NACRA N6.0 Parts

74 products

    74 products
    N6.0NA JIB SAIL RACE-WHITE
    NACRA
    Harken 57mm Carbo 8:1 System Murrays Part# 28-81 Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
    HARKEN 57mm CARBO 8:1 SYSTEM
    Harken
    Harken 57mm Carbo Ratchamatic 7:1 Low-Profile Mainsheet System Murrays Part# 28-71 The Harken 7:1 Mainsheet System includes a 57mm Triple Carbo Ratchamatic Base with 40mm Carbo single (Harken #HSB360) added on to it and a 57mm Triple with becket boom block (Harken #2605) By adding the 40mm Carbo single to the base block we have turned this into a low profile 7:1 Mainsheet system. line is not included. Safe working load is 1500 pounds; breaking strength is 3750 pounds.
    HARKEN 57MM CARBO RATCHAMATIC 7:1 LOW-PROFILE MAINSHEET SYSTEM
    Harken
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    TRAMP N6.0 1pc Bias BK
    Murrays Sports
    Rudder Cheek Casting Murrays Part# 56-4501 This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting. Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ). Nacra Sailing factory item# 30107
    RUDDER CHEEK CASTING
    NACRA
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16, wave
    ECONOMY BOAT COVER
    Murrays Sports
    Catamaran Boat Yard Cover
    Misc
    Out of Stock
    Bridle Foil Rod with Screw Adjuster N5.8, 6.0 Murrays Part# 56-9669
    BRIDLE FOIL ROD w/SCREW ADJUSTR
    NACRA
    CAT TRAX CRADLES (PAIR)
    Cat Trax
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    NACRA MAST SUPPORT ROD W/NUTS & WSHR
    Murrays Sports
    N-6.0, 6.0NA JIB BLOCK WIRE
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    Murrays 84" Fiberglass Tiller Extension
    Murrays Sports
    NACRA DOLPHIN MAST SUPPORT ROD
    Murrays Sports
    Nacra 6.0 NA Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
    N-6.0NA DOUBLE TRAPEZE (4)
    Murrays Sports
    Nacra 6.0 Trapeze Wires - NACRA Part Number 9072
    N-6.0 DOUBLE TRAPEZE (4)
    Murrays Sports
    N-6.0NA DIAMOND WIRE SHORT
    Murrays Sports
    N6.0 North American Diamond Wire Long Murrays Part# 002-4794-20 Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications.
    N-6.0NA DIAMOND WIRE LONG
    Murrays Sports
    Mast Base Casting Murrays Part# 56-6605 Factory replacement mast base casting for Nacras except those with a carbon mast. Nacra Sailing item# 30177
    MAST BASE CASTING
    NACRA Austrailia
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    N6.0 Diamond Wire with Turnbuckle Murrays Part# 002-4694-20 Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications.
    N-6.0 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Nacra Mast Head Casting Murrays Part# 56-6602 Nacra mast head casting is for Nacra Models 5.0/5.2/5.5/5.7/5.8/6.0/18SQ Nacra Sailing factory item# 30176
    MAST HEAD CASTING
    NACRA Austrailia
    Out of Stock
    N6.0 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4605-12 Single black shroud for Nacra 6.0 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 22' 5-1/4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA (North American), please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and had a bridle foil.
    N-6.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA KIT
    Murrays Sports
    Out of Stock
    N6.0 North American Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4705-12 Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil.
    N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWEGED
    Murrays Sports
    Out of Stock
    N-6.0NA FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N6.0 Jib Halyard with Shackle Murrays Part# 002-4683-50 Jib halyard with shackle for Nacra 6.0 is constructed to factory specifications.
    N-6.0 JIB HALYARD WITH SHACKLE
    Murrays Sports
    N-6.0/NA JIB HALYARD
    Murrays Sports
    Out of Stock
    N6.0 Forestay 5/32" Black Wire Murrays Part# 002-4645-12 Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications.
    N-6.0 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N-6.0-NA BRIDLE 5/32 BK
    Murrays Sports
    Mast Over Rotator Murrays Part# 56-9866 This is the big wish bone rotator that goes out in front of the mast. Most have been removed or retrofitted, but we have a couple left if you're hunting for one! Nacra part# 9866
    MAST OVER ROTATOR
    NACRA
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Spreader Bar Forward Murrays Part# 56-9921 Forward spreader bar for Nacra 6.0NA (North American) Nacra Sailing factory item# 30330
    SPREADER BAR FORWARD
    NACRA
    Spreader Bar 3-Hole Murrays Part# 56-9920 Three-hole spreader bar for Nacra 6.0NA (North American). Nacra Sailing factory item# 30329
    SPREADER BAR-3 HOLE
    Murrays Sports
    Nacra Side Loader Assembly Murrays Part# 56-1058 Daggerboard side loader assembly for Nacra 5.8 or 6.0 Performance Sports factory item# 1058
    NACRA SIDE LOADER ASSEMBLY
    NACRA
    Spreader Bar Aft Murrays Part# 56-9843 Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components. Nacra Sailing factory item# 30335
    SPEADER BAR AFT
    NACRA
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc