NACRA INTER 17 Rigging

NACRA INTER 17 Rigging

12 products

    Rigging for the Nacra Inter 17.  Shrouds, Forestay, Diamond Wires, Trapeze Wires, and Bridles.

    12 products
    NACRA INTER 17 FORESTAY 5/32" BARE WITH PIGTAIL
    Murrays Sports
    Inter F17 Diamond Wire without Turnbuckle Murrays Part# 002-5294-20 Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.
    INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    NACRA INTER 17 SHROUD 5/32" BLACK WIRE RACE
    Murrays Sports
    Nacra Inter 17 Trapeze Black Wires (2 Handles) Murrays Part# 002-5253-02 The Nacra Inter F17 Trapeze Wires Black (2) basic assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    NACRA INTER 17 TRAPEZE BLACK WIRES (2)
    Murrays Sports
    Nacra Inter 17 Forestay 1/8" Black Murrays Part# 002-5244-02 Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.
    NACRA INTER 17 FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    Nacra Inter 17 Shroud Roller Swaged Murrays Part# 002-5204-12 Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.
    NACRA INTER 17 SHROUD 1/8" ROLLER SWAGED
    Murrays Sports
    Nacra Inter 17 Bridle 1/8" Black Wire Murrays Part# 002-5214-12
    NACRA INTER 17 BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
    Ronstan Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. Each handle weighs
    RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
    Ronstan
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
    Murrays Sports
    3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    3/16 - 1/4" SPLIT RING WITH PIGTAIL
    Misc
    Recently viewed