 20mm BB
    Ronstan
    ORBIT 30mm SINGLE W/SWIV SHKL
    Ronstan
    ORBIT 55mm SGL RAT W/SHKL HD
    Ronstan
    ORBIT 30mm SINGLE LASH
    Ronstan
    LOOP TOP SINGLE BLOCK
    Ronstan
    Series 15 Kite Block
    Ronstan
    SPRING TRIP LEVER RETURN
    Oxen
    OXEN BLOCK SELF-LOCKING SHEAVE
    Oxen
    O-RING FACE PLATE
    Oxen
    Oxen Outer Hub Lock Ring Murrays Part# 005-0761-06
    OUTER HUB LOCK RING
    Oxen
    INNER HUB ASSEMBLY
    Oxen
    Oxen C Clip 005-0761-11 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
    C CLIP
    Oxen
    REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions. The following information is provided so that you can make an informed decision about the re
    HUB CENTER SCREW (2-PC)
    Oxen
    Oxen Face Plate Murrays Part# 005-0761-08 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
    OXEN BLOCK FACE PLATE
    Oxen
    BECKET STRAP SEAL
    Oxen
    BECKET ROLLER (OXEN)
    Oxen
    OXEN BECKET STRAP KIT
    Oxen
    BECKET MOUNTING STRAP
    Oxen
    BECKET CLEVIS PIN 3/16 X 1-1/4
    Oxen
    Harken 2698 18mm FLY SOFT-ATTACH BLOCK
    HARKEN 18mm FLY SOFT-ATTACH BLOCK
    Harken
    Harken Sheave Ball Bearing 16mm The Harken Sheave Ball Bearing 16mm is the replacement for Harken 16mm air blocks. UV-stabilized Delrin® sheave with stainless steel ball bearings. Specifications: 5/8" sheave diameter; 3/16" hole diameter, 5/16" wide; 3/16" maximum line diameter; 250 lb. safe working load. Harken #415.
    HARKEN 16MM SHEAVE
    Harken
    Harken 22mm Traveler Block Murrays Part# 28-0232 Low-friction, back-to-back micro blocks are compact and lightweight. Specifications: 200 lb. SWL 1200 lb. breaking strength 1/4" maximum line diameter 7/8" sheave diameter 2-3/4" long Harken Part# 232 Hobie Cat® Part# H232
    HARKEN 22MM TRAVELER BLOCK
    Harken
    WIRE SWIVEL BULLET BLOCK SO
    Harken
    HARKEN TRIPLE BLOCK W/BKT & CAM MICRO
    Harken
    Harken Triple Micro Block Murrays Part# 28-0228 Harken 22mm ball bearing micro triple block with stainless side plates. Specifications: 1/4" maximum line capacity 500 lb. SWL 1200 lb. breaking strength 7/8" sheave 2" long Harken Part# 228 Hobie part# H228 
    HARKEN TRIPLE MICRO BLOCK
    Harken
    Harken 29mm Bullet Block - Swivel Murrays Part# 28-0166 Medium-size Harken double bullet block with swivel has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 29MM BULLET BLOCK-SWIVEL
    Harken
    Harken 22mm Becket Block Murrays Part# 28-0225 Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Harken ball bearing micro single block with becket has stainless side plates.
    HARKEN 22MM BECKET BLOCK
    Harken
    Harken 40mm Ratchet Block-Swivel Murrays Part# 28-2608 This small ratchet with on/off switch is ideal for jib sheets and spinnakers on small dinghies where size and weight are critical. Eight-faceted machined aluminum sheave holds line securely. Hard coat anodizing provides durability.
    HARKEN 40MM RATCHET BLOCK-SWIVEL
    Harken
    Out of Stock
    BIG BULLET W/SWIVEL SO
    Harken
    HARKEN 38MM BIG BULLET BLOCK-BECKET
    Harken
    BLOCK SINGLE BULLET (WIRE)
    Harken
    BLOCK SINGLE 3" HEXARATCHET
    Harken
    Harken Block Single 2.25" Hexaratchet Murrays Part# 28-0019 Sheave Size 57mm 2.25" Max Line Size 10mm 3/8" Max Working Load 227KG 500lb Breaking Strength 907kg 2000lb Holding Power 10:1 Hexaratchets grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions an
    BLOCK SINGLE 2.25" HEXARAT
    Harken
    Out of Stock
    SINGLE MICRO W/SWIVEL SO
    Harken
    BLOCK DOUBLE W/BECKET BULLET
    Harken
    Out of Stock
    BLOCK DOUBLE W/BECKET 2.25 SO
    Harken
    Harken Block Double Micro Murrays Part# 28-0226 Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: 1/4" maximum line capacity 350 lb. SWL 1200 lb. breaking strength 2" long Harken Part# 226 Hobie Part# H226S
    HARKEN BLOCK DOUBLE MICRO
    Harken
    Harken 29mm Double Bullet Block Murrays Part# 28-0084 Medium-size Harken double bullet block has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM DOUBLE BULLET BLOCK
    Harken
    Out of Stock
    BLOCK DOUBLE 2.25
    Harken