NACRA N6.0 Rigging

18 products

18 products

Sort

Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.

HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT

N-6.0, 6.0NA JIB BLOCK WIRE

Nacra 6.0 NA Double Trapeze (4 handles)

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased

N-6.0NA DOUBLE TRAPEZE (4)

Nacra 6.0 Trapeze Wires - NACRA Part Number 9072

N-6.0 DOUBLE TRAPEZE (4)

N-6.0NA DIAMOND WIRE SHORT

N6.0 North American Diamond Wire Long

Murrays Part# 002-4794-20

Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications.

N-6.0NA DIAMOND WIRE LONG

N6.0 Diamond Wire with Turnbuckle

Murrays Part# 002-4694-20

Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications.

N-6.0 DIAMOND WIRE WITH TURNBUCKLE

N6.0 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4605-12

Single black shroud for Nacra 6.0 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 22' 5-1/4" pull-to-pull.

To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA (North American), please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and had a bridle foil.

N-6.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

N6.0 North American Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4705-12

Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull.

To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil.

N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWEGED

N-6.0NA FORESTAY 5/32" BLACK WIRE

N-6.0 JIB HALYARD W/SHACKLE

N-6.0/NA JIB HALYARD

N6.0 Forestay 5/32" Black Wire

Murrays Part# 002-4645-12

Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications.

N-6.0 FORESTAY 5/32" BLACK WIRE

N-6.0-NA BRIDLE 5/32 BK

Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle

Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone

CAN'T MISS RINGS

N-6.0 BRIDLE 5/32 BK

ELONGATED TRAPEZE RING 

Large trapeze ring made of solid 316 stainless steel for strength and longevity.

AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring. 

Hobie part number 2002, compare to Hobie part number 2001

Length: 7-1/2"

ELONGATED TRAPEZE RING

Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway

Murrays Part# 001-8019

A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d

TRAP SHOCK CORD: NAC/PRIN/SOL/GET

NACRA N6.0 Rigging