NACRA N5.7 Parts ALL

44 products

    44 products
    Out of Stock
    Harken 57mm Carbo 8:1 System

Murrays Part# 28-81



Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
    HARKEN 57mm CARBO 8:1 SYSTEM
    Harken
    $535.00
    CHEATA MOTOR BRACKET
    Murrays Sports
    from $495.00
    TRAMP N5.7 1-PC BIAS BK
    Murrays Sports
    $450.00
    RUDDER CASTING ASSY NACRA
    Murrays Sports
    $375.00
    Power Righting System I

Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    $299.00
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    $198.95
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    $130.00
    Nacra 5.7 Double Trapeze (4 handles)


The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased se
    White Black
    N-5.7 DOUBLE TRAPEZE (4)
    Murrays Sports
    $125.00
    MAST BASE CASTING NACRA
    NACRA Austrailia
    $120.00
    N5.7 Diamond Wire with Turnbuckle

Murrays Part# 002-4494-20

Diamond wire with turnbuckle for Nacra 5.7 is constructed to factory specifications.
    N-5.7 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    $115.00
    Spare Parts Kit: Nacra

Murrays Part# 001-8221

Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors.

Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    SPARE PARTS KIT: NACRA
    Murrays Sports
    $110.00
    MAST HEAD CASTING NEW NACRA
    NACRA Austrailia
    $100.00
    Out of Stock
    Hull Cradle: V Shaped

Murrays Part# 13-7020
    HULL CRADLE: V SHAPED
    Murrays Sports
    $99.00
    N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4305-12

Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $95.00
    N-5.7 JIB HALYARD W/SHACKLE
    Murrays Sports
    $90.00
    N-5.7 Forestay 5/32" Black Wire Roller Swaged

Murrays Part# 002-4445-12

Forestay for Nacra 5.7 is constructed to factory specifications from 5/32" black-coated wire with hydraulically swaged fittings.
    N-5.7 FORESTAY 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $90.00
    N-5.7 MAIN HALYARD W/SHACKLE
    Murrays Sports
    $90.00
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    $64.95
    Out of Stock
    Harken Sail Chafe Protector

Murrays Part# 28-0285



Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    $47.80
    Quick Release Pin 1/4 X 1-1/4 with Lanyard

Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4 WITH LANYARD
    Misc
    $47.00
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard

Murrays Part# 18-4M100



This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.



Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1 WITH LANYARD
    Misc
    $47.00
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.



Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP

Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1
    Misc
    $45.00
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    $45.00
    Quick-Release Pin Deluxe 1/4 X 3/4
Murrays Part# 18-4M075
This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4
    Misc
    $35.00
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard

Murrays Part# 18-4M150L



This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place.

This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin,



Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP

Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2 WITH LANYARD
    Misc
    $30.00
    DACRON INSIGNIA CLOTH - BLACK
    Misc
    $25.00
    HALYARD POUCH 5"X9" ASST COLOR
    Murrays Sports
    $22.00
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra.

Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment. 

Compare to Hobie Cat #30317.
    PINS & RINGS KIT:H-17/20/NACRA
    Murrays Sports
    $21.00
    Out of Stock
    NACRA Masthead Sheave 460/ 5.0/ 5.2/ 5.7 - 30160

Replacement mast head sheave for a Nacra 460, 5.0, 5.2 and 5.7.

Nacra part number 30160
    NACRA Masthead Sheave 460/ 5.0/ 5.2/ 5.7 - 30160
    NACRA
    $20.00
    SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE
    Murrays Sports
    $15.00
    Harken 38mm Big Bullet Sheave

Murrays Part# 56-6503

The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.
    HARKEN 38MM BIG BULLET SHEAVE
    Murrays Sports
    $15.00
    ELONGATED TRAPEZE RING 

Large trapeze ring made of solid 316 stainless steel for strength and longevity.

AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring. 

Hobie part number 2002, compare to Hobie part number 2001

Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports
    $12.00
    DIAMOND WIRE ROLLER
    MISC
    $12.00
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway

Murrays Part# 001-8019

A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    TRAP SHOCK CORD: NAC/PRIN/SOL/GET
    Murrays Sports
    $12.00
    Hobie Cat #80550005 Main sail batten pocket protector kit.  Hobie, Nacra, Prindle.
    SAIL POCKET PROTECTOR KIT MAIN
    Murrays Sports
    $9.00
    Ronstan Mast HD Base Sheave Nacra, Prindle18/19 Prindle Mast Head Sheave, Nacra Base

Murrays Part# 56-6804

Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
    RONSTAN MAST HD BASE SHEAVE NACRA, PRINDLE 18/19
    Ronstan
    $4.65
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG W/GASKET
    Misc
    $4.05
    DOLPHIN STRIKER ROD NUT NACRA
    MISC
    $3.50
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    $2.00
    Bolt Hex Head 5/16-18 X 1.5"

Murrays Part# 19-2229




Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting.

Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    $1.50