Prindle 18-2 Rudder and Steering Parts

24 products

    Parts for your Prindle 18-2 Rudder system

    24 products
    Out of Stock
    RUDDER BLADE P19 (NEW)
    Murrays Sports
    RUDDER CASTING ONLY RT PRINDLE
    Murrays Sports
    Out of Stock
    RUDDER CASTING ONLY LT PRINDLE
    Murrays Sports
    Prindle Rudder Refresh Kit
    Murrays Sports
    RUDDER LOCKING BOLT PRINDLE
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 (SS)
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    RUDDER PIN NAC/PRIN/H-21 ALUM
    Murrays Sports
    Out of Stock
    TILLER X-BAR END CAST PRINDLE
    Murrays Sports
    half round load spreader prindle rudder
    1/2 ROUND LOAD SPREADER PRINDLE
    Murrays Sports
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    TILLER & RUDDER STIFF: PRINDLE
    Murrays Sports
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    YOKE ASSEMBLY W/ SPACERS
    Murrays Sports
    NACRA and Prindle Rudder Spring Murrays Part# 56-4016 The NACRA and Prindle Rudder Spring is the rudder spring for all Prindle and most newer Nacras (Late Model US boats, Inters and all European NACRA boats) is Nacra Sailing factory item #30418. Fits Nacra 460, Nacra 500, Nacra 570, Nacra 16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon and all Inters.
    RUDDER SPRING PRINDLE/NACRA
    Murrays Sports
    LOCK RELEASE STRAP P-RUDDER
    Murrays Sports
    Hobie rudder bushing. Hobie part number 8062001
    RUDDER TITE BUSHING EACH
    Murrays Sports
    Replacement Sheave Prindle Rudder Upper Ronstan PN RF1741 Replacement sheave for upper part of rudder casting on all models of Prindle catamarans. Replacement for Performance Sports item #4009. 1/4" wide x 3/4" diameter, 1/4" hole.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE UPER RUDDER SHEAVE - 4009
    Ronstan
    CLEVIS PIN 1/4 X 3/4"
    Misc
    RUDDER UPPER ROLLER PRINDLE
    Murrays Sports
    Prindle Rudder Lock Bolt Nut Murrays Part# 56-4018 The Prindle Rudder Lock Bolt Nut is the factory replacement 3/8″ hex nut for rudder lock bolts on all Prindles. Also used as the jam nut for adjuster screw on Nacra bridle foil assembly. Nacra Sailing factory item #30420. Prindle part number 4018
    Prindle rudder parts 4000, 4001, 4002, 4004, 4005, 006, 4007, 4009, 4012, 4010, 4014, 013, 4016, F115, F120
    RUDDER LOCK BOLT NUT PRINDLE
    Murrays Sports
    Murrays PN 001-0053 The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
    SPACER: RUDDER STIFFENING
    Murrays Sports
    BOLT FOR GUDGEON 1/4-20X1.25"
    MISC
    Prindle Rudder Lower Plastic Spacer Murrays Part# 56-4014 Prindle Rudder Lower Plastic Spacer is used on the rudder systems of all Prindle models. Performance Sports factory item #4014. 9/16″ wide x 1/2″ diameter, 1/4″ hole.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE PLASTIC LOWER RUDDER SPACER
    Murrays Sports
    Nylon Washer Internal Casting Prindle Murrays Part# 56-F118 Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible. Performance Sports factory item #F118
    NYLON WASHER INTERNAL CAST P
    Murrays Sports
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20
    Misc
    Nylon Spacer Murrays Part# 56-4011 Prindle rudder spacer, Prindle part number 4011.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE RUDDER SPACER - 4011
    Murrays Sports