NACRA SAILING N460 Parts

74 products

    74 products
    Harken 22mm Block-Swivel Murrays Part# 28-0292 Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.
    HARKEN 22MM BLOCK-SWIVEL
    Harken
    NACRA URETHANE TILLER TIE BAR ROD WITH STRING
    NACRA
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    Hobie, Nacra, Prindle Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Applications:  Hobie 14, 16, 17, 18, 18SX Sold in pairs Compare to Hobie Cat® Part#
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    NACRA MAINSAIL FEEDER
    NACRA
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Harken 29mm Bullet Block Murrays Part# 28-0082 Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM BULLET BLOCK
    Harken
    Snuffer Pole Pin Bracket Murrays Part# 56-9626 Use this bracket to attach spinnaker pole (discontinued item #56-9622) to boat. Nacra Sailing factory item# 30293
    NACRA SNUFFER POLE PIN BRACKET
    NACRA
    Out of Stock
    NACRA Masthead Sheave 460/ 5.0/ 5.2/ 5.7 - 30160 Replacement mast head sheave for a Nacra 460, 5.0, 5.2 and 5.7. Nacra part number 30160
    NACRA MASTHEAD SHEAVE
    NACRA
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Harken 22mm Cheek Block Murrays Part# 28-0233 Harken micro cheek is used as a downhaul and turning block and as the Hobie 16 jib traveler control line block on the front crossbar. Specifications: 200 lb. SWL 1200 lb. breaking strength 1/4" maximum line diameter 7/8" sheave diameter 2-1/2" long
    HARKEN 22MM CHEEK BLOCK
    Harken
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    Nacra Bridle Bow Eye Murrays Part# 56-30036
    NACRA BRIDLE BOW EYE
    NACRA
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    Out of Stock
    Nacra Furler Tang Upper Murrays Part# 56-30296 To connect your forestay with your furler system. Compatibility: Nacra 500 Nacra 460 Nacra 570 Nacra Part# 30296
    NACRA TANG FURLER UPPER
    NACRA
    Spreader Tip Plate Murrays Part# 56-9842 Spreader tip plate for all Nacras and Prindle 18, 18.2 and 19. Nacra Sailing factory item# 30316
    NACRA SPREADER TIP PLATE
    NACRA
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    Out of Stock
    NACRA SPINNAKER POLE CAP FRONT INTER
    NACRA
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    MAIN SAIL POCKET PROTECTOR KIT
    Murrays Sports
    Zip Tech Zipper Lubricant 0.5oz Murrays Part# 38-1925 Zipper Lubricant for use on dry suits, and other tough zipper applications to ensure zippers operate properly and seal out the elements.
    ZIPPER LUBRICANT
    Misc
    Rear Crossbar Bolt 3/8-16X4.5 Hex Head Murrays Part# 56-F181 Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance Sports factory item# F181
    NACRA REAR CROSSBAR BOLT 3/8-16X4.5"
    NACRA
    Out of Stock
    NACRA RUDDER HEAD ROLLER
    NACRA
    Out of Stock
    NACRA RUDDER ROLLER UPPERCASTING
    NACRA
    NACRA UPPER RUDDER CASTING INSERT
    NACRA
    Out of Stock
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    HOBIE DRAIN PLUG WITH GASKET
    Misc
    Replacement part for the adjustable trapeze system found on modern NACRA catamarans. Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS NACRA Part # 30938
    NACRA TRAPEZE STOP
    NACRA
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    Clevis Pin 1/4 X 1/2 Murrays Part# 22-9808 Stainless steel clevis pin. Measurement is 1/4" diameter x 1/2" grip length (shoulder to the split ring hole). Substitute for Hobie Cat® #8020371.
    CLEVIS PIN 1/4 X 1/2"
    Misc
    Rudder Kick-Up Stop Murrays Part# 56-4518 The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ. Performance Sports factory item# 4518
    NACRA RUDDER KICK-UP STOP
    NACRA
    3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    3/16 - 1/4" SPLIT RING WITH PIGTAIL
    Misc
    Nacra Spring Pin 1/8 x 7/8 Murrays Part# 56-31389 Spring pin 1/8 x 7/8
    NACRA SPRING PIN
    NACRA
    Rivet Washer Nylon Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions. Nacra PN 40200
    RIVET WASHER NYLON
    Murrays Sports
    Recently viewed