Prindle 16 Rigging Parts

17 products

    Rigging Parts for your Prindle 16

    17 products
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    OXEN 3" BLOCK W/PIN & BECKET
    Oxen
    $279.00
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    $198.95
    The P16 Forestay 1/8" with turnbuckle for Prindle 16 is constructed to factory specifications.

Available with black or white coating

Prindle part number 9039



​Made to order in Carpinteria California, modifications and customization available upon request.
    P-16 FORESTAY 1/8" WIRE WITH TURNBUCKLE
    Murrays Sports
    $115.00
    Prindle 16 trapeze wire part number 9000
The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    White Black
    P-16 DOUBLE TRAPEZE (4)
    Murrays Sports
    $115.00
    The Murrays Prindle 16 main halyard is made to factory specs.  We use 316 stainless steal bare wire and thimbles.  It also has a Ronstan Halyard Shackle with a captive pin so that it will not fall out when loosened.

Prindle part number 9026
    P-16 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    $115.00
    The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
    H17 Trapeze Wires (2)

The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles.

Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge.

Compare to Hobie part number 1471B.

​Order shock cord, Can't miss rings/dog bones and adjustment kits separately.

Murrays PN 002-0353-01

002-0353-02
    White Black
    P-16 TRAPEZE WIRES (2)
    Murrays Sports
    $80.00
    Prindle 16 Shroud 1/8" Coated Wire - HD

Single shroud (sidestay) for Prindle 16 is constructed to factory specifications.

Made with 316 Stainless steal 1x19 PVC coated wire.

Double swaged marine thimble on the top and a Hydrolic swaged marine eye on the bottom for increased strength and longevity.

Prindle part number 9000
    White Black
    P-16 SHROUD 1/8" BLACK WIRE HEAVY DUTY
    Murrays Sports
    $64.00
    Prindle 16 Shroud 1/8" Coated Wire

Single shroud (sidestay) for Prindle 16 is constructed to factory specifications.

Made with 316 Stainless steal 1x19 PVC coated wire.

Marine thimbles on both ends double swaged.

Prindle part number 9000
    White Black
    P-16 SHROUD 1/8" WIRE
    Murrays Sports
    $48.00
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    $45.00
    P16 Upper Forestay 1/8" Bare Wire

Murrays Part# 002-2234-00



Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications.
    P-16 UPPER FORESTAY 1/8" BARE WIRE
    Murrays Sports
    $36.00
    PRINDLE JIB HALYARD W/CLIPS
    Murrays Sports
    $35.00
    Prindle 16 Bridle 1/8"
The Prindle 16 Bridle is a single 1/8" bridle wire for the Prindle 16 catamaran. Constructed to factory specifications. Available in White, Black or Bare wire.
Prindle Part Number 9002 - Prindle wire rigging made by Murrays Marine
    DART-18 FORESTAY 1/8 BARE
    Bare White Black
    P-16 BRIDLE 1/8" WIRE
    Murrays Sports
    $32.00
    P16, P18 Jib Block Wire

Murrays Part# 002-2224-00

Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
    P-16, P18 JIB BLOCK WIRE
    Murrays Sports
    $25.00
    Prindle split rings and clevis pin kit, mast hinge pin
    PINS & RINGS KIT: PRINDLE
    Murrays Sports
    $15.00
    ELONGATED TRAPEZE RING 

Large trapeze ring made of solid 316 stainless steel for strength and longevity.

AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring. 

Hobie part number 2002, compare to Hobie part number 2001

Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports
    $12.00
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway

Murrays Part# 001-8019

A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    TRAP SHOCK CORD: NAC/PRIN/SOL/GET
    Murrays Sports
    $12.00
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20
    Misc
    $0.45