Prindle 18-2 Rigging Parts

19 products

    Rigging Parts for your Prindle 18-2

    19 products
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    P18, P18.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Prindle 18.2 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    P-18.2 DOUBLE TRAPEZE (4)
    Murrays Sports
    P18.2 Forestay 5/32" Black Wire with Turnbuckle Murrays Part# 002-2545-42 Forestay with turnbuckle for Prindle 18.2 is constructed to factory specifications.
    P-18-2 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE
    Murrays Sports
    P-18.2 SHROUD 5/32' BLACK WIRE ROLER SWAGED
    Murrays Sports
    P-18.2/19 JIB BLOCK WIRE 4-WAY
    Murrays Sports
    P-18.2 BRIDLE 5/32 BK
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    P-18.2 UPPER FORESTAY 5/32
    Murrays Sports
    PRINDLE JIB HALYARD W/CLIPS
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2 WITH LANYARD
    Misc
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16 BOWSHACKLE WITH HOLE
    Ronstan
    Prindle split rings and clevis pin kit, mast hinge pin
    PRINDLE PINS & RINGS KIT
    Murrays Sports
    ELONGATED TRAPEZE RING  Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports
    DIAMOND WIRE ROLLER
    Misc
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA, PRINDLE, SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc