NACRA N5.2 Rigging

NACRA N5.2 Rigging

24 products
    24 products
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    $202.20
    Murrays Part# 001-1130

Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings.  Show with can't miss rings and trap shock cord.  Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    $129.00
    Nacra 5.2 Trapeze Wires - NACRA Part Number 9540
    White Black
    N-5.2 DOUBLE TRAPEZE BK (4)
    Murrays Sports
    $120.00
    N5.2 Dimond Wire with Turnbuckle and Straight Spreader Bar (First Generation)

Murrays Part# 002-4294-20-1
    N-5.2 DIAMOND WIRE WITH TURNBUCKLE AND STRAIGHT SPREADER BAR (FIRST GENERATION)
    Murrays Sports
    $110.00
    N5.2 Diamond Wire with Turnbuckle

Murrays Part# 002-4294-20



Diamond wire with turnbuckle for Nacra 5.2 is constructed to factory specifications.
    N-5.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    $110.00
    N5.2 Shroud 5/32" Roller Swaged

Murrays Part# 002-4205-12 

Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

Compare to Nacra product #9536
    N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $95.00
    N-5.2 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    $90.00
    N5.2 Forestay 5/32" Black Wire

Murrays Part# 002-4245-12



Forestay for Nacra 5.2 is constructed to factory specifications with 5/32" black-coated wire.
    N-5.2 FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    $90.00
    N-5.2 JIB HALYARD WITH SHACKLE
    Murrays Sports
    $85.00
    Hobie Sol Cat 18 Trapeze Wires
(2 Handles)



Trapeze Wire set for single trapeze.

Use this page to order product numbers:

002-6253-01
002-6253-02
    Hobie Sol Cat 18 Trapeze Wires
(2 Handles)



Trapeze Wire set for single trapeze.

Use this page to order product numbers:

002-6253-01
002-6253-02
    White Black
    N-5.2 TRAPEZE WIRES (2)
    Murrays Sports
    $80.00
    N-5.2 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    $80.00
    JIB CLEW BLOCK KIT
    Murrays Sports
    $51.95
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    $45.00
    Ronstan Red Trapeze Handles -Rope Style

Murrays Part# 21-5122R




Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    Ronstan Trapeze Handles -Rope Style
Murrays Part# 21-5122R
Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs
    RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    $39.55
    Quick-Release Pin Deluxe 1/4 X 3/4
Murrays Part# 18-4M075
This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    $35.00
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard

Murrays Part# 18-4M150L



This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place.

This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin,



Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP

Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    $30.00
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black.  Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    White Black
    11" SHROUD ADJUSTER COVERS
    Hobie
    $22.99
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    $19.99
    ELONGATED TRAPEZE RING

Large trapeze ring made of solid 316 stainless steel for strength and longevity.

AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring. 

Hobie part number 2002, compare to Hobie part number 2001

Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    $17.99
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway

Murrays Part# 001-8019

A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    $12.00
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin

Murrays Part# 22-9802


Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole). 


Uses:

Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans.

Hobie 18 gooseneck vertex pin

Hobie 18 outhaul car sheave pin

Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    $2.00
    3/16 - 1/4" Split Ring with Pigtail
Murrays Part# 22-9491
A pigtail makes this split ring (ring ding) easier to open than standard split rings.

For use on 3/16″ – 1/4″ clevis pins
Material: 316 Stainless steel.
Medium Split ring
Dimensions: 5/8″ Diameter
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans.
Applications:
All Hobies Shroud and Forestay split ring
H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring
Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    3/16 - 1/4" SPLIT RING WITH PIGTAIL
    Misc
    $0.75
    Cotter Pin 3/32 X 3/4
Murrays Part# 19-1015
Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111.
Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc
    $0.18
    Out of Stock
    N-5.2 TRAPEZE WIRES (2 HANDLES)
    Murrays Sports
    $0.00
    Recently viewed