NACRA N5.5SL Parts ALL

55 products

    55 products
    CHEATA MOTOR BRACKET
    Murrays Sports
    Out of Stock
    TRAMP N5.5SL 1pc Bias BK
    Murrays Sports
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16
    Murrays 1 Piece Econo Boat Cover Econo covers are economical, lightweight and waterproof. They are basic one-piece catamaran covers that fit loosely and secure with nylon ribbon ties. The econ covers fit multiple catamarans from the Hobie Wave to the Nacra F18. Econo covers provide full coverage and are ideal for use on the beach and in the yard thru the winter. Materials: The we use a 3-ply polyvinyl material that has a black interior, a fiber laminate core that effectively resists rips, Hobie 16, wave
    ECONOMY BOAT COVER
    Murrays Sports
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    OXEN 3" BLOCK W/PIN & BECKET
    Oxen
    NACRA MAST SUPPORT ROD W/NUTS & WSHR
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    Murrays 84" Fiberglass Tiller Extension
    Murrays Sports
    NACRA DOLPHIN MAST SUPPORT ROD
    Murrays Sports
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Nacra 5.5SL Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased separately) may be added to trap wires with no installation charge. Just order the trap wires and the trap adjust kit at the same time and we will
    N-5.5SL DOUBLE TRAPEZE (4)
    Murrays Sports
    Mast Base Casting Murrays Part# 56-6605 Factory replacement mast base casting for Nacras except those with a carbon mast. Nacra Sailing item# 30177
    MAST BASE CASTING
    NACRA Austrailia
    N5.5SL Diamond Wire with Turnbuckle Murrays Part# 002-4394-20 Diamond wire with turnbuckle for Nacra 5.5SL is constructed to factory specifications.
    N-5.5SL DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
    NACRA SPARE PARTS KIT
    Murrays Sports
    Nacra Mast Head Casting Murrays Part# 56-6602 Nacra mast head casting is for Nacra Models 5.0/5.2/5.5/5.7/5.8/6.0/18SQ Nacra Sailing factory item# 30176
    MAST HEAD CASTING
    NACRA Austrailia
    N-5.5SL JIB HALYARD W/SHACKLE
    Murrays Sports
    Out of Stock
    N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4305-12 Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Out of Stock
    N5.5SL Forestay 5/32" Black Wire  Murrays Part# 002-4345-12 Forestay for Nacra 5.5SL is constructed to factory specifications from 5/32" black-coated wire.
    N-5.5SL FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    N-5.5SL MAIN HALYARD W/SHACKLE
    Murrays Sports
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    Out of Stock
    N-5.5SL JIB BLOCK WIRE
    Murrays Sports
    N-5.5SL BRIDLE 5/32 BK
    Murrays Sports
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Out of Stock
    N-5.7 BRIDLE 5/32 BK
    Murrays Sports
    Spreader Bar Aft Murrays Part# 56-9843 Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components. Nacra Sailing factory item# 30335
    SPEADER BAR AFT
    NACRA
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    Spreader Bar Forward Fine Threaded Murrays Part# 56-9844 Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components. Nacra Sailing factory item# 30336
    FORWARD SPREADER BAR (FINE THREADS)
    NACRA
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    DOLPHIN MAST SUPPORT PAD
    NACRA
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    End Cap With Hole Murrays Part# 56-2503 Nacra crossbar end cap. Used on all Nacras with round crossbars. Pictured with hole. Nacra front crossbar end cap with hole part #2503, rear crossbar end cap without hole part #3503  Compatible with Nacra 4.5, 450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, and 18SQ
    END CAP WITH HOLE
    NACRA
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Front Beam Strap Murrays Part# 56-2509 The Nacra Front Beam Strap is Nacra Sailing factory front beam strap #30068 fits the Nacra 5.2, 5.5, 5.5, 6.0 and 18SQ.
    FRONT BEAM STRAP
    NACRA
    Beam Strap Rear N5.2, N5.5, N5.8 Murrays Part# 56-3509 Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094.
    REAR BEAM STRAP
    NACRA
    N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006
    WIDE GUDGEON
    NACRA
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports