Sailboat rigging, Hobie, Nacra, Prindle, Sol cat, Dart, and more. Made to order. Murrays.com

Rigging

450 products

    Murrays rigging is made to order in Carpinteria California by seasoned rigging professionals using premium materials and tooling.  All made to factory spec lengths. Main Halyard, jib halyard, forestay, shroud, bridles, diamond wires, roller furling jib

    450 products
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    RONSTAN RED TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    Ronstan Eye & Eye Swivel Murrays Part# 21-0078 This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.
    RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)
    Ronstan
    Ronstan Series 55 Orbit Block™, Ratchet Murrays Part# 21-56100 Now you can enjoy the flexibility of setting up your ratchet blocks to suit yourself. Ronstan is the only company that offers a ratchet block with both auto and manual engagement modes. In the auto mode of the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET
    Ronstan
    Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
    Ronstan
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK WITH FERRULE
    Ronstan
    Ronstan Small Becket Block Murrays Part# 21-0188 Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs.
    RONSTAN SMALL BECKET BLOCK
    Ronstan
    Ronstan Series 30 Utility Block, Fiddle Murrays Part# 21-0186 Use this Ronstan small fiddle block for 4:1 system for boom vangs or righting aids. This is used for H16 Aussie Halyard Systems too Fiddle block with tube rivets
    RONSTAN SMALL FIDDLE BLOCK
    Ronstan
    Ronstan shock block Part # RF8080 5mm
    RONSTAN SMALL SHOCK 3/16"
    Ronstan
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    Ronstan bow shackle measurements
    RONSTAN STAINLESS STEEL BOW SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    Thimble 1/16-3/32 Stainless Steel Ronstan's #481 thimble is used on Hobie 18 jib halyard, shrouds, forestays and trapeze wires. Constructed of grade 304 stainless steel. Weight: .1 oz.
    RONSTAN STAINLESS THIMBLE FOR 2.5MM (3/32") WIRE
    Ronstan
    Ronstan Stainless Thimble for 5mm (3/16") Wire Ronstan thimble is used on shrouds. Constructed of grade 316 stainless steel. Weight: .2 oz.
    RONSTAN STAINLESS THIMBLE FOR 5MM (3/16") WIRE
    Ronstan
    Ronstan Tie Ball Red 32mm (1 1/4") Diameter Convenient way to terminate control lines while also providing a textured grip for pulling. Recess in one side to contain the stop knot.
    RONSTAN TIE BALL-RED
    Ronstan
    Add color and comfort with Ronstan's molded, UV-stabilized nylon trapeze handle. Skipper and crew's trapeze can be color-coded for easy identification. Use this page to order #21-0171B Blue and #21-0171R Red. Ronstan Part# PNP171BLU or PNP171RED
    RONSTAN TRAPEZE HANDLE
    Ronstan
    RONSTAN WAVE MAINSHEET BASE BLOCK
    Ronstan
    Ronstan Wave Mainsheet Upper Block Murrays Part# 21-41500 The Hobie Wave Mainsheet Upper Block is a Ronstan Series 40 fiddle block with 40mm sheaves. Series 40 All Purpose Block, Fiddle All purpose fiddle block with universal head
    RONSTAN WAVE MAINSHEET UPPER BLOCK
    Ronstan
    Rope End Stop Murrays Part# 27-0199 This 1-1/8" diameter plastic ball has a 1/4" hole and comes in assorted colors as available. The hole on one end accommodates the stop knot.
    ROPE END STOP
    Misc
    Rope Splicing Fid Kit Murrays Part# 001-1400 The Murrays Rope Splicing Fid Kit includes 9 fids from 1.7 to 5mm that can splice 1 - 6 mm diameter lines. It includes everything you need for small boat use. It can make tapered sheeting lines, split lines, halyards, looped ends, soft shackles, you name it. The kit includes everything you need to cut, splice and finish the job all contained in a water tight box for easy storage.
    ROPE SPLICING FID KIT
    Murrays Sports
    Screw 8-32 X 3/8" THMS Roller Furler Drum Murrays Part# 50-8030501 Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum. Hobie Part# 8030501
    SCREW 8-32X3/8" THMS
    Hobie
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 10mm 3/8-1/2"
    Selma
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 13mm 1/2-9/16"
    Selma
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 4.0mm 1/8-1/4"
    Selma
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 5.5mm 1/4-5/16"
    Selma
    The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide. Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
    SELMA FID 7.5mm 5/16-3/8"
    Selma
    Selma_fid-kit x4 4.5mm-10mm
    SELMA ROPE SPLICE FIDS x4
    Selma
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    SHROUD TENSIONER
    SHROUD TENSIONER/DE-TENSIONER
    Misc
    Sidewinder Becket Murrays Part# 005-0701 Add on becket for classic Harken Mainsheet systems. The sidewinder becket is for older Harken 2.25" or 3.00" triple blocks. It enables extra purchase ratio without sacrificing low profile block stacking. Some drilling is required for installation.
    SIDEWINDER BECKET
    Murrays Sports
    SINGLE SHANK BALL STOP 3/32"
    Misc
    Single Wire Block With Shackle Murrays Part# 22-3302 This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896.
    SINGLE WIRE BLOCK WITH SHACKLE
    Schaefer Marine
    Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
    SISTER CLIP MICRO (EA)
    Murrays Sports
    SK78 Mini Spool 3mm Dyneema Lashing Line The SK78 Mini Spool 3mm- Robline Dyneema good for any small boat kit…. for tying. lashing, lanyards, pigtails etc. Easily spliced with a small Selma Fid or a D Splicing tool. Honeywell International produces a similar line, marketed as Spectra® Identical to Ocean 3000 XG, but on a smaller spool, this rope is made of pure Dyneema SK78 and treated with FSE Robline’s S.Y.I.S. coating technology. Dyneema SK78 has the same high strength of SK75, but with lower creep
    SK78 MINI DYNEEMA SPOOL 3MM
    Robline
    Sol Cat -18 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased s
    SOL 18 DOUBLE TRAPEZE (4)
    Murrays Sports
    Sol Cat 18 Bridle 1/8" Murrays Part# 002-6214-02 Single bridle for Sol Cat 18 Bridle 1/8" is constructed to factory specifications.
    SOL-18 BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    SOL-18 FORESTAY 1/8 -BLACK
    Murrays Sports
    SOL-18 MAIN HALYARD W/SHACKLE Main halyard for a 18' Sol Cat catamaran.
    SOL-18 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02
    Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02
    SOL-18 TRAPEZE WIRES (2)
    Murrays Sports
    STAY ADJUSTER 1/8"
    Misc
    The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
    STAYMASTER TURNBUCKLE 1/8
    Staymaster
    Stop Sleeve 3/16" Murrays Part# 002-1061 A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicro press tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening.
    STOP SLEEVE 3/16"
    Misc
    Recently viewed